Atividade microbiana em solos, influenciada por resíduos de algodão e torta de mamona

Microbial activity constitutes a good indicator of soil quality, and is influenced by the addition of carbon in the system serving as a substrate for microorganisms that increase their activity and release of CO2, comprising the edaphic respiration of the soil. The objective of this study was to evaluate the microbial activity in different soil types with the addition of cake press of castor bean and cotton textile residue. The study was conducted in a greenhouse at the headquarters of Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Cotton in randomized block design in 4 x 3 factorial arrangement with four replications. At predetermined intervals of 4 days, the containers were opened and the solution of NaOH titrated with HCl 2N in the presence of acid/base indicator phenolphthalein. After reading, the same amount of NaOH was added and the containers were closed again. The difference between the amounts of acid needed to neutralize the sodium hydroxide in a control container and the treatments was equivalent to the amount of carbon dioxide produced by soil microorganisms. It was found that the residues influenced the microbial activity in different soil types, especially in the initial determinations, presenting themselves as good sources for mineralization and nutrient supply, the castor bean proportionating higher cumulative release of CO2 by microorganisms.

Condutividade hidráulica e resistência à penetraçao do solo influenciada por diferentes sistemas de manejo

Soil management measures that increase the efficiency of organic matter cycling and maintain favorable soil structure are needed for improving soil quality. On the other hand, soil structure degradation due to inadequate soil management systems is widespread. Among the indicators of soil physical quality, saturated hydraulic conductivity and penetration resistance are thought to be sensitive to soil management system. The aim of this work was to study the influence of soil tillage system and organic fertilization on selected soil physical properties after the first year of treatment. The field work was conducted in Selviria, MS, Brazil on an Oxisol. The experimental design was randomized complete blocks with split-plots, with 12 treatments and 4 repetitions. Tillage treatments included conventional ploughing (CT) and direct drilling (DD). Fertilizer treatments were: 1) manure, 2) manure plus mineral, 3) traditional mineral 4) plant residues of Crotalaria juncea, 5) plant residues of Pennisetum americanum and 6) control plot. The plots were cropped to bean in winter and to cotton in summer, and both cultures were irrigated. After one year no significant differences between treatments in mechanical resistance and porosity were found. However, saturated hydraulic conductivity and infiltration were higher in the conventional tillage treatment at the 0.00-0.10 m depth. Moreover, an improvement in soil physical condition by organic fertilizers was shown.

Propriedades físicas e indicador de qualidade de um latossolo vermelho submetido a diferentes sistemas de uso e manejo

The conventional system for soil management and preparation has the intensive mechanization as its basic principle and that changes soil properties, especially physical ones, faster and significantly. This study aimed to obtain and compare physical properties such as distribution of particle sizes, density, distribution of pore sizes, curves of water retention and degradation index of a Red Latosol, under intensive cultivation and no-cultivation for six years. Soil samples were collected at depths of 0.1, 0.2, 0.3, 0.4, 0.6, 0.8 and 1.0 m. There was a clay increment as a result of cultivated soil increase. The no-till soil density decreased as depth increased; however, in the arable layer (0.3 m) of the cultivated soil, the opposite was verified. The largest volume of pores was verified in the cultivated soil, especially in the superficial layers. In the smallest applied tension (0.001 MPa), the cultivated soil retained more water; however, starting from 0.033 MPa, the highest humidity values occurred in the no-till soil. The highest degradation index was observed at a depth of 0.1 m in no-till soil. However, that value was superior (0.020) to what is physically considered very poor soil.

