Distribuição de poros e densidade de latossolos submetidos a diferentes sistemas de uso e manejo

Man cultivates the soil for centuries, but the intensive business and use of the soils under Cerrado vegetation for agricultural production grew out of the seventies. The objective of this study was to evaluate soil physical characteristics as a function of sampling time and the soil uses in a Cerrado area in Uberlandia City - MG, Brazil. The managements were adopted: degraded pasture (M-1), conventional tillage (M-2), minimum tillage (M-3), tillage absence (M-4), no-tillage (NT) for three years (M-5); NT for nine years (M-6), NT for three years after Pinus (M-7), PD for one year after Pinus (M-8) and Pinus forest (M-9) with 25 years old. The evaluations were conducted in 2002/03 growing season, in two areas. The soils were: area 1, an Oxisol (Red Latosol - LV-1, M-1 through M-5) and area 2, two Oxisols (Red Latosol and Red-Yellow Latosol - LVA and LV-2, M-6 through M-9). The physical attributes studied changed depending of the soil class, sampling time and management systems, with emphasis on the area 2 soils, which, in general, better preserved its main physical attributes. Managements with intense tillage, such as the M-2, are the most soil physically degrade, presenting mostly negative changes to soil bulk density, total porosity, microporosity and macroporosity. Since the systems which promote less tillage, in short term, to preserve desirable physical attributes. The M-9 system had the lowest attributes range, compared to the others.

Spatial variability of infiltration and its relationship to some physical properties

Water infiltration into soil is one of the basic factors for estimating irrigation intensity according to the plants' requirements; this is aimed at avoiding problems of surface run-off and degradation. The purpose of the present investigation was to determine the spatial variation of infiltration and its relationship to some physical properties of soil by means of geostatistical techniques in Typic Plinthaquult soils having average texture and flat relief. A 113 point mesh was designned, having a regular distance of 10 m between points, samples being taken from 0 to 0.20 meters depth. Sand, silt and clay content, bulk density, macroporosity, microporosity and total porosity were determined. Infiltration tests were carried out in the field by means of a 15 cm diameter ring. Descriptive statistics and geostatistics were used for analysing the data. Infiltration, silt and microporosity data did not fit a normal distribution curve. Infiltration had high variability, having an average 36.03 mm h(-1). Total porosity was 56.73%, this being the only property that did not show spatial dependency. The smallest ranges were observed for bulk density, macroporosity and microporosity, having values of less than 40 m. The smallest degrees of spatial dependence were observed for infiltration, silt and clay, evidence also being shown of the influence of silt and clay on infiltration rate. Contour maps were constructed; fitting them to the semivariogram models, together with studying the correlations, led to establishing relationships between the properties.

Adubação verde em Citrus: Influência na porosidade e retenção de água de um latossolo vermelho-escuro do noroeste do estado de São Paulo

The objective of this research was to study the porosity, bulk density and retention of water of an Oxisol, located in the Northwestern region of Sn̄o Paulo state, Brazil. The soil was cultivated with Citrus sp., to which green manure was applied between rows for three years. Each of six species of green manure crops (Crotalaria juncea L., Mucuna deeringiana Steph. & Bart., Canavalia ensiformis L. DC., Cajanus cajan L., Lablab purpureum L. and Ricinus communis L.) were seeded for three years (1995, 1996 and 1997) between Citrus rows, plus a treatment with a mix of all six species and a control (natural regrowth af vegetation). The experimental design was a randomized complete block design, with four replications for each of the eight treatments. Water retention, microporosity, macroporosity, total porosity and bulk density were analyzed in the beginning (1995) and end (1997) of the experiment, at three depth ranges (0-0.10; 0.10-0.20 and 0.20-0.40m). We concluded that there were statistically significant differences for bulk density, macroporosity, total porosity and retention of water among the different soil depth ranges; there were no significant differences among treatments though.

