Uso de sombras na correção do efeito vinhete

When registering spectral radiance from surface targets, digital numbers recorded by the imagery sensor may vary. Such variation causes imperfections on the images coming from aerial surveys. Variation in the image brightness related to the distance from the center of the image is known as the vignetting effect. Correcting this effect aims at achieving an homogeneous image brightness. The purpose of this paper is to present a specific methodology to determine a model in order to minimize this vignette effect based on a model fit by Least Squares Method (LSM), using digital numbers (DN) from shadowed regions. The main hypothesis is that the recorded DN of shadow pixels should be suitable to model the vignetting effect. Considering that the vignetting effect could be modeled as a trend of spatial image variation, a trend surface analysis of a sample of pixels from shadowed regions was carried out. Two approaches were adopted to represent the shadow regions of an image. The first one takes into account the components R, G, B of the aerial image within the visible spectral band, and the second one considers the component I of the HSI image. In order to evaluate the methodology, a study case with a color aerial image was carried out. The findings showed that the best results were obtained by applying the model in the RGB components, which allows to conclude that the vignetting effect can be modeled based on trend surfaces fit on shadow regions DN.

Imagens hiperespectrais no monitoramento da nutrição em citros

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Medidas de deslocamento e vibrações através de imagens de câmeras digitais

Pós-graduação em Engenharia Mecânica - FEIS

Studies of azimuthal dihadron correlations in ultra-central PbPb collisions at=2.76 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The use of instantaneous phase for improving sparse arrays images

Sparse arrays have pitch larger than half-wavelength (lambda/2) and there is a reduced number of elements in comparison with a full-populated array. Consequently, there is a reduction in cost, data acquisition and processing. However, conventional beamforming techniques result in large side and grating lobes, and consequently in image artifacts. In this work the instantaneous phase of the signals is used in a beamforming technique instead of the instantaneous amplitudes to improve images obtained from sparse arrays configurations. A threshold based on a statistical analysis and the number of signals used for imaging is applied to each pixel, in order to determine if that pixel is related to a defect or not. Three sets of data are used to evaluate the technique, considering medical and non-destructive testing: a simulated point spread function, a medical phantom and an aluminum plate with 2 lambda-, 7 lambda- and lambda-pitch, respectively. The conventional amplitude image is superposed by the image improved by the instantaneous phase, increasing the reflectors detectability and reducing artifacts for all cases, as well as dead zone for the tested plate.

Comparative analysis of two techniques for detection and segmentation of moving bodies

This paper makes a comparative analysis of results produced by the application of two techniques for the detection and segmentation of bodies in motion captured in images sequence, namely: 1) technique based on the temporal average of the values of each pixel recorded in N consecutive image frames and, 2) technique based on historical values associated with pixels recorded in different frames of an image sequence.

Paralelização de algoritmos de trimap utilizando a arquitetura Cuda

Techniques of image combination, with extraction of objects to set a final scene, are very used in applications from photos montages to cinematographic productions. These techniques are called digital matting. With them is possible to decrease the cost of productions, because it is not necessary for the actor to be filmed in the location where the final scene occurs. This feature also favors its use in programs made to digital television, which demands a high quality image. Many digital matting algorithms use markings done on the images, to demarcate what is the foreground, the background and the uncertainty areas. This marking is called trimap, which is a triple map containing these three informations. The trimap is done, typically, from manual markings. In this project, methods were created that can be used in digital matting algorithms, with restriction of time and without human interaction, that is, the creation of an algorithm that generates the trimap automatically. This last one can be generated from the difference between a color of an arbitrary background and the foreground, or by using a depth map. It was also created a matting method, based on the Geodesic Matting (BAI; SAPIRO, 2009), which has an inferior processing time then the original one. Aiming to improve the performance of the applications that generates the trimap and of the algorithms that generates the alphamap (map that associates a value to the transparency of each pixel of the image), allowing its use in applications with time restrictions, it was used the CUDA architecture. Taking advantage, this way, of the computational power and the features of the GPGPU, which is massively parallel

Acurácia da mosaicagem gerada por veículo aéreo não tripulado utilizado na agricultura de precisão

