A flow-injection-ICP system sequential multielemental analysis with simultaneously mercury(II) preconcentration step

A flow-injection system for multielemental analysis with a mercury(II) preconcentration step using a resin Chelite-S(R)(Serva Feinbiochemica Heidelberg, Part No. 41709) packed minicolumn by inductively coupled plasma atomic emission spectroscopy is described. A mercury reductive elution procedure with a mixture of SnCl2/HCl was used, which allows use of 6 mol/L HCl solution instead of concentrated hydrochoric acid. The main parameters related to ICP operation, such as radio frequency power (950-1750 W), auxiliary argon flow (0.0-1.5 L/min) and spray chamber nebulizer pressure (15-35 psi), were studied. Optimization of the FIA system was reached by defining the best eluent carrier stream (1.4-2.8 mL/min), Hgdegrees carrier stream (10-40 mL min(-1)), loading time (0.5-4.0 min), sample flow rate (1.25-10.0 mL/min), temperature of reactor gas liquid separator (GLS) (25-75 degreesC) and eluent volume (50-350 muL). Throughput is around 30 samples per hour for analytical solutions within the range 50-2500 ng Hg(II)/L. Results from certified material showed good precision (RSD < 3%, n = 12) and no statistical difference was observed for real samples analyzed by AAS and by the proposed system.

Analysis of the inflammatory reaction induced by the catfish (Cathorops spixii) venoms

Cathorops spixii is one of the most abundant venomous fish of the southeastern coast of the State of São Paulo, and consequently causes a great part of the accidents seen there. The accidents affect mainly fishermen, swimmers and tourists and are characterized by punctiform or wide wounds, erythema, edema, pain, sudoresis, indisposition, fever, nausea, vomiting and secondary infection. The objective of this work was to characterize the inflammatory response induced in mice by both venoms (mucus and sting) of the catfish C spixii. Our results demonstrated that both venoms induced a great number of rolling and adherent leukocytes in the post-capillary venules of cremaster muscle of mice, and an increase in the vascular permeability in peritoneal cavity. Mucus induced the recruitment of neutrophils immediately after injection followed later by macrophage infiltration. In contrast, the cellular infiltration elicited by sting venom was rapidly resolved. The peritonitis reaction provoked by venoms was characterized by cytokine (IL-6), chemokines (MCP-1 and KC) or lipid mediator (LTB4) production in the peritoneal cavity. The macrophages from 7-day mucus venom-induced exudates upon in vitro mucus venom stimulation, expressed CD1 Ic x MHC class II and release bioactive IL-12p70. on the other hand, sting venom-elicited peritoneal macrophages lost the ability to differentiate into dendritic cells, following re-stimulation in vitro with sting venom, they do not express CD11c, nor do they exhibit sufficient levels of MHC class II. In conclusion, both types of venoms (mucus or sting) promote inflammatory reaction with different profiles, and the inflammatory reaction induced by the first was characterized by antigen persistence in peritoneal cavity that allowed the activation of phagocytic cells with capacity of antigenic presentation. (C) 2007 Elsevier Ltd. All rights reserved.

CYTOGENETIC ANALYSIS OF THE BRAZILIAN BLIND CATFISH PIMELODELLA-KRONEI AND ITS PRESUMED ANCESTOR, P-TRANSITORIA

Karyotypes of the blind catfish Pimelodella kronei from three different caves in the southwestern part of the State of São Paulo, Brazil, and of its presumed ancestor Pimelodella transitoria were examined. Chromosome number and formula, as well as C-banding pattern and NOR location were found to be the same in both species, supporting the hypothesis of a close relationship and even conspecificity of P. kronei and P. transitoria.

Fibrin adhesive implant in wound healing repair of dental sockets with topical application of epsilon aminocaproic acid: Histological analysis

The aim of the study was to evaluate wound healing repair of dental sockets after topical application of 5% epsilon-aminocaproic acid (EACA) and the use of fibrin adhesive implant in rats under anticoagulant therapy with warfarin. Sixty Albinus wistar rats were used, divided into three groups of 20. In Group I, the animals were given 0.1 mL/100 mg of 0.9% saline solution per day, beginning 6 days before dental extraction and continuing throughout the experimental period. In Group II, the animals received 0.03 mL of sodium warfarin daily, beginning 6 days before the surgery and continuing until the day of sacrifice; after tooth extractions, the sockets were filled with fibrin adhesive material. In Group III the animals were treated as in Group II, and after extractions, the sockets were irrigated with 5 mL of 5% EACA and filled with the same fibrin adhesive material. All groups presented biological phases of wound healing repair, the differences being evident only in the chronology. The results obtained in Group III were very similar to those of Group I in the last period of wound repair, whereas Group II presented a late chronology compared to the other groups. © 2005 Wiley Periodicals, Inc.

