Esterase profile in a pyrethroid-resistant Brazilian strain of the cattle tick Boophilus microplus (Acari, Ixodidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Static and Cyclic Loading on Ceramic Laminate Veneers Adhered to Teeth with and Without Aged Composite Restorations

Purpose: Existing composite restorations on teeth are often remade prior to the cementation of fixed dental prostheses. The aim of this study was to evaluate the effect of static and cyclic loading on ceramic laminate veneers adhered to aged resin composite restorations.Materials and Methods: Eighty sound maxillary incisors were collected and randomly divided into four groups: group 1: control group, no restorations; group 2: two Class III restorations; group 3: two Class IV restorations; group 4: complete composite substrate. Standard composite restorations were made using a microhybrid resin composite (Anterior Shine). Restored teeth were subjected to thermocycling (6000 cycles). Window preparations were made on the labial surface of the teeth for ceramic laminate fabrication (Empress II). Teeth were conditioned using an etch-and-rinse system. Existing composite restorations representing the aged composites were silica coated (CoJet) and silanized (ESPE-Sil). Ceramic laminates were cemented using a bis-GMA-based cement (Variolink Veneer). The specimens were randomly divided into two groups and were subjected to either static (groups 1a, 2a, 3a, 4a) or cyclic loading (groups 1b, 2b, 3b, 4b). Failure type and location after loading were classified. Data were analyzed using one-way ANOVA and Tukey's test.Results: Significantly higher fracture strength was obtained in group 4 (330 +/- 81 N) compared to the controls in group 1 (179 +/- 120 N) (one-way ANOVA, p < 0.05). Group lb survived a lower mean number of cyclic loads (672,820 cycles) than teeth of groups 2b to 4b (846x10(3) to 873x10(3) cycles). Failure type evaluation after the fracture test showed predominantly adhesive failures between dentin and cement, but after cyclic loading, more cohesive fractures in the ceramic were seen.Conclusion: Ceramic laminate veneers bonded to conditioned aged composite restorations provided favorable results. Surface conditioning of existing restorations may eliminate the necessity of removing aged composite restorations.

Flexural Strength of Glass-Infiltrated Zirconia/Alumina-Based Ceramics and Feldspathic Veneering Porcelains

Purpose: To compare the flexural strength of two glass-infiltrated high-strength ceramics and two veneering glass-ceramics.Materials and Methods: Four ceramic materials were tested: two glass-infiltrated high-strength ceramics used as framework in metal-free restorations [In-Ceram Zirconia IZ (Gr1) and In-Ceram Alumina IA (Gr2)], and two glass-ceramics used as veneering material in metal-free restorations [Vita VM7 (Gr3) and Vitadur-alpha (Gr4)]. Bar specimens (25 x 5 x 2 mm(3)) made from core ceramics, alumina, and zirconia/alumina composites were prepared and applied to a silicone mold, which rested on a base from a gypsum die material. The IZ and IA specimens were partially sintered in an In-Ceram furnace according to the firing cycle of each material, and then were infiltrated with a low-viscosity glass to yield bar specimens of high density and strength. The Vita VM7 and Vitadur-alpha specimens were made from veneering materials, by vibration of slurry porcelain powder and condensation into a two-part brass Teflon matrix (25 x 5 x 2 mm(3)). Excess water was removed with absorbent paper. The veneering ceramic specimens were then removed from the matrix and were fired as recommended by the manufacturer. Another ceramic application and sintering were performed to compensate the contraction of the feldspar ceramic. The bar specimens were then tested in a three-point bending test.Results: The core materials (Gr1: 436.1 +/- 54.8; Gr2: 419.4 +/- 83.8) presented significantly higher flexural strength (MPa) than the veneer ceramics (Gr3: 63.5 +/- 9.9; Gr4: 57.8 +/- 12.7).Conclusion: In-Ceram Alumina and Zirconia were similar statistically and more resistant than VM7 and Vitadur-alpha.

