93 resultados para maintaining and augmenting Plant design


Relevância:

100.00% 100.00%

Publicador:

Resumo:

In maize (Zea mays L.), the inadequate nitrogen supply and planting density are considered limiting factors to the grain yield. The objective of this study was to evaluate the influence of different nitrogen levels and plant densities to the maize yield components and productivity. The experiment was carried out in the Cerrado region, located in the southern of the Maranhao State, Brazil, in a clay Oxisol (Ustox), cropped under the no-tillage system for six years. The randomized completed blocks experimental design with four replications was used, with treatments arrangement in a 5 x 4 factorial. The treatments were a combination of five doses of nitrogen as urea (0, 50, 100, 150 and 200 kg ha(-1)) and four plant densities (25,000; 50,000; 75,000 and 100,000 plants he). The grain number and mass per spike and grain mass per plant were improved by increased N and decreased plant density. Higher incomes of grains were obtained with adding concomitantly in N doses and in plants density. The maximum grain yield (11,9 Mg ha(-1)) was obtained with 120 kg ha(-1) of N and 83,000 plants ha(-1).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Given the importance of heart, especially among the high brassica consumption, coupled with the scarcity of studies that report symptoms of nutritional disorders in the culture, the work was carried out to evaluate the effect of the omission of macronutrients in the development and nutritional status of cabbage, and describe visual symptoms of nutritional deficiency. The experiment was conducted under greenhouse conditions in the UNESP, Jaboticabal, SP. The experiment was arranged in completely randomized design with three replications and seven treatments, corresponding to complete nutritive solution (macro and micronutrients) and individual N, P, K, Ca, Mg and S omission. Plant height, number of leaves, leaf area, shoot, root and whole plant dry mass and macronutrient levels were determined and nutritional deficiency symptoms were described. Individual omissions of N, P, K or Ca were limiting for cabbage growth, considerably reducing plant height, number of leaves, and shoot, root and whole plant dry mass. Nutritional deficiency symptoms were observed for each element. Shoot macronutrient levels in control and nutrient omission treatments were, respectively: N = 31.0-11.9; P = 5.3-0.60; K = 63.5-4.8; Ca = 25.9-4.8; Mg = 5.2-0.5; S = 10.3-1.4 g kg(-1).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Silicon is a beneficial element that can increase the yield of sugarcane, especially when associated with nitrogen. The aim of this study was to evaluate the effects of silicate slag as a source of Si and its interaction with soil N on nutrition and dry matter production of sugar cane. The treatments consisted of two sources of correctives (limestone and silicate slag) in three doses (one half, once and twice the dose shown to increase V to 60%), two N rates (300 e 600mg.dm(-3)) administered as urea, a control (without corrective and without N), arranged in a completely randomized factorial design 2x3x2+1, with four replicates. Each experimental unit was constituted by a 40dm(3) pot filled with an Oxisol (V= 10% and Si= 10.3mg.dm(-3)), and 4 seedlings (SP79-1011). The nutritional status (Si and N) was evaluated 10 months after planting the sugarcane, as well as the Si content of the soil and shoot dry matter The application of silicate slag increased the content of available Si in soil and the plant. The application of corrective materials improved the nutrition and dry matter production of sugarcane. Nitrogen fertilization was not significant for dry matter production of the sugarcane-plant, regardless of the source of corrective material.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective was to study the effects of phosphorous (P) fertilization on nutritional and developmental aspects of growing mango plants. The mango plants were evaluated by soil chemical analyses, leaf chemical analyses, biological examination of plant growth, and the starting point of fruit production. Having this in view, an experiment was set up on 2 January 2003, at Flora, a farm in Uberlandia, state of Minas Gerais, Brazil. The soil was a clayish Oxisol. The doses at planting were: D0 = zero, D1 = 40, D2 = 100, D3 = 200, and D4 = 300 g of P2O5 plant-1. These doses at the beginning of the second year were multiplied by 1.5 and at the beginning of the third year by 2.0 and applied to the plants. The