Tensile strength of radio frequency cold plasma treated PET fibers - Part 1: Influence of environment and treatment time

This article reports on a series of experiments with polyethylene terepthalate (PET) treated in a radio frequency plasma reactor using argon and oxygen as a gas fuel, for treatment times equal to 5 s, 20 s, 30 s, and 100 s. The mechanical strength modification of PET fibers, evaluated by tensile tests on monofilaments, showed that oxygen and argon plasma treatment resulted in a decrease in the average tensile strength compared with the untreated fibers. This reduction in tensile strength is more significant for argon plasma and is very sensitive to the treatment time for oxygen plasma. Scanning electron microscopy (SEM) used to analyze the effects of cold plasma treatment on fiber surfaces indicates differences in roughness profiles depending on the type of treatments, which were associated with variations in mechanical strength. Differences in the roughness profile, surveyed through an image analysis method, provided the distance of roughness interval, D-ri. This parameter represents the number of peaks contained in a unit length and was introduced to correlate fiber surface condition, before and after cold plasma treatments, and average tensile strength. Statistical analysis of experimental data, using Weibull cumulative distribution and linear representation, was performed to explain influences of treatment time and environmental effects on mechanical properties. The shape parameter, alpha, and density parameter, beta, from the Weibull distribution function were used to indicate the experimental data range and to confirm the mechanical performance obtained experimentally.

GEOGRAPHIC-VARIATION IN APIS-CERANA-INDICA F - A SPATIAL AUTOCORRELATION ANALYSIS OF MORPHOMETRIC PATTERNS

Spatial patterns of morphometric variation in Apis cerana indica were analysed. Factor and spatial autocorrelation analyses were applied to 29 characters, measured in 17 populations in India. Correlograms showed that 15 characters are patterned geographically, and 13 of them are related to overall size. These characters are distributed as a north-south cline, probably reflecting adaptations to environmental conditions. However, the great number of characteristics without geographical pattern suggests that part of the morphometric variability is due to local stochastic divergences.

Does alveolar soft-part sarcoma exhibit skeletal muscle differentiation? An immunocytochemical and biochemical study of myogenic regulatory protein expression

There has been persistent controversy regarding the nature of cell differentiation in alveolar soft-part sarcoma (ASPS) since its first description in 1952. Some studies suggest that ASPS might represent an unusual variant of skeletal muscle tumor, Given the availability of new monoclonal antibodies to probe for skeletal muscle differentiation and the rapid advance in immunocytochemical techniques for deparaffinized, formalin-fixed tissue sections, we wished to test the proposed hypothesis that ASPS might represent a new type of rhabdomyosarcoma Twelve archival samples of ASPS were retrieved, and we investigated the expression of two myogenic regulatory proteins, MyoD1 and myogenin, as rvell as other muscle-associated proteins, using sensitive immunocytochemical techniques. Despite the presence of desmin immunostaining in six ASPSs, no tumors were positive for either muscle actin or myoglobin Most importantly, no specimen showed nuclear expression of MyoD1 or myogenin, In 11 tumors, however, there was considerable granular immunostaining in the tumor cell cytoplasm with the anti-MyoD1 monoclonal antibody 5.8A, a phenomenon observed in various nonmuscle normal and neoplastic tissues with this antibody, To analyze the exact nature of immunostaining of MyoD1 and desmin in ASPS, biochemical analyses using available fresh frozen tumor tissue were performed, Although a 53-kDa band was noted with antidesmin antibody on Western blot analysis, no specific protein band that corresponds to the 45-kDa MyoD1 was detected with antibody 5.8A. These results confirm the presence of desmin in ASPS but argue against authentic expression of MyoD1, They also suggest that the cytoplasmic immunostaining observed with anti-MyoD1 antibody 5.8A most likely represents a nonspecific cross-reaction with an unknown cytoplasmic antigen, Considering the master role that MyoD1 and myogenin play in skeletal muscle commitment and differentiation and the lack of expression of these two proteins in ASPS as determined immunocytochemically and biochemically, we think that the histogenesis of ASPS remains unknown.

Stability analysis of the attitude of artificial satellites subject to gravity gradient torque

Using a canonical formulation, the stability of the rotational motion of artificial satellites is analyzed considering perturbations due to the gravity gradient torque. Here Andoyer's variables are used to describe the rotational motion. One of the approaches that allow the analysis of the stability of Hamiltonian systems needs the reduction of the Hamiltonian to a normal form. Firstly equilibrium points are found. Using generalized coordinates, the Hamiltonian is expanded in the neighborhood of the linearly stable equilibrium points. In a next step a canonical linear transformation is used to diagonalize the matrix associated to the linear part of the system. The quadratic part of the Hamiltonian is normalized. Based in a Lie-Hori algorithm a semi-analytic process for normalization is applied and the Hamiltonian is normalized up to the fourth order. Once the Hamiltonian is normalized up to order four, the analysis of stability of the equilibrium point is performed using the theorem of Kovalev and Savichenko. This semi-analytical approach was applied considering some data sets of hypothetical satellites. For the considered satellites it was observed few cases of stable motion. This work contributes for space missions where the maintenance of spacecraft attitude stability is required.

