Esforços em ferramentas rompedoras de solo de semeadoras de plantio direto

The individual evaluation of mechanisms for opening furrows to drop the seeds in a no-tillage seeders cultivation assists the companies in the sizing of opening tools of the ground, that search for minor energy petition and for diminishing the ground area mobilized. Therefore this work had the aim of evaluate the efforts of five different mechanisms of opening of ridge of seeding of direct plantation varyng the vertical load. The experiment was installed in one ground classified as Dystroferric Red Nitosol. The used experimental delineation was of the one randomized blocks in a factorial project 5 x 4, constituted a the following factors: five mechanisms of furrow opening (even disk - DL, corrugated disk - DC, ondulated disk - DO, double disk - DD and furrow rod - F) and four vertical loads (750, 1500, 2250 and 3000 N). To measure the forces in the studied treatments a dynamometer with sensitivity in the directions was used horizontal, lateral and vertical direction. The evaluation showed that the interaction between mechanisms of opening of ridge and vertical load was not significant, however the factors were significant when analyzed individually. The connecting rod promoted mobilization of the ground with smaller draft of horizontal effort reaching depths of work. The work showed that the vertical load influenced the depth of work of the mechanisms of ridge opening. The mechanisms of ridge opening of record type need vertical force to penetrate into the ground.

Determinação do módulo de elasticidade da madeira juvenil e adulta de Pinus taeda por ultra-som

A madeira de Pinus sp. tem utilização crescente na indústria madeireira brasileira. O decréscimo constante do suprimento de árvores adultas com grandes diâmetros, provenientes de florestas naturais, tornou comum a produção de madeira em ciclos curtos, com grande proporção de madeira juvenil. Resultados de diversas pesquisas têm reportado que o módulo de elasticidade e a resistência a diferentes solicitações mecânicas são seriamente afetados pela presença de madeira juvenil. Este trabalho teve por objetivo determinar o módulo de elasticidade da madeira juvenil e adulta de Pinus taeda L. a partir da constante dinâmica C LL, obtida em ensaios não-destrutivos de ultra-som. A madeira de P. taeda era originária de plantios da Estação Experimental de Itapeva - SP, sendo amostrados seis indivíduos arbóreos com 34 anos de idade. Os corpos-de-prova (4 cm x 4 cm x 45 cm) foram obtidos separadamente das regiões de madeira juvenil e adulta da prancha central, previamente submetida à secagem industrial (umidade final de 12%), para a determinação da constante dinâmica por meio de ensaios de ultra-som. Para avaliar a sensibilidade do método do ultra-som, os corpos-de-prova foram ensaiados destrutivamente à compressão paralela. Os resultados mostraram boa sensibilidade do método do ultra-som (R² » 0,90) na avaliação desse parâmetro mecânico da madeira juvenil e adulta.

Manejo hídrico em viveiro e uso de hidrogel na sobrevivência pós-plantio de Eucalyptus urograndis em dois solos diferentes

O trabalho teve como objetivo avaliar a sobrevivência do clone H13 de Eucalyptus urograndis sob dois manejos hídricos de viveiro, plantados em dois solos, com e sem a adição de polímero hidroabsorvente (hidrogel). O plantio foi realizado em vasos mantidos em estufa, com dois tipos de solo: um arenoso e outro argiloso. Cada vaso recebeu 2,5 L de solo, um litro de água e o hidrogel na proporção de 0,4 g vaso-1 (120 mL de gel). O delineamento experimental adotado foi o inteiramente casualizado, com três repetições. Os sintomas de estresse, nos vários níveis avaliados, sempre se manifestaram primeiro nas plantas no solo argiloso, de modo mais acentuado naquelas que foram mantidas sem estresse de água na fase de viveiro. Isso garantiu que as plantas sobrevivessem por um período menor sem água, variando de 14 a 20 dias (com e sem hidrogel, respectivamente), enquanto, no solo arenoso, a sobrevivência foi maior, de 29 a 34 dias (com e sem hidrogel, respectivamente). Apesar da não significância estatística, os resultados com o hidrogel possibilitam, em ambos os solos, maior flexibilidade operacional na intervenção com novas irrigações.