Propriedades físicas e infiltração de água de um Latossolo Vermelho Amarelo (Oxisol) do noroeste do estado de São Paulo, Brasil, sob três condições de uso e manejo

This study presents the results obtained in a field experiment carried out at Glicério, Northwest of São Paulo state, Brazil, whose objective was to analyze changes of selected soil physical properties and water infiltration rates on a Yellow-Red Latosol, under three different management conditions. The experimental design was arranged as completely randomized split-block with twelve treatments, which corresponded to four depths (0-0.05 m; 0.05-0.10 m; 0.10-0.20 m and 0.20-0.40 m) and three conditions of soil use and management with four replications. The soil surface conditions were: conventional tillage (one disking with moulboard plus two levelling passes with harrow), nine months before starting filed experiences; recent conventional tillage (also one disking with moulboard plus two levelling passes with harrow) and native forest. The conventional tillage areas were cropped for about fifteen years with annual cultures. The considered soil general physical properties were: macroporosity, microporosity, total porosity, bulk density, soil moisture and penetration resistance and, in addition; soil water infiltration rates were also recorded. According to our results, differences on general soil physical properties and infiltration rates appeared when both tilled sub-treatments and native forest were compared. Both, plots recently prepared by conventional tillage and those prepared by tillage but left nine months in rest, presented a statistically significant decrease of constant (final) water infiltration rates of 92.72% and 91.91% when compared with native forest plots.

Alterações de propriedades físicas de um nitossolo vermelho pela sucessão milheto-soja na fase de implantação do sistema de semeadura direta

The aim of this work was to evaluate the effect of a millet-soybean rotation, during the implantation phase of no-tillage system on the physical properties of a Nitossolo Vermelho distroférrico and the dry mass production of millet and the productivity of soybean. The experimental design used was a randomized blocks, in a split splot arrangement, with four replications. The parcels was constituted by three sowings (E1, E2 and E3) and the subparcels was constituted by harvests, where each harvest handling was: M1 - harvest each blooming and covering withdrawal; M2 - harvest each blooming and covering permanency; M3 - only in the first harvest on blooming and covering withdrawal; M4 - only in the first harvest on blooming and covering permanency, and M5-free growing, with no harvest. Samples were collected from three soil layers: 0-0,05, 0,05-0,10 and 0,10-0,20 m. The E2 showed smaller values of soil density and larger values of total porosity. The E3 resulted in smaller values of flocculation degree and mean weight diameter of the aggregates. The E3 showed smaller production of dry mass.

Compactação do solo e intervalo hídrico ótimo no crescimento da parte aérea e produtividade da cultura do milho

The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.

Atributos químicos e físicos de um solo tratado com biossólido industrial e cultivado com milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do sistema de preparo e manejo de um latossolo vermelho nas suas propriedades físico-hídricas

The intensive use of the land for agricultural propose causes a series of modifications in attributes, which can take to soil degradation. In this context, the main goal of this research was to evaluate the influence of the soil tillage systems and management on its physical and hydric characteristics. The evaluations were carried out in July of 1999, at experimental plots of a Latossolo vermelho, a clay oxisoil, in the Faculdade de Engenharia Agrícola of the UNICAMP, at the county of Campinas, state of São Paulo. These plots were managed with the following treatments, along a period of eight years: no-tillage, chisel ploughing, conventional system with disk ploughing and revolving hoe. The evaluated physical and hydric parameters of the soil were: soil bulk density, particle density, total porosity, macro-porosity, micro-porosity, soil-water retention curve, hydraulic conductivity and basic infiltration. Significant differences were observed between the treatments on soil bulk density, infiltration, total porosity, macro-porosity and the micro-porosity. The chisel ploughing and no-tillage systems presented the higher values of soil bulk density; nevertheless in these conservationist systems were observed the higher values of basic infiltration.

Correlação linear e espacial entre a produtividade e o teor de proteína bruta do guandu anão e os atributos de um Latossolo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atributos físicos do solo em diferentes condições de cobertura vegetal em área de plantio direto

The use of cover crops in the soil causes changes in soil attributes influencing in a series of hydro-physical processes, which also modify the ability of soil to support the many activities that it is intended. Thus, the objective of this study was to evaluate the effect of cover crops on physical attributes of the soil. For this, an experiment was carried out on a Typic Hapludox, Jaboticabal State, Brazil, using cover crops of millet, sunn hemp, jack bean, lab-lab and black velvet bean in no-tillage and fallow area (spontaneous vegetation). The characteristics evaluated were the bulk density, macroporosity, microporosity, total porosity, aggregate stability, penetration resistance and organic matter. The incorporation of cover crops has proved to be a beneficial practice for the physical attributes of the soil, allowing a greater aggregate stability compared to fallow in the depth of 0-0.05 m. All cover crops presented values of soil penetration resistance below the critical value of 2 MPa.

