Atributos químicos do solo e produtividade do milho afetados por corretivos e manejo do solo

A field experiment was carried out in the Lageado Experimental Farm belonging to the São Paulo State University - UNESP, Campus of Botucatu, SP, in a distrophic Nitosoil in 1997/98. The objective was to compare the effects of magnesium termophosphate; termophosphate + lime; termophosphate + phosphogypsum + sugarcane vinnace application on the chemical characteristics of the soil and on the corn (Zea mays L.) yield cultivated in no-tillage and conventional tillage systems. The Crotalaria juncea was cultivated as mulch-producing to make possible the establishment of the tillage systems. The mean modifications in the soil fertility were due to aplication of the magnesium termophosphate. The differences between the two tillage systems, related to crop productivity, were associated to the smaller N content in the corn leaf in the no-tillage system.

Intervalo hídrico ótimo e produtividade de cultivares de soja

The objective of this study was to determine the optimal water interval and its relationship with soybean yield. For this study, an experiment was carried out in Jaboticabal, São Paulo State, Brazil, in a Haplustox medium textured soil. The experimental design consisted of a completely randomized with subdivided plots (six compaction levels and four soybean cultivars), with four replications. The soil compaction levels were: T 0 = 0, T 1* = 1, T 1 = 1, T 2 = 2, T 4 = 4 and T 6 = 6 strides of a 11 ton tractor, on the same place, side by side on soil surface. In T 1* the compaction occurred when the soil was dry. In December, 2003 the soybean (Glycine max), cultivars IAC Foscarin 31, MG/BR 46 (Conquista), BRS/MG 68 (Vencedora) and IAC 8 - 2 were sown. After sowing, indeformed soil samples were collected in layers of 0.03-0.06, 0.08-0.11, 0.15-0.18 and 0.22-0.25 m for determination of soil water content and resistance to penetration curve and the optimal water content. According to model, the critical soil bulk density (Dsc) for soybean yield varied between cultivars from 1.56 to 1.64 Mg m -3. The soil bulk density at which the yield of soybean cultivars decreased was greater than the Dsc.

Correlação da produtividade do feijão com a resistência à penetração do solo sob plantio direto

The soil mechanical resistance to penetration (PR) has great influence on vegetative development as the root growth and the crop productivity change in inverse proportion. Thus, the objective of this research was to study correlation between the bean grain productivity and the PR in an Oxisol cultivated for four years in no-tillage system at FEIS/UNESP. The attributes PR and yield were determined in a regular grid with 119 sample points. The PR was determined in the layers of 0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20 and 0.25-0.30 m. The results were submitted to procedures of descriptive statistics, linear correlation and geostatistic analysis. The linear correlation between the yield and PR was practically null, as in all soil layers investigated it showed determination coefficients (R2) smaller than 0.03 and not significant. The geostatistic analysis showed moderate structure of spatial dependency for PR in the layers of 0.05-0.10 and 0.10-0.15 m, and strong for yield; however, the conjugate spatial analysis of such attributes showed no correlation, therefore, the spatial variability of PR did not influence the yield.

Mapeamento da produtividade e perímetro do tronco de clones de seringueira em argissolo vermelho amarelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos de níveis de cobertura do solo sobre a produtividade e crescimento do feijoeiro irrigado, em sistema de plantio direto

The objective of this research was to study the effects of five different treatments of grass (Brachiaria decumbens) straw mulch on common beans (Phaseolus vulgaris L.): 0% (0 t.ha-1), 25% (2,25 t.ha-1), 50% (4,5 t.ha-1), 75% (6,75 t. ha-1) and 100% (9,0 t/ha) designed by randomized blocks, with four replicates. The irrigation was applied when minimum soil water potential were reached about - 30kPa. The water management based on tensiometers and soil water characteristic curve. A microsprinkler irrigation system was used. The experiment was set up at the Experimental Station of Embrapa Rice and Bean (Empresa Brasileira de Pesquisa Agropecuária Arroz e Feijão) at Santo Antonio de Goiás, Brazil, in a Dark - Red Latosol soil. The results showed: the bean yield and his components were not affected by treatments, except grain number/pod,. The mulch increased the water use efficiency and, consequently, decreased the number of irrigations when the mulch reached more than 50% straw mulch. The treatment with 100% of mulching presented the largest leaf area index and dry matter accumulation was not affected by mulching.

Irrigação por gotejamento subsuperficial na produção e qualidade de cana-de-açúcar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Compactação do solo e intervalo hídrico ótimo no crescimento da parte aérea e produtividade da cultura do milho

The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.

Níveis constitutivos de compostos fenólicos podem estar relacionados à resistência da cana-de-açúcar à cigarrinha-das-raízes

The interaction of the leafhopper-of-roots with the sugar cane is still poorly marked and there is little information on resistant varieties. The phenolic compounds are involved in resistance mechanisms of the antibiosis type, but few studies are devoted to the studying role of these compounds in the interaction of plants with sucking insects. The study was conducted to determine how the sugar cane responded to the infestation of Mahanarva fimbriolata in terms of accumulation of phenolic compounds. An experiment was carried out under controlled conditions in a randomized design in a factorial schedule 3 x 2 x 4, with 3 genotypes and sugar cane, 2 levels of nymphs infestation of M. fimbriolata and sampling 4 times, with 4 repetitions. The genotypes SP80-1816 and RB72454 showed higher levels of total phenols when subjected to an infestation of the pest, but the duration of the nymphal stage and mortality of sharpshooters were significantly lower in those varieties, indicating that the increase in the concentration of phenolic compounds may had been caused by death and decay of the roots. It was not observed variation in levels of total phenols in the variety SP83- 5073 subject to an infestation of M. fimbriolata. However, the mortality of the leafhopperof- roots and duration of the stage of nymphs were significantly higher in genotype, indicating the existence of resistance-type antibiosis. Analysis of correlation showed that higher initial levels of phenolic compounds resulting in mortality of the pest can increase the duration of the nymph stage.