Eucalyptus ESTs involved in mechanisms against plant pathogens and environmental stresses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dinâmica populacional do psilídeo-de-concha Glycaspis brimblecombei (Moore, 1964) (Hemiptera: Psyllidae) e de seu parasitóide Psyllaephagus bliteus (Hymenoptera: Encyrtidae) em floresta de Eucalyptus camaldulensis

O psilídeo-de-concha, Glycaspis brimblecombei, é uma praga exótica específica de Eucalyptus, que causa desfolha, secamento de ponteiros e ramos, podendo levar as árvores à morte. O parasitóide Psyllaephagus bliteus é indicado como principal agente no controle biológico desta praga. Portanto, o monitoramento adequado de as ambas espécies por um método eficiente de amostragem facilitaria o manejo para uma futura tomada de decisão. Devido à falta de informações referentes ao seu comportamento em plantações extensivas de eucalipto no Brasil, este trabalho teve como objetivo estudar as populações de G. brimblecombei e de P. bliteus em florestas de Eucalyptus camaldulensis, utilizando armadilhas amarelas para determinação de sua flutuação populacional e correlacionado-as com variáveis meteorológicas (temperatura e precipitação). A determinação da flutuação populacional (53 pontos amostrais) foi realizada em talhão de 19ha com E. camaldulensis em Luíz Antônio, SP, em 10avaliações quinzenais, entre janeiro e junho de 2005. As populações de ambas as espécies apresentaram correlação inversamente proporcional em função da temperatura e não há correlação com a precipitação no período avaliado.

DNA bar-coding reveals source and patterns of Thaumastocoris peregrinus invasions in South Africa and South America

Thaumastocoris peregrinus is a recently introduced invertebrate pest of non-native Eucalyptus plantations in the Southern Hemisphere. It was first reported from South Africa in 2003 and in Argentina in 2005. Since then, populations have grown explosively and it has attained an almost ubiquitous distribution over several regions in South Africa on 26 Eucalyptus species. Here we address three key questions regarding this invasion, namely whether only one species has been introduced, whether there were single or multiple introductions into South Africa and South America and what the source of the introduction might have been. To answer these questions, bar-coding using mitochondrial DNA (COI) sequence diversity was used to characterise the populations of this insect from Australia, Argentina, Brazil, South Africa and Uruguay. Analyses revealed three cryptic species in Australia, of which only T. peregrinus is represented in South Africa and South America. Thaumastocoris peregrinus populations contained eight haplotypes, with a pairwise nucleotide distance of 0.2-0.9% from seventeen locations in Australia. Three of these haplotypes are shared with populations in South America and South Africa, but the latter regions do not share haplotypes. These data, together with the current distribution of the haplotypes and the known direction of original spread in these regions, suggest that at least three distinct introductions of the insect occurred in South Africa and South America before 2005. The two most common haplotypes in Sydney, one of which was also found in Brisbane, are shared with the non-native regions. Sydney populations of T. peregrinus, which have regularly reached outbreak levels in recent years, might thus have served as source of these three distinct introductions into other regions of the Southern Hemisphere.

Can Eucalyptus invade native forest fragments close to commercial stands?

Some Eucalyptus species are widely used as a plantation crop in tropical and subtropical regions. One reason for this is the diversity of end uses, but the main reason is the high level of wood production obtained from commercial plantings. With the advancement of biotechnology it will be possible to expand the geographical area in which eucalypts can be used as commercial plantation crops, especially in regions with current climatic restrictions. Despite the popularity of eucalypts and their increasing range, questions still exist, in both traditional planting areas and in the new regions: Can eucalypts invade areas of native vegetation, causing damage to natural ecosystems biodiversity?The objective of this study it was to assess whether eucalypts can invade native vegetation fragments in proximity to commercial stands, and what factors promote this invasive growth. Thus, three experiments were established in forest fragments located in three different regions of Brazil. Each experiment was composed of 40 plots (1 m(2) each one), 20 plots located at the border between the forest fragment and eucalypts plantation, and 20 plots in the interior of the forest fragments. In each experimental site, the plots were paired by two soil exposure conditions, 10 plots in natural conditions and 10 plots with soil exposure (no plant and no litter). During the rainy season, 2 g of eucalypts seeds were sown in each plot, including Eucalyptus grandis or a hybrid of E. urophylla x E. grandis, the most common commercial eucalypt species planted in the three region. At 15, 30, 45, 90, 180, 270 and 360 days after sowing, we assessed the number of seedlings of eucalypts and the number of seedlings of native species resulting from natural regeneration. Fifteen days after sowing, the greatest number of eucalypts seedlings (37 m(-2)) was observed in the plots with lower luminosity and exposed soil. Also, for native species, it was observed that exposed soil improved natural germination reaching the highest number of 163 seedlings per square meter. Site and soil exposure were the factors that have the greatest influence on seed germination of both eucalypt and native species. However, 270 days after sowing, eucalypt seedlings were not observed at any of the three experimental sites. The result shows the inability of eucalypts to adapt to condition outside of their natural range. However, native species demonstrated their strong capacity for natural regeneration in forest fragments under the same conditions where eucalypts were seeded. (C) 2011 Elsevier B.V. All rights reserved.

