Distribution, composition and seasonality of aquatic birds in the Nhecolandia sub-region of South Pantanal, Brazil

Despite remarkable significance of Pantanal for the conservation of aquatic birds, the status of their populations, the spatiotemporal patterns of distribution and habitat use and structure of communities are little known. Thus, we studied three aquatic environments (Negro river, bays and salines) from 2007 to 2009 in the Nhecolandia Pantanal to verify the distribution and composition of aquatic birds and also if there is significant seasonal influence on these aspects. We adopted the transect method (288 hours of sampling) and recorded 135 species (7.834 individuals). The Negro river showed the highest diversity, while the salines the lowest. The similarity of aquatic bird communities was higher between bays and salines, followed by Negro river and bays and lower between salines and Negro river. The equidistribution is more variable in the salines and more stable in the Negro river. The environments strongly differ from each other in aquatic bird composition in space (habitat use and distribution) and time (seasonal water fluctuations). The diversity of bird community in the dry season varies significantly in the salines, followed by the bays and more stable in the Negro river. The Negro river, regardless of large annual amplitude of flow, is more seasonally stable since its riparian vegetation is continuous (not isolated) and constant. These aspects provide better conditions to stay all year, contributing to decrease the seasonal nomadic tendencies of aquatic birds. Finally, all these data provide strong arguments to the preservation of all phytophysiognomies in the Nhecolandia sub-region of Pantanal, but with special attention to the salines widely used by many flocks of aquatic birds (mainly in the dry season) and migrant and/or rare species restricted to this habitat.

Implementing new northernmost records to modelling the distribution of Hypsiboas caingua (Anura: Hylidae) in South America

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mechanochemical synthesis of CaTiO3 from CaCO3 - TiO2 mixture

The synthesis of calcium titanate, CaTiO3, was performed by mechanical activation and thermal treatment. Milling for up to 360 minutes in a planetary ball mill mechanically activated an equimolar mixture of CaCO 3 and TiO2 powders. A small amount of mechanically activated mixtures was pressed into briquettes and calcined at 850°C for two hours. The effect of mechanical activation on the solid-state reaction was studied using X-ray powder diffraction and differential thermal analysis. The change of morphology and size of powder particles due to milling, were determined by SEM, while BET analysis was used to determine the specific surface area of the powder. The sintering process was followed by a dilatometer during thermal treatment up to 1300°C. The main conclusion of the analysis of conducted investigations is that CaTiO3 ceramics can be obtained from an activated mixture at a much lower temperature than reported in the literature owing to acceleration of the chemical reaction and sintering.

Vacuum infiltration of copper aluminate by liquid aluminium

This paper studies attained microstructures and reactive mechanisms involved in vacuum infiltration of copper aluminate preforms with liquid aluminium. At high temperatures, under vacuum, the inherent alumina film enveloping the metal is overcome, and aluminium is expected to reduce copper aluminate, rendering alumina and copper. Under this approach, copper aluminate toils as a controlled infiltration path for aluminium, resulting in reactive wetting and infiltration of the preforms. Ceramic preforms containing a mixture of Al2O3 and CuAl2O4 were infiltrated with aluminium under distinct vacuum levels and temperatures, and the resulting reaction and infiltration behaviour is discussed. Copper aluminates stability ranges depend on vacuum level and oxygen partial pressure, which determine both CuAl2O4 and CuAlO2 ability for liquid aluminium infiltration. At 1100 °C and 0.76 atm vacuum level CuAl2O4 is stable, indicating pO2 above 0.11 atm. Reactive infiltration is achieved via reaction between aluminium and CuAl2O4; however, fast formation of an alumina film blocking liquid aluminium wicking results in incipient infiltration. At 1000 °C and 3.8 × 10−7 atm vacuum level, CuAlO2 decomposes to Cu and Al2O3 indicating a pO2 below 6.0 × 10−7 atm; infiltration of the ceramic is hindered by the non-wetting behaviour of the resulting metal alloy. At 1000 °C and 1.9 × 10−6 atm vacuum level CuAlO2 is stable, indicating pO2 above 6.0 × 10−7 atm. Extensive infiltration is achieved via redox reaction between aluminium and CuAlO2, rendering a microstructure characterised by uniform distribution of alumina particles amid an aluminium matrix. This work evidences that liquid aluminium infiltration upon copper aluminate-rich preforms is a feasible route to produce Al–matrix alumina-reinforced composites. The associated reduction reaction renders alumina, as fine particulate composite reinforcements, and copper, which dissolves in liquid aluminium contributing as a matrix strengthener.

Increasing the lateral line length of drip irrigation systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)