In Vivo study of an intracanal dressing of calcium hydroxide/chlorhexidine in necrotic primary teeth

AIM:To evaluate the clinical and radiographic success of endodontic treatment in human primary teeth with necrotic pulp with and without radiographically visible furcal/periapical lesion treated with a calcium hydroxide (CH) and chlorhexidine (CHX) intracanal dressing. The tested hypothesis was that there is no difference in the clinical and radiographic success in primary teeth medicated with CH pastes prepared with polyethylene glycol (PEG) or CHX.METHODS:Thirty-two teeth with necrotic pulp were used in this randomized clinical study: 12 without and 20 with lesion. Canals were prepared and medicated with CH pastes with polyethylene glycol (CH/PEG) (n=16) or 2% CHX gel (CH/CHX) (n=16). Definitive filling was done after 30 days. The teeth were clinically and radiographically examined during 12 months to determine the success of the endodontic therapy. Data from clinical and radiographic examination of the initial condition and 12 months after treatment were compared using the Z test (α = 0.05).RESULTS:There was no significant difference (p>0.05) in the success rate of teeth with and without lesion medicated with CH/PEG or CH/CHX. No significant difference (p>0.05) was found between the pastes regardless of the presence of lesion.CONCLUSIONS:Combination of CHX and CH was not more effective than the CH/PEG paste, as similar clinical and radiographic success rate was observed in teeth medicated with either type of intracanal dressing.

Utilization of teflon and aluminum oxide for wheel cleaning in Minimum Quantity Lubrication (MQL) grinding

Researches concerning cooling-lubrication optimization in grinding have been conducted to contribute to a more sustainable process. An alternative to flood coolant is minimum quantity lubrication (MQL), which spray oil droplets in a compressed air jet. However, problems related to wheel cleaning were reported, due to wheel loading by a mixture of chips and oil, resulting in worsening of surface quality. This work aims to evaluate the viability of Teflon and aluminum oxide for wheel cleaning, compared to MQL without cleaning and MQL with cleaning by compressed air, through the following output variables: surface roughness, roundness, wheel wear, grinding power and acoustic emission. Vickers microhardness measurements and optical microscopy were also carried out. The results showed that both materials were efficient in cleaning the wheel, compared to MQL without cleaning, but not as satisfactory as compressed air. Much work is to be done in order to select the right material for wheel cleaning.

Desgaste de dressadores de ponta única fabricados com diamantes cvd nacionais

This study attempted to observe the performance of three types of diamonds, two natural and one synthetic, to determine which features longer life and greater wear than the others. The methodology employed in this study was to dressed an aluminum oxide grinding wheel, and every twenty paces with a advance of depth dressing of 40 µm per passes, take an image of the tip in a horizontal position and the other in the vertical position of this diamond in a stereoscopic. Thereafter, the dresser was replaced in the rectifier to conduct a new dressing. The criteria to completion of the test was the spark generated by the grinding wheel contact with the base of the dresser, which indicates the end of the contact with the diamond wheel. After the tests, was calculated the areas worn of each diamond in accordance with each image obtained through the aid of a graphics software. The data were then arranged in graphs.

Effect of Indomethacin on Surface Treatment and Intracanal Dressing of Replanted Teeth in Dogs

Purpose: This study evaluated the healing process of teeth replanted after root treatment and intracanal dressing with indomethacin alone or indomethacin with calcium hydroxide (Ca[OH](2)).Materials and Methods: Through a case-control study, 24 teeth of 6 adult dogs were extracted, dried, and divided into 4 groups according to the root surface treatment protocols performed before replantation and the intracanal medication used after replantation. In group 1 (negative control), root surfaces were treated by immersion in a 0.9% saline solution and then replanted. In the other groups, the roots were immersed for 10 minutes in Ca(OH)(2) (group 2), indomethacin (group 3), or a solution of indomethacin and Ca(OH)(2) (group 4). After 2 weeks, group 1 teeth were subjected to single-visit root canal treatment and obturation with gutta-percha and sealer consisting of zinc oxide and eugenol. The teeth in the other groups were subjected to intracanal dressing with the same material used for immersion. After an additional period of 28 weeks, the animals were euthanized and the jaws containing the replanted teeth were processed for histologic analysis. Histometric values were statistically analyzed, with significance set at a P value less than or equal to .05.Results: Group 1 exhibited significantly more normal periodontium than group 4 (P = .02). Total resorption was greater in group 4 than in group 1 (P = .02). No statistically significant difference in the percentage of surface resorption or in total inactive resorption was observed between the groups.Conclusions: The findings of this study suggest that intracanal dressing and topical root treatment with Ca(OH)(2) with or without indomethacin is not recommended for teeth dried for 50 minutes, but the use of indomethacin alone as root surface treatment for delayed tooth replantation deserves further study using longer drying periods. In addition, the present results suggest that a single-visit root canal, performed up to 2 weeks after replantation, might be indicated for teeth dried for up to 50 minutes. (C) 2014 American Association of Oral and Maxillofacial Surgeons