The need for unmanned aerial vehicle (UAV) is a Brazilian reality in the worlds agricultural, once they have models penetrating the market with agrictural purpose. After processing, the images collected by a UAV can generate a mosaic of the study area. For making and georeferencing the mosaic, can be deployed or not ground control points. Thus, the study aimed to compare a mosaic with ground control points and without ground control points generated from images collected by a UAV used primarily for agricultural purposes. The results showed that the quality in the determination of areas and perimeters no presented significant difference with or without the use of ground control points. The mosaic generated without ground control points obtained an average error of 23.7% of the pixel size; with ground control points, the average error was 10.6%, providing an improvement of approximately 50%. Planimetric and altimetric errors, with respect to the ground control points, for the controlled mosaic, reached the order of decimeters, with planimetric accuracy of 12.8 cm, a result considered satisfactory taking into account mainly the purpose of assessed UAV

Caracterização e mapeamento da cultura da cana-de-açúcar no município de Rio Claro (SP) por meio de técnicas de sensoriamento remoto e sistemas de informações geográficas

This paper discusses about the use of remote sensing image and processing digital images tools for mapping and assessing the effect on the biomass of the culture of sugar cane in the city of Rio Claro. We used satellite images from CBERS in the passages of 19/04/2009 and 23/09/08, which correspond respectively to the stages where the sugar cane appeared in growing and adult pre-harvest stage. In these images, we applied procedures of digital processing, as the application of the procedures for extending linear contrast, radiometric normalization, Normalized Vegetation Index (NDVI) and pixel by pixel classification by ISOSEG through of the software SPRING. As a result we obtained mapping of the distribution and development stages of the culture of sugar cane in the city of Rio Claro and the mapping of the existing biomass of this culture, showing that the method used to assess the relative effect on biomass in culture of sugar cane was efficient, and that images of low-medium resolution are not the most suitable for the mapping of this culture

Estimação de densidades e aplicação em segmentação de imagens

The aim of this work is to study some of the density estimation tec- niques and to apply to the segmentation of medical images. Medical images are used to help the diagnostic of tumor diseases as well as to plan and deliver treatment. A computer image is an array of values representing colors in some scale. The smallest element of the image to which it is possible to assign a value is called pixel. Segmen- tation is the process of dividing the image in portions through the classi¯cation of each pixel. The simplest way of classi¯cation is by thresholding, given the number of portions and the threshold values. Another method is constructing a histogram of the pixel values and assign a portion to each pike. The threshold is the mean between two pikes. As the histogram does not form a smooth curve it is di±cult to discern between true pikes and random variation. Density estimation methods allow the estimation of a smooth curve. Image data can be considered as mixture of different densities. In this project parametric and nonparametric methods for density estimation will be addressed and some of them are applied to CT image data

Localização automática de pontos de controle em imagens aéreas baseada em cenas terrestres verticais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inserção e extração de marca d'água em imagens digitais usando a transformada wavelet

Pós-graduação em Engenharia Elétrica - FEIS

Avaliação do uso de técnicas digitais para caracterização de área degradada por empréstimo de solo: máxima verossimilhança x modelo linear de mistura espectral

Pós-graduação em Engenharia Civil - FEIS

Changes in nuclear morphology and chromatin texture of basal keratinocytes in melasma

BackgroundThe pathogenesis of melasma and the role of keratinocytes in disease development and maintenance are not completely understood. Dermal abnormalities, the expression of inflammatory mediators, growth factors, epithelial expression of melanocortin and sexual hormones receptors suggest that not only melanocytes, but entire epidermal melanin unit is involved in melasma physiopathology.ObjectivesTo compare nuclear morphological features and chromatin texture between basal keratinocytes in facial melasma and adjacent normal skin.MethodsWe took facial skin biopsies (2mm melasma and adjacent normal skin) from women processed for haematoxylin and eosin. Thirty non-overlapping basal keratinocyte nuclei were segmented and descriptors of area, highest diameter, perimeter, circularity, pixel intensity, profilometric index (Ra) and fractal dimension were extracted using ImageJ software.ResultsBasal keratinocyte nuclei from facial melasma epidermis displayed larger size, irregular shape, hyperpigmentation and chromatin heterogeneity by fractal dimension than perilesional skin.ConclusionBasal keratinocytes from facial melasma display changes in nuclear form and chromatin texture, suggesting that the phenotype differences between melasma and adjacent facial skin can result from complete epidermal melanin unit alterations, not just hypertrophic melanocytes.

Locating control points in aerial images with a multi-scale approach based on terrestrial image patches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)