Bond strengths, degree of conversion of the cement and molecular structure of the adhesive-dentine joint in fibre post restorations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A retrospective look at esthetic resin composite and glass-ionomer Class III restorations: A 2-year clinical evaluation

Objective: A restorative material for Class III cavities must, besides being functional, be esthetically satisfactory, providing good working conditions and several shade and color options. A clinical evaluation was initiated to compare the suitability of resin composite and glass-ionomer cement materials for such restorations.Method and materials: Forty-two Class III conservative cavities, esthetically important because of facial extensions, were selected. Resin composite restorations were placed in 21 cavities, and the remaining 21 were restored with glass-ionomer cement. The following characteristics were studied: color or-esthetics, anatomic shape, surface texture, staining, marginal infiltration, dental plaque retention, and occurrence of fracture. After 24 months, the restorations were evaluated.Results: the only statistically significant difference between the resin composite and glass-ionomer cement restorations in the experimental period involved color or esthetics.Conclusion: Resin composites and glass-ionomer materials provide excellent functional and esthetic results in Class III cavities when properly indicated.

Highly corrosion resistant siloxane-polymethyl methacrylate hybrid coatings

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic markers between Biomphalaria glabrata snails susceptible and resistant to Schistosoma mansoni infection

The analysis of the genetic variability related to susceptibility to Schistosoma mansoni infection in the vector of the genus Biomphalaria is important in terms of a better understanding of the epidemiology of schistosomiasis itself, the possible pathological implications of this interaction in vertebrate hosts, and the formulation of new strategies and approaches for disease control. In the present study, the genetic variability of B. glabrata strains found to be resistant or susceptible to S. mansoni infection was investigated using DNA amplification by random amplified polymorphic DNA-polymerase chain reaction (RAPD-PCR). The amplification products were analyzed on 8% polyacrylamide gel and stained with silver. We selected 10 primers, since they have previously been useful to detect polymorphism among B. glabrata and/or B. tenagophila. The results showed polymorphisms with 5 primers. Polymorphic bands observed only in the susceptible strain. The RAPD-PCR methodology represents an adequate approach for the analysis of genetic polymorphisms. The understanding of the genetic polymorphisms associated to resistance may contribute to the future identification of genomic sequences related to the resistance/susceptibility of Biomphalaria to the larval forms of S. mansoni and to the development of new strategies for the control of schistosomiasis.

Characterization of ndh gene of isoniazid resistant and susceptible Mycobacterium tuberculosis isolates from Brazil

Resistance in Mycobacterium tuberculosis to isoniazid (INH) is caused by mutations in the catalase-peroxidase gene (katG) , and within the inhA promoter and/or in structural gene. A small percentage (~ 10%) of INH-resistant strains do not present mutations in both of these loci. Other genes have been associated with INH resistance including the gene encoding for NADH dehydrogenase (ndh) . Here we report the detection of two ndh locus mutations (CGT to TGT change in codon 13 and GTG to GCG change in codon 18) by analyzing 23 INH-resistant and in none of 13 susceptible isolates from Brazilian tuberculosis patients. We also detected two isolates without a mutation in ndh, or any of the other INH resistance-associated loci examined, suggesting the existence of additional, as yet to be described, INH resistance mechanisms.

Nasopharyngeal colonization with methicillin-resistant staphylococcus aureus and mortality among patients in an intensive care unit

A colonização de nasofaringe por Staphylococcus aureus, resistente à meticilina (Methicillin-resistant S.aureus - MRSA), é comum em pacientes criticamente doentes, mas seu significado prognóstico não é inteiramente conhecido. Realizou-se estudo de coorte retrospectivo com 122 pacientes de uma unidade de terapia intensiva que realizaram triagem semanal para colonização por MRSA. Os desfechos de interesse foram: mortalidade geral e mortalidade por infecção. Diversas variáveis de exposição (gravidade, procedimentos, intercorrências e colonização nasofaríngea por MRSA) foram analisadas em modelos univariados e multivariados. Fatores significativamente associados à mortalidade geral ou por infecção foram: APACHE II e doença pulmonar. A colonização por MRSA não foi preditora de mortalidade geral (OR=1,02; IC95%=0,35-3; p=0,97) ou por infecção (OR=0,96; IC95%=0,33-2,89; p=0,96). Os resultados sugerem que, na ausência de fatores de gravidade, a colonização por MRSA não caracteriza pior prognóstico.