Cellular and Molecular Tissue Response to Triple Antibiotic Intracanal Dressing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tool Condition Monitoring of Single-Point Dresser Using Acoustic Emission and Neural Networks Models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Rotary Instrument Associated with Different Irrigation Techniques on Removing Calcium Hydroxide Dressing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Monitoramento da condição da ferramenta de dressagem usando sinais de vibração e modelos neurais

Pós-graduação em Engenharia Elétrica - FEB

Análise do comportamento do desgaste de dressadores de ponta única confeccionados com diamantes naturais e sintético piramidais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of calcium hydroxide dressing on push-out bond strength of endodontic sealers to root canal dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Amniotic membrane as a biological dressing for 5-fluoruracil-induced oral mucositis in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of lamellar gel phase emulsion containing marigold oil (Calendula officinalis) as a potential modern wound dressing

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determination of the p-monochlorophenol residue in the calcium hydroxide plus p-monochlorophenol combination used as an intracanal dressing in pulpless teeth of dogs with induced chronic periapical lesion

To determine the presence of p-monochlorophenol in the calcium hydroxide (Calen) + p-monochlorophenol combination after its use as intracanal dressing, periapical lesions were induced in 60 root canals of upper and lower premolars of four dogs, After biomechanical preparation, the root canals received the intracanal medication, which was removed from the apical third after 2, 4, 7, and 14 days for chemical analysis by spectrophotometry, the results showed a p-monochlorophenol loss of approximately 50.0% in the dressing after 48 h, with no further significant loss after longer periods of times, p-Monochlorophenol was still present in the medication after 14 days.

Influence of irrigation and intracanal dressing on the healing process of dogs' teeth with apical periodontitis.

Dogs' teeth with apical periodontitis were treated endodontically, Dakin's solution being used in an experimental group as the irrigation solution, and camphorated paramonochlorophenol as an intracanal dressing. For a second group of teeth, the irrigation solution used was physiologic saline, dry cotton only being placed into the pulpal chamber to take the place of an intracanal dressing. In a second visit, overinstrumentation and a new application of the same kind of dressing were performed, the root canals being then filled with gutta-percha cones and zinc oxide-eugenol cement. Other specimens were treated, in one visit, where physiologic saline or Dakin's solution were the irrigation solutions. The animals were sacrificed 6 months after the obturation of the root canals. Histologic exams showed better results for the experimental group where Dakin's solution and camphorated paramonochlorophenol had been used, with signs of repair characterized by newly formed cementum and bone tissue, as well as a marked reduction in size of the periapical lesions. No differences were seen in the results with physiologic saline or Dakin's solution as irrigants.

Ultra-precision face grinding with constant pressure, lapping kinematics, and SiC grinding wheels dressed with overlap factor

Several machining processes have been created and improved in order to achieve the best results ever accomplished in hard and difficult to machine materials. Some of these abrasive manufacturing processes emerging on the science frontier can be defined as ultra-precision grinding. For finishing flat surfaces, researchers have been putting together the main advantages of traditional abrasive processes such as face grinding with constant pressure, fixed abrasives for two-body removal mechanism, total contact of the part with the tool, and lapping kinematics as well as some specific operations to keep grinding wheel sharpness and form. In the present work, both U d-lap grinding process and its machine tool were studied aiming nanometric finishing on flat metallic surfaces. Such hypothesis was investigated on AISI 420 stainless steel workpieces U d-lap ground with different values of overlap factor on dressing (Ud=1, 3, and 5) and grit sizes of conventional grinding wheels (silicon carbide (SiC)=#800, #600, and #300) applying a new machine tool especially designed and built for such finishing. The best results, obtained after 10 min of machining, were average surface roughness (Ra) of 1.92 nm, 1.19-μm flatness deviation of 25.4-mm-diameter workpieces, and mirrored surface finishing. Given the surface quality achieved, the U d-lap grinding process can be included among the ultra-precision abrasive processes and, depending on the application, the chaining steps of grinding, lapping, and polishing can be replaced by the proposed abrasive process.