fertilizer used in this experiment was triple superphosphate (44% of P2O5.). During August of 2004, 2005, and 2006, soil samples were taken at a depth of 20 cm in between the plant rows. Leaf samples were taken during August of 2004 and 2005 to determine macro- and micronutrient contents in the leaves. Plant stem diameter was measured during January of 2004 and 2005. Plant height and crown radius were measured during January of 2005 and fruit production in 2005 and 2006. Fertilizer applications increased the level of P in the soil but significantly influenced plant performance only after the second year. The effects of phosphorus on mango plants take place slowly leading to increments in plant stem diameter only at the third year. Fruit set was not influenced by phosphorous fertilization.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objetivando-se avaliar a produção de mudas de mamoeiro em diferentes substratos com adubações de nitrogênio em cobertura, conduziu-se um experimento em viveiro de formação de mudas no pomar da Universidade Federal de Lavras (UFLA), Minas Gerais. Foram testadas cinco doses de nitrogênio 0; 400; 800; 1600 e 3200 mg de N dm-3 de substrato, aplicados cinco vezes, sendo que em cada aplicação foram adicionados aos sacos de polietileno (capacidade de 500 mL) 20 mL de solução contendo o N e duas composições de substratos: A (composto orgânico + areia + solo na proporção de 1:1:3 em volume) e B (Plantmax® + areia + solo na proporção de 1:1:3 em volume). Foi utilizado o delineamento experimental em blocos ao acaso em esquema fatorial 5 x 2, com 4 repetições e cinco plantas por parcela. Após 150 dias da semeadura avaliaram-se as seguintes variáveis: comprimento da parte aérea (cm); comprimento de raiz (cm), número de folha/muda, matéria seca da parte aérea, da raiz e total (g/planta). Verificou-se que dosagem de até 1.800 mg de N dm-3 em cobertura, foram as que proporcionaram melhor qualidade na formação das mudas. em relação aos substratos verificou-se que o substrato B (Plantmax® + areia + solo na proporção de 1:1:3 em volume) foi o que promoveu os melhores resultados na produção das mudas do mamoeiro 'Formosa'.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The experiment was conducted at UNESP/FCAV, Jaboticabal, SP, with the objective of evaluating the influence of the rest period and height of the residue post-grazing on the dry matter mass, morphologic composition and on the chemical composition of the Tanzania-grass pre-grazing condition, under rotational grazing. The treatments consisted of the combination of two rest periods (25 and 35 days) and two residue height post-grazing (30 and 50 cm), as a complete randomized design in factorial arrangement 2 x 2, with three replications, with the grazing cycles considered as sub plots. The herbage mass of stem, leaves, dead material and the leaf: stem ratio were significantly influenced (P<0.05) by the grazing cycles. The percentage of CP in the leaf and stem and the NDF in the stem, leaf and whole plant were influenced positively (P<0.05) by the grazing cycles. It was observed that the short rest periods associated with the smallest residue height post-grazing presented the best results in terms of herbage mass and chemical characteristics of the herbage.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este projeto objetivou relacionar a eficiência de controle de herbicidas inibidores da ACCase aplicados em pós-emergência em plantas de Digitaria horizontalis submetidas a diferentes teores de água no solo. Os experimentos foram conduzidos em casa de vegetação, com a aplicação de três diferentes herbicidas (fluazifop-p-butil, haloxyfop-methyl e sethoxydim + óleo mineral Assist). O delineamento experimental utilizado para cada herbicida foi inteiramente casualizado, com quatro repetições, constituído de um fatorial 3 x 4, sendo a combinação de três manejos hídricos (-0,03, 0,07 e -1,5 MPa) e quatro doses desses produtos (100, 50, 25 e 0% da dose recomendada). A aplicação dos herbicidas foi feita em dois estádios vegetativos: 4-6 folhas e 2-3 perfilhos. As avaliações visuais de fitotoxicidade foram realizadas aos 14 dias após a aplicação e avaliou-se a matéria seca das plantas ao final do estudo. A eficiência de controle não foi influenciada pelos manejos hídricos quando se aplicou a dose recomendada de todos os herbicidas na fase inicial de desenvolvimento das plantas (estádio de 4-6 folhas). em aplicações tardias (estádio de 2-3 perfilhos), as plantas mantidas sob estresse hídrico apresentaram menor fitotoxicidade.