Energy balance optimization of sugarcane crop residual biomass

This work presents a mathematical model for helping mills choose sugarcane varieties for planting. It maximizes crop residual biomass energy balance by considering the difference between generated and consumed energy in the process of transferring this biomass from the field to the processing center; it takes into account enterprise demand restrictions and cane planting area. For this full zero-one linear programming techniques were proposed. The model is viable for choosing sugarcane varieties that would benefit sugarcane production and industrial systems, by reducing crop residue and increasing final energy production. (c) 2006 Published by Elsevier Ltd.

Early development and nutrition of cover crop species as affected by soil compaction

A good cover crop should have a vigorous early development and a high potential for nutrient uptake that can be made available to the next crop. In tropical areas with relatively dry winters drought tolerance is also very important. An experiment was conducted to evaluate the early development and nutrition of six species used as cover crops as affected by sub-superficial compaction of the soil. The plants (oats, pigeon pea, pearl millet, black mucuna, grain sorghum, and blue lupin) were grown in pots filled with soil subjected to different subsurface compaction levels (bulk densities of 1.12, 1.16, and 1.60 mg m(-3)) for 39 days. The pots had an internal diameter of 10 cm and were 33.5 cm deep. Grasses were more sensitive to soil compaction than leguminous plants during the initial development. Irrespective of compaction rates, pearl millet and grain sorghum were more efficient in recycling nutrients. These two species proved to be more appropriate as cover crops in tropical regions with dry winters, especially if planted shortly before spring.

Dynamics of aggregate stability influenced by soil management and crop residues

The type of tillage and crop systems used can either degrade or cause a recovery of the structure of agricultural soils. The objective of this study was to determine the structural stability of the soil using mean weight diameter (MWD) of soil aggregates in three different periods of a succession of crops consisting of beans/cover plants/maize under no tillage (NT) and conventional tillage (CT) management systems. Soils were sampled at 0- to 5-cm and 5- to 15-cm depths in three periods (P1, P2, P3): 1) November 2002 (spring/summer), 2) April 2003 (beginning of autumn), and 3) December 2003 (end of spring/beginning of summer). Aggregate stability was determined by wet sieving. The effects of the tillage systems, vegetal residues, and sampling depths on the structural stability of the aggregates were assessed and then related to organic matter (OM) contents. Aggregate stability showed temporal variation as a function of OM contents and sampling period. No tillage led to high MWD values in all study periods. The lowest MWD values and OM contents were observed 4 months after the management of the residues of cover plants. This finding is consistent with the fact that at the time of the samplings, most of the OM had already mineralized. The residues of sunn-hemp, millet, and spontaneous vegetation showed similar effects on soil aggregate stability.

Leaching of nitrate and ammonium from cover crop straws as affected by rainfall

Nitrogen (N) mineralization dynamics in no-till systems is affected, among other factors, by N amount and quality in the mulch and by climatic conditions. Leaching of NO3-N and NH4-N from six plant species used as soil cover crops in tropical environments were evaluated when the straw was submitted to rainfall after chemical desiccation. Millet (Pennisetum glaucum), guinea sorghum (Sorghum vulgare), black oat (Avena strigosa), triticale (Triticum secale), Indian hemp (Crotalaria juncea), and brachiaria (Brachiaria decumbens) were grown in a greenhouse, in Botucatu-SP, Brazil. Forty-five days after emergence, the plants were cut at the root collar, oven-dried, and submitted to simulated rainfalls of 4.4, 8.7, 17.04, 34.9, and 69.8 mm, considering an amount of straw equivalent to 8 t ha(-1) of dry matter. The amounts of N-NO3- extracted from the straw by rainwater were very small. However, accumulated rainfall around 70 mm caused ammonium leaching ranging from 2.5 to 9.5kg ha(-1), depending on the species. Plant residues of triticale and black oat (grasses) and Indian hemp (legume) showed high N leaching intensity with the first rains after chemical desiccation. The amount of N leached from straw was highly correlated with N tissue content.

Determination of carbamate residues in crop samples by cholinesterase-based biosensors and chromatographic techniques

An amperometric biosensor based on cholinesterase (ChE) has been used for the determination of selected carbamate insecticides in vegetable samples. The linear range of the biosensor for the N-methylcarbamates (aldicarb, carbaryl, carbofuran, methomyl and propoxur) varied from 5 x 10(-5) to 50 mg kg(-1). Limits of detection were calculated on the basis that the ChE enzymes were 10% inhibited and varied, depending of the combination ChE (as acetyl- or butyrylcholinesterase) vs. inhibitor (pesticide), from 1 x 10(-4) to 3.5 mg kg(-1). The biosensor-based carbamate determination was compared to liquid chromatography/UV methods. Three vegetable samples were spiked with carbofuran and propoxur at 125 mu g kg(-1) followed by conventional procedures. Good correlations were observed for carbofuran in the vegetable extracts (79, 96 and 91% recoveries for potato, carrot and sweet pepper, respectively), whereas for propoxur unsatisfactory results were obtained. Potato and carrot samples were spiked with 10, 50 and 125 mu g kg(-1) carbofuran, followed by direct determination by the amperometric biosensor. The fortified sampler; resulted in very high inhibition values, and recoveries were: 28, 34 and 99% for potato, and 140, 90 and 101% for carrot, respectively, at these three fortification levels. (C) 1998 Elsevier B.V. B.V.