Superfícies geomórficas e atributos do solo em uma toposseqüência de transição várzea-terra firme

Soil attributes reflect influence of the geomorphic surfaces. Therefore, the objective of this work was to investigate the influence of the geomorphic surfaces on soil attributes in a topossequence from low lands to high lands in the Humaitá region, AM. A transect of 4.5 km, from the top of the slope towards the low lands was established and the geomorphic surfaces were identified and limited according to topographic and estratigraphic criteria, based on detailed field investigation. Twenty soil samples were collected in each one of the slope segments within the geomorphic surfaces (G.S.), at the following depths: G.S. I: LAa (0.0-0.16 and 0.48-0.79 m); G.S. II: Lad1 (0.0-0.13 and 0.44-0.70) and Lad2 (0.0-0.10 and 0.30-0.55 m); G.S. III: RYve1 (0.0-0.18 and 0.51-0.89) and RYve2 (0.0-0.23 and 0.58-0.91 m). The sampling depths were determined by the surface and subsurface horizon depths, defined during the soil morphological description. Physical analysis involved particle size distribution, disperse clay, soil and particle density and total porosity. The chemical analysis involved determinations of pH in water and KCl, exchangeable cations, exchangeable Al, total acidity (H+Al), available P, organic carbon. The relief variations contributed to the presence of dystrophic soils in the geomorphic surface I and eutrophic soils in the geomorphic surface III. The multivariate statistical techniques were able to separate three heterogeneous groups, equivalent to the mapped geomorphic surfaces.

Caracterização de terras pretas arqueológicas no sul do Estado do Amazonas

The Archaeological Dark Earth (ADE) soils are characterized by its high fertility, dark color, and presence of pottery fragments. Regarding the formation of ADE, the most widely accepted hypothesis is that anthropogenic processes involving pre-Columbian populations made them. The purpose of this study is to characterize ADE units located in the Southern Amazon Region, in the cities of Apuí and Manicoré. Seven ADE sites were selected, trenches opened and the soil profiles characterized morphologically. Then, samples of each horizon were collected for analyses of the following physical and chemical properties: particle size, water-dispersible clay, flocculation, soil bulk density, particle density, total porosity, pH in water and KCl solutions, Ca2+, Mg2+, K+, Al3+, available P, H+Al, and organic C. Also, total oxides, free oxides and amorphous forms were analyzed. The texture of the anthropic A horizon ranged from sandy loam to clay loam. The pottery fragments and lithic material were found in similar quantities and at similar depths in the A horizons of the studied soil profiles, suggesting some similarity between the anthropogenic factors of formation. The anthropic horizons of profiles P3, P4, and P7 had a eutrophic character and high to very high levels of available phosphorus, compared to P1, P2, P5, and P6, indicating the heterogeneity of the ADEs.

Variabilidade espacial de atributos físicos em um cambissolo háplico, sob diferentes usos na região sul do Amazonas

Considering the importance of knowledge of the spatial distribution of soil properties, the purpose of this study was to evaluate the spatial variability of physical properties in a Cambisolunder different land uses in the southern Amazon region. The study was conducted on three farms with cassava, sugarcane, and agroforestry, in the region of Humaitá, in the south of the State of Amazonas. In these areas, 70 x 70 m grids were established, with a regular spacing of 10 x 10 m and a total of 64 points, where soils were sampled at 0.0-0.10 m depth. Texture (sand, silt, and clay), macroporosity, microporosity, total porosity, bulk density, and aggregate stabilitywere determined. The data were analyzed using descriptive statistics and geostatistics. It was found that the propertiesvaried spatially and that the range of these variations between land uses was different, with the highest variability for the sugarcane management.

Variabilidade espacial dos atributos físicos em um Argissolo Vermelho sob floresta

This study aim to evaluate the spatial variability of soil physical attributes in of Alfissol forest in Manicoré region, AM. The mapping of an agroforestry growing area of 70×70m was made using a regular grid sampling of 10 × 10m. In each grid, soil samples were collected at 0.0-0.2 and 0,40-0,60 m depth, with a total of 128 sample points. Physical analyses were made (texture, soil bulk and particles density, macro and microporosity, total porosity and aggregates stability in water). With the exception of DMG, DMP and class aggregates <1.00 mm had all the physical attributes spatial dependence structure ranging from moderate to weak. Values were above the range established in the mesh (12.00 to 45.56 m), enabling to make a basis for future studies in forest area. The physical attributes presented in kriging maps different spatial behavior, however there are relationships between these attributes shown by geostatistics proving that this is effective tool for studies in forest area.

Morfo-anatomia de raízes tuberosas de mandioca (Manihot esculenta Crantz) cultivar IAC 576-70 em diferentes preparos do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)