Equações alométricas em plantios mistos visando à restauração da floresta estacional semidecidual

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contração de polimerização e expansão higroscópica de resinas compostas: análise pela técnica de video-imagem

To evaluate the volumetric changes due to polymerization and thermocycling on different resin-composites. Methods: Thirteen A2 Universal Dentin shade resin-composites (n = 10) from eight manufacturers were evaluated (4Seasons, Grandio, Venus, Amelogen Plus, P90, Z350, Esthet-X, Amaris, Vita-l-escence, Natural-Look, Charisma, Z250 and Opallis). The polymerization shrinkage percentage (PS) was calculated using an image measurement device (ACUVOL - Bisco Dental). Equal volumes of material, standardized by a semisphere polyurethane matrix (d = 3mm) were used and, after 5 minutes of relaxation, the baseline volume measurements were obtained with 18 J of energy dose from the LED light-curing unit. Measurements were obtained after 5 minutes and PS values calculated. Specimens were stored in a drydark environment for 24 hours and re-measured. Specimens were then thermocycled in distilled water between 5oC and 55oC for 20,000 cycles, subjected to another volume measurement at 5,000 cycle intervals. Specimens were gently dried prior to each measurement. Results: Repeated measurements were made using ANOVA (α = 0.05) showed that all resin-composite volumes were influenced by the number of cycles. Volumes at 5 minutes post-polymerization (12.47 ± 0.08) were significantly lower than those at baseline (12.80 ± 0.09). Volumes at 24 hours (12.43 ± 0.19) were insignificantly lower than those at 5 minutes postpolymerization. With regards to the impact of thermocycling, all specimens showed statistically significant increases in volume after 5,000 cycles (13.04 ± 0.22). Although statistically different from those after 5,000 cycles, there was no statistically significant difference between volumes measured at 10,000 (12.87±0.21), 15,000 (12.92±0.24), and 20,000 (12.84±0.23) cycles. Conclusion: According to the video-imaging analysis, thermocycling caused a significant expansion in resin-composites tested, the volume increase was not able to...

Variação da distribuição do diâmetro eritrocitário e do volume corpuscular médio em cães anêmicos

The anisocytosis is a hematologic finding that is routinely evaluated from the mean corpuscular volume (MCV) and erythrocyte morphology in assessment of blood smears. The present study tested the hypothesis that the coefficient of variation of the red cell distribution width (RDW-CV - Red Cell Distribution Width) is a more sensitive parameter in the evaluation of hematologic anisocytosis, considering different levels of anemia in dogs and reticulocytosis. Blood counts of 102 anemic dogs and 353 control dogs made by automated hematology counter. The anemic animals were grouped according to the degree of anemia (mild, moderate and severe) and also as medullary response by manual reticulocyte count (none, weak, moderate and strong). The RDW-CV was different to the animal groups with moderate and severe anemia, which were higher, compared to the control group and mild anemia. The highest average value of RDW-CV (14.45%) occurred in patients with severe anemia. In the control group had higher MCV value that anemic animals , this may be due to a mixed population of erythrocytes in that group of animals. However, there wasn’t difference in MCV between different degrees of anemia and reticulocytosis. Therefore, the RDW is a more sensitive indicator anisocytosis than VCM and its value is directly proportional to the degree of anemia and reticulocytosis; when combined, the sensitivity for detection of anisocytosis in anemic dogs is greater. The use of reference values established by the clinical laboratory itself is mighty important.

Supervisão da furação com foco na estimativa do diâmetro do furo

Processos automatizados, como a furação, podem melhorar com o uso de métodos de controle e supervisão, com destaque para sensores e redes neurais artificiais. Neste estudo, foram utilizados diferentes sensores instalados em máquina-ferramenta para o registro dos sinais de força de avanço, potência elétrica, aceleração e sinal acústico, durante a furação de corpos de prova compostos por uma liga de titânio seguida de uma liga de alumínio. Os sinais e os diâmetros dos furos medidos na furação das amostras foram utilizados no treinamento da rede neural artificial. Os erros foram apresentados e analisados. Os resultados demonstraram alta capacidade da rede em estimar o diâmetro do furo nas diferentes condições de usinagem com erros baixos e até mesmo desprezíveis para a maior parte das aplicações industriais, mostrando assim eficiência do método proposto.

Diâmetro folicular e taxa de prenhez em protocolo de sincronização com GnRH ou Benzoato de Estradiol no dia 0 em vacas de corte

This work aimed to evaluate the pregnancy rate and follicular diameter using EB or GnRH on the insertion of progesterone implant (D0) in lactating beef cows. Two groups were tested in two experiments. In Exp. 1 were used 61 Nelore cows divided into two groups: G-BE (n = 32) and G-GnRH (n = 29), on D0 was inserted P4 implant (CIDR ) and applied 2 mL of BE (G-BE) or 2.5 mL GnRH (G-GnRH). In D9 was performed ultrasonography (U.S.) to measure the diameter of the dominant follicle (DF) present in the ovary and the implant was removed, with concomitant administration of 2.5 mL of PGF2a and estradiol cypionate (ECP ) followed by calves removal. After 48 hours all the cows were inseminated and the calves returned. In Exp. 2 50 cows were used following the same protocol described above, but the pregnancy was assessed without performing ovarian US. There was no difference (p>0.05) in pregnancy rate between treatments, BE (55%) or GnRH (41%), but the follicular diameter was significantly higher (p<0.05) in pregnant cows treated with EB (10.7 mm vs. 8.5 mm) and in cows treated with GnRH there was no difference (p>0.05) between pregnant and no pregnant cows (11.6 mm vs. 10.2 mm). We concluded the use of GnRH on D0 did not improve the pregnancy rate in lactating beef cows and follicular diameter was greater (p <0.05) in pregnant cows compared to non-pregnant only in G-BE.

Aplicação da teoria da confiabilidade em estacas escavadas de grande diâmetro para obtenção das superfícies resistentes de projeto

In this work, the author looks forward to develop a new method capable of incorporate the concepts of the Reliability Theory and Ruin Probability in Deep Foundations, in order to do a better quantification of the uncertainties, which is intrinsic in all geotechnical projects, meanly because we don't know all the properties of the materials that we work with. Using the methodologies of Decourt Quaresma and David Cabral, resistance surfaces have been developed utilizing the data achieved from the Standard Penetration Tests performed in the field of study, in conjecture with the loads defined in the executive project of the piles. The construction of resistance surfaces shows to be a very useful tool for decision making, no matter in which phase it is current on, projecting or execution. The surfaces were developed by Kriging (using the software Surfer® 12), making it easier to visualize the geotechnical profile of the field of study. Comparing the results, the conclusion was that a high safety factor doesn't mean higher security. It is fundamental to consider the loads and resistance of the piles in the whole field, carefully choosing the project methodology responsible to define the diameter and length of the piles