Phenotypical characterization of Candida spp. isolated from crop of parrots (Amazona spp.)

Renata G. Vieira R.G. & Acqua Coutinho S.D. 2009. Phenotypical characterization of Candida spp. isolated from crop of parrots (Amazona spp.). Pesquisa Veterinaria Brasileira 29(6):452-456. Curso de Pos-Graduagdo em Imunopatologia Veterinaria, Universidade Paulista, Rua Agariba 48, São Paulo, SP 05053010, Brazil. E-mail: selene@uol.com.brThe purpose of this study was to characterize Candida isolates from crop of parrots. Forty baby parrots of genus Amazona, species aestiva and amazonica that were apprehended from wild animal traffic were used: 18 presented ingluvitis and 22 other alterations, but showing general debilitation. Samples were seeded on Sabouraud dextrose agar with chloramphenicol after be obtained by the introduction of urethral probe through the esophagus. Based on morphology and biochemical reactions (API 20C) Candida was confirmed; it was still searched the production of proteinase and phospholipase, virulence factors for Candida species. Candida spp. were isolated from 57.5% parrots, being 72.2% from birds with ingluvitis and 45.5% from without ones. Twenty-five strains of Candida were isolated, 60% and 40%, respectively from parrots with and without ingluvitis, and were speciated: 28% C. humicola, 24% C. parapsilosis, 20% C. guilliermondii, 20% C. famata, and 8% C. albicans. These results demonstrate that C. albicans is not the most frequent species isolated, and it is the first report that shows C. guilliermondii, C. famata, and C. humicola causing infection in parrots. Many isolates presented filamentation (76%), 100% produced proteinase and 68% phospholipase. The observation of Candida spp. producing virulence factors reinforce the pathogenic role of these yeasts in the cases studied.

The primary sources of carbon loss during the crop-establishment period in a subtropical Oxisol under contrasting tillage systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An Innovative Crop-Forage Intercrop System: Early Cycle Soybean Cultivars and Palisadegrass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of the Priestley-Taylor α parameter for a bean crop

This work deals with the Priestley-Taylor model for evapotranspiration in different grown stages of a bean crop. Priestley and Taylor derived a practical formulation for energy partitioning between the sensible and latent heat fluxes through the α parameter. Bowen ratio energy balance (BREB) was carried out for daily sensible and latent heat flux estimations in three different crop stages. Mean daily values of Priestley-Taylor α parameter were determined for eleven days during the crop cycle. Diurnal variation patterns of α are presented for the growing, flowering and graining periods. The mean values of 1.13 ± 0.33, 1.26 ± 0.74, 1.22 ± 0.55 were obtained for a day in the growing, in the flowering and for graining periods, respectively. Eleven days values of α are shown and gave a mean value of 1.23 ± 0.10 which agree on the reported literature.

Potential of Brazilian eugenia myrtaceae - As ornamental and as a fruit crop

Brazilian Myrtaceae comprises several genera of trees and shrubs used for ornamental and fruit production. In addition to the well known Guava, Pitanga and Jaboticaba, other species could be used for fruitculture, due the value and quality of their fruits and adaptation to some climate conditions mainly the subtropical one. Nine species of Eugenia were evaluated at Jaboticabal, located at 48° W and 21° S in São Paulo state in a germplasm bank. The average rain by year is 1431 mm and the temperature 22,2° C at an altitude of 575 m. The species are Eugenia klozschiana Berg. (Pero-do-campo), E. stipitata Mc Vaugh (Araça-boi), E. tomentosa Camb. (Cabeludinha), E. dysentherica DC. (Cagaita), E. brasiliensis Berg. (Grumixama), E.pitanga (Pitanga-anã), E. luchsnathiana Berg. (Pitomba), E. uvalha Camb. (Uvaia) and E. involucrata DC. (Cereja-do-rio-grande). The evaluations comprised tree development, fruit quality and leaf and flower morphological studies. The main results are: the trees of Pera-do-campo and Pitanga-anã are small shrubs of 1 to 2 m height, Araça-boi and Cabeludinha are small trees, 3 to 5 m high, and the other species are tall trees, with 5 to 10 m height. The species adapted well to the subtropical conditions, except for Araça-boi, which is native to the Amazonian region and exhibited a severe fungus disease infection. In relation to fruit quality, all the species had edible fruit, some were sweet and juicy, Cabeludinha, Grumixama, Pitomba, Cereja-do-rio grande and Pitanga-anã, while others had high acidity (Araça-boi, Pera-do-campo, Cagaita and Uvaia and were more suitable for processing. Simple, single leaves were characteristic of all species, but with different sizes and shapes., With the addition of color, smell and other characteristics, leaf size and shape were useful for comparative classification. Flower components and structure are described also.

