93 resultados para after Bleil and von Dobeneck (2003)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The study aimed to quantify the color regression of enamel (E), dentine (D), and combined enamel-dentine (ED) of differently bleached ED specimens over a period of 12 months in vitro. Two ED samples were obtained from the labial surfaces of bovine teeth and prepared to a standardized thickness with the enamel and dentine layer each 1 mm. The ED samples were distributed on four groups (each n=80), in which the different bleaching products were applied on enamel (1, Whitestrips; 2, Illumine 15%; 3, Opalescence Xtra Boost) or dentine surfaces (4, mixture of sodium perborate/distilled water). Eighty ED samples were not bleached (control). Color (L*a*b*) of ED was assessed at baseline, subsequently after bleaching and at 3, 6, and 12 months of storage after bleaching (each 20 samples/group). E and D samples were prepared by removing the dentine or enamel layer of ED samples to allow for separate color analysis. Bleaching resulted in a significant color change (Delta E) of ED specimens. Within the observation period, Delta L but not Delta b declined to baseline. L* values of E and D samples also declined and were not significantly different from control samples after 12 months, while b* values did not decrease to baseline. Generally, no differences between the bleaching agents could be observed. Color change of enamel, dentine, and combined ED of in vitro bleached tooth samples is not stable over time with regard to lightness. However, yellowness did not return to baseline within 1 year.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: the aim of the present study was to compare the effects of Er:YAG and diode laser treatments of the root surface on intrapulpal temperature after scaling and root planing with hand instruments.Methods: Fifteen extracted single-rooted teeth were scaled and root planed with hand instruments. The teeth were divided into 3 groups of 5 each and irradiated on their buccal and lingual surfaces: group A: Er:YAG laser, 2.94 mum/100 mJ/10 Hz/ 30 seconds; group B: diode laser, 810 nm/1.0 W/0.05 ms/30 seconds; group C: diode laser, 810 nm/1.4 W/0.05 ms/30 seconds. The temperature was monitored by means of a type T thermocouple (copper-constantan) positioned in the pulp chamber to assess pulpal temperature during and before irradiation. Afterwards, the specimens were longitudinally sectioned, and the buccal and lingual surfaces of each root were analyzed by scanning electron microscopy.Results: In the Er:YAG laser group, the thermal analysis revealed an average temperature of -2.2 +/- 1.5degreesC, while in the diode laser groups, temperatures were 1.6 +/- 0.8degreesC at 1.0 W and 3.3 +/- 1.0degreesC at 1.4 W. Electronic micrographs revealed that there were no significant morphological changes, such as charring, melting, or fusion, in any group, although the specimens were found to be more irregular in the Er:YAG laser group.Conclusions: the application of Er:YAG and diode lasers at the utilized parameters did not induce high pulpal temperatures. Root surface irregularities were more pronounced after irradiation with an Er:YAG laser than with a diode laser.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this study was to evaluate the surface roughness of two glass-ionomer cements (Vitremer and Chelon-Fil), and one compomer (Dyract) when submitted to different finishing/polishing procedures at different times. A hundred 80-sample discs were made of each material and randomly divided into six finishing/polishing groups: mylar strip (control); Sof-Lex discs; diamond burs; diamond burs/Sof-Lex discs; 30-fluted carbide bur; 30-fluted carbide bur/Sof-Lex discs. These procedures were carried out immediately after preparation of the samples, after 24 and 168 h. Average surface roughness (Ra) was measured with a profilometer and the values were compared using anova (P < 0.05). The smoothest surface for all materials was obtained when cured in contact with the mylar strip. All other tested products increased surface roughness of restorative materials, but Sof-lex discs lead to better results. The worst results were verified with diamond burs. The finishing/polishing procedures, when performed immediately, can improve the roughness of glass-ionomer cements but not of the compomer tested.