Efeito da aplicação de maturadores químicos na cultura da cana de açúcar (Saccharum spp.) variedade SP81-3250

Sugarcane is one of the most important grass crops. This study evaluated the effects of chemical ripeners on the sugarcane variety SP81-3250 in terms of technological quality. The experiment was arranged in randomized blocks with split split-plots. Main treatments were: 1) Control; 2) Aminolon Maduracion, at a rate of 0.7 L of commercial product (c.p.) ha -1; 3) Aminolon Maduracion, at a rate of 1.0 liter of c.p. ha -1; 4) Aminolon Maduracion, at a rate of 1.3 liter of c.p. ha -1; 5) Trinexapac-ethyl (Moddus), at a rate of 0.8 liter of c.p. ha -1. Secondary treatments were the sampling dates: 10 days before application (- 10 d.a.a.); 11; 46; 71; 100 and 117 d.a.a. (days after application). Ripeners differently affected the technological parameters, and trinexapac-ethyl showed the best behavior, followed by Aminolon (0.7 L of c.p. ha -1). The best results were found at the 3rd and 4th sampling dates, 46 and 71 days after application, respectively.

Influência da queima e aditivos químicos e bacterianos na composição química de silagens de cana-de-açúcar

The objective of this trial was to evaluate the effect of the chemical (urea, sodium benzoate, and sodium hydroxide) and microbiological (Propionibacterium acidipropionici + Lactobacillus plantarum, and Lactobacillus buchneri) additives on the sugarcane nutritive value, ensiled crude or after burned, using a factorial scheme 2 (burned or crude sugar cane) x 6 (five additives urea, sodium benzoate, sodium hydroxide, Propionibacterium acidipropionici + Lactobacillus plantarum, and Lactobacillus buchneri plus control). It was evaluated the sugar cane chemical composition, before and after ensilage. The sugar cane NDF contents increased (51.3%, before ensilage) to 67.8% after fermentation period. The highest true digestible dry matter recovery values, 83.6 and 79.8% were observed on the burned sugar cane silage treated with NaOH or L. buchneri, respectively. The NaOH, and L. buchneri showed more efficiency in reducing nutritive looses during the fermentation phase of the crude or burned sugar cane silage.

Planejamento agrícola e implantação de sistema de cultivo de cana-de-açúcar com auxílio de técnicas geoestatísticas

Sugarcane is one of the most important crops of the Brazilian agribusiness and this importance justifies the use of techniques that allow the implementation of cultivation systems capable of reducing the variability of soil characteristics and the establishment of efficient agricultural planning. The aim of the present work was the planning and implementation of cultivation systems for sugarcane using geostatistical techniques, in the Pereira Barreto region, SP. An area of 505 ha was mapped using the global positioning system (GPS) and a Digital Elevation Model was elaborated (MDE). Soil samples were collected for 0-0.25 m depth, in each 7 ha, for their chemical attributes and texture characterization. Data were analyzed by descriptive statistics and geostatistics. The determination of the spatial distribution of soil granulometric and chemical attributes allowed the allocation of the studied sugarcane varieties according to soil fertility and clay content. The kriging maps of soil granulometric and chemical attributes brought useful information to the establishment of production environments with different soil and crop managements. The identification of different environments by means of geostatistical techniques allowed the precise planning of the sugarcane cultivation, as well as the adequacy of fertilization practices and the allocation of suitable sugarcane varieties adapted to the conditions imposed by differences in the soil attributes.

Nitrogênio em cobertura e molibdênio via foliar em feijoeiro de inverno no sistema plantio direto II - Características agronômicas e produtividade

Nitrogen is the nutrient most uptaken by common bean plant, and molybdenum besides its importance to N fixation process, it is associated to N metabolism. The objective of this work was to evaluate, on common bean crop Pérola cultivar, the effect of N levels application at side dressing (0, 30, 60, 90 and 120 kg ha-1) as well as the leaf application of Mo (0, 80 and 160 g ha-1) at development stadium V3 or V4 under no tillage system. The experimental design was the randomized blocks with 30 treatments and 4 replications. The research was conducted in Selviria-MS on soil previously cropped with corn. The application of nitrogen levels at side dressing provided increasing on dry mass weight, number of pod and seeds per plant and grain yield, in the 2004; the Mo application at V3 or V4 stadia did not effect the production components and grain yield; as well as different doses of Mo depended on the N application at side dressing, in the 2004.

Infuěncia do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m 3sc, with a mean of operating cost of US$ 78.78 per work hour.

Influência das superfícies geomórficas na distribuição espacial dos atributos do solo em área sob cultivo de cana-de-açúcar

Variations in soil attributes occur based on relief forms and parent material. The objective of this research was to study the influences of geomorphic surfaces on the spatial distribution of soil attributes in a sugarcane cultivation area. First, 530,67 hectares were mapped by using a Global Positioning System. Then, a Digital Elevation Model was developed and geomorphic surfaces were identified and delimited, according to topographic and stratigraphic criteria based on detailed field investigations. Soil samples were collected every 7 ha, at 0.0-0.25 m and 0.80-1.00 m depths, totalizing 134 samples. Texture, Ca, K, Mg, SB, CEC, V%, pH, and OMS analyses were carried out as well as descriptive statistics and geostatistics analysis. It was concluded that the geostatistic techniques and digital elevation model helped to notice that soil attributes presented limits close to the geomorphic surfaces ones.

Fungigação no controle do mofo branco e produtividade do feijoeiro em condições de cerrado brasileiro

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.