Caracterização da Estrutura Espacial do Psilídeo-de-concha Glycaspis brimblecombei (Hemiptera: Psyllidae) e de seu Parasitóide Psyllaephagus bliteus (Hymenoptera: Encyrtidae) em Floresta de Eucalyptus camaldulensis

Os psilídeos são um grupo de pragas amplamente distribuídas, causando perdas consideráveis em sistemas agrícolas e florestais. A recente descoberta da ocorrência do psilídeo-de-concha Glycaspis brimblecombei Moore (Hemiptera: Psyllidae), no Brasil tornou-se um problema de grande importância, por ser específico de Eucalyptus. O parasitóide Psyllaephagus bliteus Riek (Hymenoptera: Encyrtidae) é indicado como principal agente no controle biológico desta praga. Portanto, para o monitoramento adequado de ambas espécies é necessário um método eficiente de amostragem. Devido a falta de informações referentes ao seu comportamento em plantações extensivas de eucalipto, realizou-se este trabalho, para verificar a distribuição espacial de G. brimblecombei e de seu parasitóide P. bliteus, através de armadilhas adesivas em floresta de E. camaldulensis. Para determinação da distribuição espacial foram utilizadas 53 armadilhas amarelas distribuídas uniformemente no talhão, formando uma grade amostral espaçadas de 50 x 36 m, à altura aproximada de 1,80 m do solo. Cada armadilha foi presa com auxílio de um arame plastificado em um fio estendido entre duas árvores em um talhão de 19 ha com E. camaldulensis em Luiz Antônio, SP. Foram realizadas dez avaliações, entre janeiro e junho de 2005. Após a coleta as armadilhas foram levadas ao laboratório para ser feita à triagem e contagem do número total de adultos de G. brimblecombei e de P. bliteus, nas duas faces das armadilhas. Concluiu-se que as populações de ambas espécies apresentaram distribuição espacial agregada, no período avaliado.

Cultivo de bananas em diferentes áreas na ilha de Tenerife

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seletividade do herbicida saflufenacil a Eucalyptus urograndis

As áreas com plantios florestais estão constantemente em expansão, e a interferência das plantas daninhas alteram o crescimento e desenvolvimento de plantas de eucalipto, pois estas competem por água, nutrientes, espaço e luz. Objetivou-se com este estudo avaliar a seletividade do herbicida saflufenacil, aplicado com e sem óleo mineral Dash, em plantas de Eucalyptus urograndis, em diferentes locais de aplicação (planta, solo e solo + planta). O delineamento experimental adotado foi o inteiramente casualizado, com quatro repetições, constituído de um fatorial 3 x 11, sendo três locais de aplicação do herbicida na planta e 11doses do herbicida saflufenacil combinadas ou não com o adjuvante Dash. Cada parcela constou de um vaso com uma planta. Os tratamentos usados foram: 0, 25, 25+Dash (0,5% v/v), 50, 50+Dash (0,5% v/v), 75, 100, 125, 150, 175 e 200 g i.a. ha-1 . Foram realizadas avaliações visuais de fitointoxicação durante 56 dias após aplicação (DAA). Avaliouse, ainda, a altura, o diâmetro de caule e a biomassa seca das plantas. Todas as doses testadas de saflufenacil sem adjuvante mostraram-se seletivas às plantas de E. urograndis, independentemente do local de aplicação. A adição de Dash aos tratamentos proporcionou injúrias severas às plantas nas avaliações iniciais, quando aplicado sobre as plantas, com a recuperação total destas no fim do ensaio, aos 56 DAA. A aplicação do herbicida em mistura com adjuvante somente no solo não causou intoxicação às plantas de eucalipto.