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O procedimento de uniformização e elevação do teor de água das sementes é recomendável para se obter resultados uniformes e confiáveis, em testes para a qualidade fisiológica de sementes, como o envelhecimento acelerado e a deterioração controlada. O trabalho teve como objetivo avaliar a qualidade fisiológica de sementes de milho, após a hidratação sob diferentes métodos e temperaturas, visando à elevação do teor de água para 15; 20 e 25%. Empregou-se o delineamento inteiramente casualizado, em esquema fatorial 4 x 2, com quatro repetições. Os tratamentos foram constituídos de quatro métodos de hidratação (substrato úmido, atmosfera úmida, imersão em água e adição da quantidade de água requerida) sob duas temperaturas (20 e 30 °C). Após a hidratação, as sementes foram submetidas às seguintes determinações: teor de água, condutividade elétrica, porcentagens de germinação e de plântulas normais na primeira contagem do teste de germinação, massas secas das porções aérea, radicular e total das plântulas obtidas na primeira contagem. O método da atmosfera úmida proporciona redução da qualidade fisiológica das sementes de milho nos três teores de água. A temperatura de 30 °C e o método da imersão direta em água não alteram a qualidade fisiológica das sementes de milho, mostrando-se adequados para a hidratação visando à elevação do teor de água para 15; 20 e 25%.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Com o objetivo de avaliar a eficácia do metribuzin (480 g i.a. ha-1) associado à palha de milheto no controle de Ipomoea grandifolia e Sida rhombifolia, foram realizados dois experimentos em casa de vegetação. No primeiro, os tratamentos constituíram-se de diferentes posicionamentos do herbicida, aplicado sobre e sob a palha em diferentes condições de umidade. No segundo, foram estudados diferentes períodos de permanência (0, 7, 14 e 21 dias) do herbicida sobre a palha de milheto antes da ocorrência da primeira chuva. Após o preenchimento dos vasos com solo, as plantas daninhas (I. grandifolia e S. rhombifolia) foram semeadas superficialmente e, em seguida, cobertas com palha de milheto (8 t ha-1). O delineamento experimental utilizado em ambos os experimentos foi o inteiramente casualizado, com quatro repetições. Foram realizadas avaliações visuais de controle (0 a 100%), contagem das plantas daninhas aos 7, 14, 21, 28 e 35 dias após a aplicação (DAA) e biomassa seca ao final. Verificou-se controle excelente das duas espécies nos diferentes posicionamentos do herbicida, exceto para I. grandifolia na condição de aplicação em palha úmida, seguido de período seco. Observou-se, ainda, que o herbicida promoveu controle eficaz em pós-emergência e em pré-emergência, mesmo sem ocorrência de chuva após a aplicação. No segundo experimento, constatou-se controle excelente (>96%) de I. grandifolia nos os períodos sem chuva de até 7 DAA; nos demais períodos, tal controle foi insatisfatório. Para S. rhombifolia, observou-se controle excelente para os períodos até 14 dias sem ocorrência de chuvas. Para o período de 28 dias, não se obteve controle satisfatório.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work aims to evaluate the effects of a simulated drift of glyphosate at different doses on some physiological characteristics of Eucalyptus grandis. A completely randomized design with five replications was used, where each pot contained an eucalyptus plant and was considered as one repetition. The plants received doses of glyphosate corresponding to 0, 30, 60, 90 and 120g.ha(-1), in the Scout (R) commercial formulation: The application was performed in three forms: leaves, stem and whole plant (leaf + stem). For foliar application, the stem was covered with plastic tape to avoid being hit by the solution, and leaves with a plastic bag when the stem was spayed. The application was performed by means of a steady spray gun equipped with four XR 11002 tips, with a pressure of 200Kpa and a volume of 2001 ha(-1). Stomatal conductance, transpiration and leaf temperature were measured at 7 days after application (DAA). The eucalypt plants receiving applications in leaves and whole plant showed, at the highest glyphosate dosis (120g.ha(-1)), a transpiration reduced by 22% and an 18% increase of stomatal resistance at 7 DAA. The lowest dose (30g-ha(-1)) applied to the whole plant caused a transpiration stimulation of 18%, and a leaf to air difference in temperature of -1.66 degrees C, while the difference between the highest and lowest dose used was 3.5 degrees C.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)