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The contractions of the rat vas deferens in response to noradrenaline are mediated through alpha(1A)-adrenoceptors. We observed participation of alpha(1B)-adrenoceptors in these contractions after castration. We now investigated the time course of this plasticity and the effects of testosterone by determining the actions of competitive antagonists on noradrenaline-induced contractions after 7, 14, 21 and 30 days of castration. BMY 7378 (8-[2-[4-(2-methoxyphenyl)-1-piperazinyl]ethyl]-8-azaspiro[4.5]decane-7,9-dione dihydrochloride) antagonised noradrenaline-induced contractions in control and castrated rats with low pA(2) values (congruent to 6.8). In control vas deferens, WB 4101 (2-(2,6-dimethoxyphenoxyethyl)aminomethyl-1,4-benzodioxane hydrochloride) had a slope in the Schild plot no different from 1.0, while slopes lower than 1.0 ( approximate to 0.6) were observed for vas deferens from castrated rats. Chloroethylclonidine was ineffective in the control vas while it inhibited noradrenaline-induced contractions in vasa from castrated rats and converted the complex antagonism by WB 4101 into simple competitive antagonism. Treatment of castrated rats with testosterone prevented the effects of castration. The results suggest that alpha(1B)-adrenoceptors are detectable in vas deferens from at least the 7th through the 30th day after castration and that testosterone prevents this plasticity. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Breeds of sheep with resistance to nematode infection often display a reduced periparturient rise (PPR) in faecal egg counts (FEC) when compared with susceptible sheep. This trial was carried out to compare the resistance of Santa Ines, an indigenous Brazilian breed of sheep, and Ile de France ewes to natural infections by gastrointestinal nematodes, especially in the periparturient period. Twelve Santa lnes and 10 Ile de France ewes were estrus synchronized and then mated (December 2001). Lambing occurred from 30 April to 19 June 2002 and the lambs were weaned at 60 days of age. Faecal egg counts, packed cell volume (PCV), total plasma protein levels and peripheral eosinophils counts were determined from November 2001 to September 2002. To prevent deaths, individual treatment with anthelmintics was provided to ewes with FEC higher than 4000 eggs per gram (EPG) or with PCV lower than 21%. The percentage of Santa Ines ewes treated with anthelmintics was lower than that of Ile de France sheep. Eight of the 10 Ile de France ewes were treated, with one of them requiring four treatments, one requiring three treatments, and two requiring two treatments. The remaining four received a single treatment. In contrast, only 5 of the 12 Santa lnes ewes required treatment and for each this was done only once. The mean values of PCV were in the normal range in the Santa Ines ewes. In contrast, mean PCVs of Ile de France ewes reached a low of 24.5% in the second month after lambing and were significantly lower than Santa Ines 1 month before lambing (P < 0.05) and 2 months after lambing (P < 0.07). The mean plasma protein level was significantly lower in the Ile de France ewes in the second month after lambing (P < 0.01) coinciding with a reduction in PCV. The ewes of both breeds had high mean numbers of eosinophils in blood, which increased even further post-weaning when a marked reduction in FEC occurred. Haemonchus larvae were the most numerous genus in faecal cultures for both breeds followed by Trichostrongylus, Oesophagostomum and Cooperia. A periparturient rise in FEC was observed in both breeds. However, Santa Ines ewes showed a higher capacity to support the infection in an environment contaminated with large number of infective larvae of gastrointestinal nematodes. (C) 2004 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We investigated effects of fruit colour (red, black or white), habitat (anthropogenic edges and forest interior) and fragment size on the removal of artificial fruits in semideciduous forests in south-east Brazil. Eight forest fragments ranging from 251 to 36,000 ha were used. We used artificial fruits, which were placed on shrubs between I and 2 m in height and checked after 48 and 96 h for peck marks in the fruits. All three variables affected the probability of consumption of our fruit models. Red and black fruits were statistically more pecked than the white fruits. The probability of fruit consumption was lower in the interior than at the edge and less in small than in large fragments. However, the decrease fruit consumption in small compared with large fragments was more accentuated for red and black fruits than for white fruits. Our results show that habitat reduction and edges affect the chances of a fruit being eaten by birds, which may ultimately affect plant fitness in forest fragments. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Statement of problem. Highly polished enamel surfaces arc recommended for axial tooth surfaces that will serve as guiding planes and be contacted by component parts of a removable partial denture. There is little evidence to support the assumption that this tooth modification will provide accurate adaptation of the framework and prevent build-up of plaque.Purpose. The aim of this investigation was to evaluate the surface roughness of the tooth enamel, prepared to serve as guiding planes, with different polishing systems.Material and methods. Four different methods (designated A, B, C, and D) for finishing and polishing the prepared enamel surfaces of 20 freshly extracted third molar teeth were studied. Each method involved 3, 4, or 5 different steps. The roughness of each specimen was measured at the start of each method before recontouring, after recontouring, and after each step of the 4 finishing and polishing procedures. The 4 experimental finishing methods were applied after recontouring the axial surfaces (buccal, lingual, and proxinial) of each tooth. Thus the 20 teeth (60 surfaces) were finished and polished by use of 1 of the experimental methods. Surface roughness was measured with a profilometer (mum); the readings of the unpolished enamel Surfaces were recorded as control measurements. Results were statistically analyzed with one-way analysis of variance followed by Tukey's test at the 95% level of confidence.Results. The highest roughness mean values (14.41 mum to 16.44 mum) were found when the diamond bur was used at a high speed for tooth preparation. A significant decrease in roughness values was observed with the diamond bur at a low speed (P<.05). Analysis of the roughness values revealed that all polishing methods produced surface roughness similar to that of the corresponding control teeth.Conclusion. Within the limitations of this study, all finishing procedures tested effectively promoted an enamel surface similar to the original unpolished enamel.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this investigation was to determine whether changes in myosin heavy chain (MHC) expression and atrophy in rat skeletal muscle are observed during transition from cardiac hypertrophy to chronic heart failure (CHF) induced by aortic stenosis (AS). AS and control animals were studied 12 and 18 weeks after surgery and when overt CHF had developed in AS animals, 28 weeks after the surgery. The following parameters were studied in the soleus muscle: muscle atrophy index (soleus weight/body weight), muscle fibre diameter and frequency and MHC expression. AS animals presented decreases in both MHC1 and type I fibres and increases in both MHC2a and type IIa fibres during late cardiac hypertrophy and CHF. Type IIa fibre atrophy occurred during CHF. In conclusion, our data demonstrate that skeletal muscle phenotype changes occur in both late cardiac hypertrophy and heart failure; this suggests that attention should be given to the fact that skeletal muscle phenotype changes occur prior to overt heart failure symptoms.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The type of tillage and crop systems used can either degrade or cause a recovery of the structure of agricultural soils. The objective of this study was to determine the structural stability of the soil using mean weight diameter (MWD) of soil aggregates in three different periods of a succession of crops consisting of beans/cover plants/maize under no tillage (NT) and conventional tillage (CT) management systems. Soils were sampled at 0- to 5-cm and 5- to 15-cm depths in three periods (P1, P2, P3): 1) November 2002 (spring/summer), 2) April 2003 (beginning of autumn), and 3) December 2003 (end of spring/beginning of summer). Aggregate stability was determined by wet sieving. The effects of the tillage systems, vegetal residues, and sampling depths on the structural stability of the aggregates were assessed and then related to organic matter (OM) contents. Aggregate stability showed temporal variation as a function of OM contents and sampling period. No tillage led to high MWD values in all study periods. The lowest MWD values and OM contents were observed 4 months after the management of the residues of cover plants. This finding is consistent with the fact that at the time of the samplings, most of the OM had already mineralized. The residues of sunn-hemp, millet, and spontaneous vegetation showed similar effects on soil aggregate stability.