Mamíferos de médio e grande porte e sua relação com o mosaico de habitats na cuesta de Botucatu, Estado de São Paulo, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The benefits of ethanol use for hydrogen production in urban transportation

The purpose of this paper is to describe the benefits of sugar cane ethanol in Brazil, appointing the productivity of this type of fuel based on hectares of plantation, its carbon dioxide cycle and the contribution to reduce the greenhouse effect. In the following step the uses of ethanol for hydrogen production by steam reforming is analyzed and some comparison with natural gas steam reforming is performed. The sugar cane industry in Brazil, in a near future, in the hydrogen era, could be modified according to our purpose, since besides the production of sugar, and ethylic and anhydric alcohol, Brazilian sugar cane industry will also be able to produce biohydrogen.Fuel cells appear like a promising technology for energy generation. Among several technologies in the present, the PEMFC (proton exchange membrane fuel cell) is the most appropriate for vehicles application, because it combines durability, high power density, high efficiency, good response and it works at relatively low temperatures. Besides that it is easy to turn it on and off and it is able to support present vibration in vehicles. A PEMFC's problem is the need of noble catalysts like platinum. Another problem is that CO needs to be in low concentration, requiring a more clean hydrogen to avoid fuel cell deterioration.One part of this paper was developed in Stockholm, where there are some buses within the CUTE (clean urban transport for Europe) project that has been in operation with FC since January 2004. Another part was developed in Guaratingueta, Brazil. Brazil intends to start up a program of FC buses. As conclusion, this paper shows the economical analysis comparing buses moved by fuel cells using hydrogen by different kinds of production. Electrolyze with wind turbine, natural gas steam reforming and ethanol steam reforming. (C) 2009 Elsevier Ltd. All rights reserved.

Distribuição espacial de Tenuipalpus heveae Baker (Acari: Tenuipalpidae) na cultura da seringueira

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade de madeira do eucalipto correlacionada com atributos do solo visando ao mapeamento de zonas específicas de manejo

The perfect spatial intervention to manage the cultivation of the land, deriving from specific regions of the soil mapping, increases the agricultural productivity, as well as its clear gain. The relationships, spatial and Pearson, between eucalyptus data plant with some physical and chemical attributes of soil, in the growing season of 2011, in Selviria County, Mato Grosso do Sul State, Brazil (20 degrees 20' S lat.; 51 degrees 24' W long.), were studied in order to obtain the one that could have the best relationship in order to improve the wood productivity. Thus, a geostatistical grid was installed for the soil and plant data collection, it contained 120 sample points, in plantation of Eucalyptus camaldulensis of 2 years old. The soil was a Dystrophic Red Latosol (Haplic Acrustox) whit slope of 0.025m m(-1). Due to their excellent relationship with wood productivity, the basis diameter of the crown and the bulk density showed management specific regions of soil whit high relation to eucalyptus wood productivity.

Evaluation of figs mutant selections cv. roxo-de-Valinhos

The fig (Ficus carica L.), belonging to the Moraceas family, is one of the most important fruit crops, bringing Brazil to the condition of the tenth largest fig producer and exporter in the world. But the culture presents some problems with plant protection, and in Brazil, it is all implanted with an only cultivar, Roxo-de-Valinhos, which produces seedless fruit, not permitting the conventional improvement. In this sense, the genetic improvement by using mutagenic becomes a very important research line, that can greatly contribute to the culture development. Considering this, this study aimed to evaluate selections of fig originated from mutant plants formed by cuttings from buds irradiated with gamma ray and compare them with the main varieties of the culture in commercial plantation. By using plants originated from 5 traditional fig cultivars cuttings and 5 fig mutant selections (formed by cuttings from Roxo-de-Valinhos buds irradiated with gamma ray, in the dose of 30 Gy), spaced by 2.5 x 1.5 m. The experimental layout was a completely randomized block design, with 10 treatments, 3 repetitions and 5 plants per plot. The evaluations are made from the plants vegetative growth as well as the fruit characteristics. Through data analysis, it seems that there is variability between the mutant selections and with the traditional cultivars, and the treatment PI-189 was superior to the standard cultivar Roxo-de-Valinhos on great commercial characteristics importance, such as "number of fruit per plant", "average weight per fruit" and "productivity", having the same traits, showing itself with enormous potential for future studies.