Case-case-control study of risk factors for nasopharyngeal colonization with methicillin-resistant Staphylococcus aureus in a medical-surgical intensive care unit

Nasopharyngeal colonization with methicillin-resistant Staphylococcus aureus (MRSA) often precedes the development of nosocomial infections. In order to identify risk factors for MRSA colonization, we conducted a case-case-control study, enrolling 122 patients admitted to a medical-surgical intensive care unit (ICU). All patients had been screened for nasopharyngeal colonization with S. aureus upon admission and weekly thereafter. Two case-control studies were performed, using as cases patients who acquired colonization with MRSA and methicillin-susceptible S. aureus (MSSA), respectively. For both studies, patients in whom colonization was not detected during ICU stay were selected as control subjects. Several potential risk factors were assessed in univariate and multivariable (logistic regression) analysis. MRSA and MSSA were recovered from nasopharyngeal samples from 27 and 10 patients, respectively. Independent risk factors for MRSA colonization were: length-of-stay in the ICU (Odds Ratio [OR]=1.12, 95%Confidence Interval[CI]=1.06-1.19, p<0.001) and use of ciprofloxacin (OR=5.05, 95%CI=1.38-21.90, p=0.015). The use of levofloxacin had a protective effect (OR=0.08, 95%CI=0.01-0.55, p=0.01). Colonization with MSSA was positively associated with central nervous system disease (OR=7.45, 95%CI=1.33-41.74, p=0.02) and negatively associated with age (OR=0.94, 95%CI=0.90-0.99, p=0.01). In conclusion, our study suggests a role for both cross-transmission and selective pressure of antimicrobials in the spread of MRSA.

Comparative ''in vitro'' study on the susceptibility and emergence of mutants resistant to danofloxacin and ciprofloxacin among Staphylococcus aureus isolated from bovine mastitis

The antimicrobial susceptibility of danofloxacin was compared in vitro with ciprofloxacin against mastitogenic Staphylococcus aureus. Danofloxacin was more active than ciprofloxacin, showing minimal inhibitory concentrations (MIC90), minimal bactericidal concentrations (MBC90) and MBC/MIC ratio lower than those of ciprofloxacin. Ciprofloxacin-resistant mutants occurred at higher frequencies (greater than or equal to 10(-6)) than for danofloxacin (10(-9)).

Crystallographic and pre-steady-state kinetics studies on binding of NADH to wild-type and isoniazid-resistant enoyl-ACP(CoA) reductase enzymes from Mycobacterium tuberculosis

An understanding of isoniazid (INH) drug resistance mechanism in Mycobacterium tuberculosis should provide significant insight for the development of newer anti-tubercular agents able to control INH-resistant tuberculosis (TB). The inhA-encoded 2-trans enoyl-acyl carrier protein reductase enzyme (InhA) has been shown through biochemical and genetic studies to be the primary target for INH. In agreement with these results, mutations in the inhA structural gene have been found in INH-resistant clinical isolates of M. tuberculosis, the causative agent of TB. In addition, the InhA mutants were shown to have higher dissociation constant values for NADH and lower values for the apparent first-order rate constant for INH inactivation as compared to wild-type InhA. Here, in trying to identify structural changes between wild-type and INH-resistant InhA enzymes, we have solved the crystal structures of wild-type and of S94A, I47T and I21V InhA proteins in complex with NADH to resolutions of, respectively, 2.3 angstrom, 2.2 angstrom, 2.0 angstrom, and 1.9 angstrom. The more prominent structural differences are located in, and appear to indirectly affect, the dinucleotide binding loop structure. Moreover, studies on pre-steady-state kinetics of NADH binding have been carried out. The results showed that the limiting rate constant values for NADH dissociation from the InhA-NADH binary complexes (k(off)) were eleven, five, and tenfold higher for, respectively, I21V, I47T and S94A INH-resistant mutants of InhA as compared to INH-sensitive wildtype InhA. Accordingly, these results are proposed to be able to account for the reduction in affinity for NADH for the INH-resistant InhA enzymes. (c) 2006 Elsevier Ltd. All rights reserved.