Variabilidade dos atributos de um latossolo vermelho sob plantio direto no cerrado brasileiro e produtividade da soja

The spatial variability of several soil attributes (bulk density, penetration resistance, water content, organic matter content and pH) as well as soybean yield have been assessed during the 2007/08 growing season, in Selviria (MS) in a Hapludox (Typic Acrustox), under no tillage. The objectives were to assess the spatial variability of soil and plant parameters at the small plot scale and to select the best soil attribute explaining most the variability of agricultural productivity. Soil and plant were sampled on a grid with 121 points within a plot of 25,600 m 2 in area and slope of 0.025 mm -1 slope. Medium and low coefficients of variation were obtained for most of the studied soil attributes as expected, due to the homogenizing effect of the no-till system on the soil physical environment. From the standpoint of linear regression and spatial pattern of variability, productivity of soybeans could be explained according to the hydrogen potential (pH). Results are discussed taken into account that the soybean crop in no-tillage is widely used in crop-livestock integration on the national scene.

Aggregate shape and tensile strength measurement

Tensile strength (TS) of soil aggregates is an important indicator of soil quality. However, TS varies with aggregate shape. Thus, the objective of this study was to quantify the influence of aggregate shape on TS and propose a shape standardization protocol to increase accuracy in the measurement of TS. The latter was determined on 7,560 aggregates divided into three shapes, (i) irregular shape (IS), (ii) spherical shape (SS), and (iii) flat surface (FS), while preserving the inherent structure of the aggregate. The aggregates with IS had a larger range in the TS (306 kPa) because of the shape variability when compared with SS (238 kPa) and FS (129 kPa). The TS determined in aggregates with FS had smaller coefficient of variation (46%) in comparison with those of IS (70%) and SS (66%), indicating that the aggregate uniformity reduced the influence of shape on the TS. A smaller force (42.12 kPa) was needed to rupture aggregates with FS than IS (58.43 kPa) and SS (56.89 kPa) because of better force distribution in causing the tensile stress. The use of aggregates with the FS enables an accurate assessment of TS in relation to a wide range of management treatments. Copyright © 2013 by Lippincott Williams & Wilkins.

Atributos físicos de um Latossolo Vermelho distrófico degradado em resposta à aplicação de biossólidos

Sewage sludge, waste with high organic matter content and rapid decomposition, combined with sawdust, rich in carbon and slow decomposition, are suitable components for the study of degraded areas. In order to test the interactions of these residues in the recovery of a degraded soil in Selvíria - MS, four doses of sewage sludge (0, 8, 16 and 24 t ha -1, dry basis ) and four doses of sawdust particles (0, 8, 16 and 24 t ha-1, dry basis ) were tested in February 2009, in a completely randomized block design (4 × 4 + 1 factorial), with four replications. As indicators of the effects, the penetration resistance, gravimetric moisture and soil bulk density (0-0.10, 0.10-0.20; 0.20-0.40 m) were used. Significant effects were observed for the factors (sewage sludge and sawdust) and control treatment for penetration resistance in the soil depths studied, for gravimetric moisture in the intermediate layer and for the soil density in the surface and intermediate layers. Considering the type of soil and the short period of study (24 months), the use of organic wastes presented improvement in physical properties of soil in relation to control. However, it is necessary to study them for a longer period.

Análise de imagens no estudo da porosidade em latossolo cultivado com batata (Solanum tuberosum L.) sob dois sistemas de irrigação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de fragmentos florestais nativos sobre os parâmetros químicos, físicos e microbiológicos de solos cultivados com cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atributos químicos e bioquímicos em solos degradados por mineração em ecossistema amazônico em recuperação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Suscetibilidade magnética na identificação de compartimentos da paisagem e indicador de qualidade do solo em áreas sob cultivo de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Substâncias húmicas e agregação de um latossolo vermelho eutroférrico sob diferentes usos e manejos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Indicadores de qualidade de um Latossolo Vermelho após onze anos em sistemas de cultivos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fragilidade ambiental e qualidade dos solos em duas bacias hidrográficas de uso rural, em Ibiúna, SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da qualidade e quantidade do carbono e do nitrogênio no solo em Iperó-SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

Propriedades microbiológicas do solo alteradas por compactação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)