Analysis of cement slurries by inductively coupled plasma optical emission spectrometry with axial viewing

The feasibility of Portland cement analysis by introduction of slurries in an inductively coupled plasma optical emission spectrometer (ICP-OES) with axial viewing has been evaluated. After a fast manual grinding of the cement samples, owing to the pulverized state of this material, 0.1% m/v slurries were prepared in 1% v/v HCl. The calibration was performed adopting two strategies: one based on slurries prepared from different masses (50, 75, 100 and 125 mg) of a Portland cement standard reference material (NIST SRM 1881), and the other one based on aqueous reference solutions. A complete analysis of cement for major (Al, Ca, Fe, Mg and Si), minor and trace elements (Mn, P, S, Sr and Ti) was accomplished. Both strategies led to accurate results for commercial Portland cement samples, except for Si and Ti. for which the calibration with aqueous reference solutions resulted in low values. Applying a paired t-test it was shown that most results were in agreement at a 95% confidence level with a conventional fusion decomposition procedure. The ICP-OES with axial viewing and end-on gas configuration for removal of the recombination plasma zone was effective for cement slurry analysis without any undesirable particle deposition in the pre-optics interface and without severe spectral interferences. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Solid-state reactions of mercury with pure noble metals - Part 2. Mercury-iridium system

Thermogravimetry, cyclic voltammetry and other analytical techniques were used to study the reactions of mercury with pure iridium. The results allowed to suggest when subjected to heat or anodic stripping voltammetry an electrodeposited mercury film reacts with Ir substrate and at least three mass loss steps and three peaks appear in the mercury desorption process. The first two were attributed to Hg(0) species removal like a mercury bulk and a mercury monolayer. The last can be ascribed to the mercury removal from a solid solution with iridium.

Ceramic raw materials from the State of Maranhao, Brazil. Part 1: chemical and mineralogical characterization and technological properties of clays from Sao Luis, Rosario, Pinheiro and Mirinzal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of polymerization on the synthesis of SrTiO3: Part I. Characteristics of the polymeric precursors and their thermal decomposition

The influence of polymerization on the thermal decomposition of polymeric precursors and phase formation was investigated during synthesis of SrTiO3. The precipitation of polymeric precursor in acetone produced a more thermal stable precursor with lower weight loss during decomposition. This more stable precursor retarded the formation of the SrTiO3 phase. From thermal analysis, XRD and FT-IR the presence of an intermediate phase during decomposition of the precursors was observed. This is a mixed (Sr,Ti) carbonate phase with the proposed composition of Sr2Ti2O5.CO3. © 1995.

Ceramic coating for refractories protection against carbon oxidation, Part 1: Protection mechanisms

For retarding carbon oxidation in refractories during the preheating of metallurgical furnaces, a ceramic coating, made mainly of sodium phosphosilicate and clay was developed. The coating presents high adherence to the substrate with no swelling. The coating was characterized by thermal analysis, X-ray diffraction at room temperature (XRD) and at high temperature (HTXRD), X-ray fluorescence and scanning electronic microscopy (SEM). The glass transition temperature is reached at 800 °C and only glassy phase is observed above this temperature. Thus the mechanism of protection seems to be the formation of a glassy phase on the surface of the refractory, and the coating tends to be more efficient at temperatures higher than 800 °C.

Finite element analysis of anisotropic optical waveguide with arbitrary index profile

This work presents the application of a scalar finite element formulation for Ex (TE-like) modes in anisotropic planar and channel waveguides with diagonal permittivity tensor, diffused in both transversal directions. This extended formulation considers explicitly both the variations of the refractive index and their spatial derivates inside of each finite element. Dispersion curves for Ex modes in planar and channel waveguides are shown, and the results compared with solutions obtained by other formulations.

Time analysis for temporary gravitational capture: Satellites of Uranus

We study the problem of gravitational capture in the framework of the Sun-Uranus-particle system. Part of the space of initial conditions is systematically explored, and the duration of temporary gravitational capture is measured. The location and size of different capture-time regions are given in terms of diagrams of initial semimajor axis versus eccentricity. The other initial orbital elements - inclination (i), longitude of the node (Ω), argument of pericenter (ω), and time of pericenter passage (τ) - are first taken to be zero. Then we investigate the cases with ω = 90°, 180°, and 270°. We also present a sample of results for Ω = 90°, considering the cases i = 60°, 120°, 150°, and 180°. Special attention is given to the influence of the initial orbital inclination, taking orbits initially in opposition at pericenter. In this case, the initial inclination is varied from 0° to 180° in steps of 10°. The success of the final stage of the capture problem, which involves the transformation of temporary captures into permanent ones, is highly dependent on the initial conditions associated with the longest capture times. The largest regions of the initial-conditions space with the longest capture times occur at inclinations of 60°-70° and 160°. The regions of possible stability as a function of initial inclination are also delimited. These regions include not only a known set of retrograde orbits, but also a new sort of prograde orbit with inclinations greater than zero.