Sugar cane (Saccharum spp.) crop residue baling for energy purposes in Brazil

The sugar cane crop according to several authors can generate, besides the industrialized stalks, an amount of crop residues from the order of 15 to 30% in weight of the aerial part of the plants, depending on the field conditions. The sugar cane area in Brazil is around 5.5×106 hectares, with an amount of 400.106 tons of stalks, with stalks yield of 72 tons.ha-1 (Unica, 2005). This study took place in a sugar cane plot (Latitude 22°46'S, Longitude 47°23'W and 600m of altitude) with 3% of slope, located in São Paulo State. The sugar cane variety was SP 80-1816, in its forth cut, 11 months old and with a planted row spacing of 1.40m. By other side, several sugar mills are bringing the crop residue to their patio to produce energy with the bagasse. One way for that is the baling operation to bring the crop residue at the sugar mill. Some fundamental variables were obtained to define the best set of machines to work with in sugar cane crop residue removal in the baling system among the studied ones, some of the variables were: Soil Index (T1 = 0.83%, T2 = 0.46%, T3 = 0.65%, T4 = 0.57%); Energy Efficiency (T1 = 82.48%, T2 = 83.88%, T3 = 82.83% and T4 = 82.97%) of the system and Effective Cost for Equivalent Energy in US$.EBP-1 (T1 = 11.10, T2= 10.46, T3 = 11.47 and T4 = 10.57) of the baled trash delivered at the sugar mill.

Morphology of oesophagus and crop of the partrigde Rhynchotus rufescens (Tiramidae)

Twenty adult partridges Rhynchotus rufescens were used to study the morphology of oesophagus and crop. Materials to the morphologic study were collected and lengths of the oesophagus and of the crop were measured. For histological study, fragments of the oesophagus and of the crop were stained routinely with Masson's trichrome stain. Total oesophagus was larger in females. In the entrance of the thorax, its ventral wall is enlarged broadly, forming the crop, which is larger in males. Oesophagus mucosa is constituted by stratified squamous epithelium, with mucous glands and lymphatic tissues. There are three layers of smooth muscle, involved in serosa. The histological structure of the crop is similar to the oesophagus. The mucous glands are reduced in size and the lymphatic tissues are dispersed in the connective tissue. There is a thin stratum of smooth muscle and other two wider layers of longitudinal and circular musculature.

Air-assistance and low volume application to control of asian rust on soybean crop

Currently, one of factors that cause the production cost increase of soybean crop is the pesticide application. The most important disease in soybean crop is Asian rust, caused by Phakopsora pachyrhizi Sydon & P. Sydon fungus, which can cause significant loss of the production. Therefore, this work aimed at evaluation of different spraying techniques on the spray deposits and some parameters of soybean crop: grain size, weight of 1 000 seeds and the crop productivity. Two experiments were carried out in the experimental area of FCA/UNESP (Faculdade de Ciencias Agronomicas/Universidade Estadual Paulista Julio de Mesquita Filho) - Botucatu, S P, Brazil, in soybean crop, Conquista variety, in the 2007/2008 season. In the first experiment, three air levels (0, 9 and 29 km/h of the air speed generated by fan) with flat fan nozzle XR 8002 with a spray volume of 130 l/ha were compared with a rotating nozzle - using low volume oily - LVO at 40 l/ha of spray volume. The second experiment was carried out under the same conditions as the previous experiment, including a control treatment (untreated plants). The disease severity was evaluated using a diagrammatic scale with a visual evaluation of the disease on 15 leaves of each plot. The grades varied between 0.6 and 78.5% of the disease severity. The use of air assistance when compared with the rotating system nozzle did not show significant differences for spray deposits on adaxial and abaxial surface of the leaves in bottom part of the plant. The air assistance with maximum air speed (29 km/h) increased the productivity with respect of the other treatments.

Identification of foliar diseases in cotton crop

The pathogens manifestation in plantations are the largest cause of damage in several cultivars, which may cause increase of prices and loss of crop quality. This paper presents a method for automatic classification of cotton diseases through feature extraction of leaf symptoms from digital images. Wavelet transform energy has been used for feature extraction while Support Vector Machine has been used for classification. Five situations have been diagnosed, namely: Healthy crop, Ramularia disease, Bacterial Blight, Ascochyta Blight, and unspecified disease. © 2012 Taylor & Francis Group.

A genetic algorithm for crop rotation

In the last few years, crop rotation has gained attention due to its economic, environmental and social importance which explains why it can be highly beneficial for farmers. This paper presents a mathematical model for the Crop Rotation Problem (CRP) that was adapted from literature for this highly complex combinatorial problem. The CRP is devised to find a vegetable planting program that takes into account green fertilization restrictions, the set-aside period, planting restrictions for neighboring lots and for crop sequencing, demand constraints, while, at the same time, maximizing the profitability of the planted area. The main aim of this study is to develop a genetic algorithm and test it in a real context. The genetic algorithm involves a constructive heuristic to build the initial population and the operators of crossover, mutation, migration and elitism. The computational experiment was performed for a medium dimension real planting area with 16 lots, considering 29 crops of 10 different botanical families and a two-year planting rotation. Results showed that the algorithm determined feasible solutions in a reasonable computational time, thus proving its efficacy for dealing with this practical application.