Aberrant crypt foci and colon cancer: comparison between a short- and medium-term bioassay for colon carcinogenesis using dimethylhydrazine in Wistar rats

Aberrant crypt foci (ACF) in the colon of carcinogen-treated rodents are considered to be the earliest hallmark of colon carcinogenesis. In the present study the relationship between a short-term (4 weeks) and medium-term (30 weeks) assay was assessed in a model of colon carcinogenesis induced by dimethylhydrazine (DMH) in the rat. Six-week-old male Wistar rats were given subcutaneous injections of DMH (40 mg/kg) twice a week for 2 weeks and killed at the end of the 4th or 30th week. ACF were scored for number, distribution pattern along the colon and crypt multiplicity in 0.1% methylene-blue whole-mount preparations. ACF were distinguished from normal crypts by their larger size and elliptical shape. The incidence, distribution and morphology of colon tumors were recorded. The majority of ACF were present in the middle and distal colon of DMH-treated rats and their number increased with time. By the 4th week, 91.5% ACF were composed of one or two crypts and 8.5% had three or more crypts, while by the 30th week 46.9% ACF had three or more crypts. Thus, a progression of ACF consisting of multiple crypts was observed from the 4th to the 30th week. Nine well-differentiated adenocarcinomas were found in 10 rats by the 30th week. Seven tumors were located in the distal colon and two in the middle colon. No tumor was found in the proximal colon. The present data indicate that induction of ACF by DMH in the short-term (4 weeks) assay was correlated with development of well-differentiated adenocarcinomas in the medium-term (30 weeks) assay.

Origin of sensory and autonomic innervation of the rat temporomandibular joint: A retrograde axonal tracing study with the fluorescent dye fast blue

Previous studies that have used retrograde axonal tracers (horseradish peroxidase alone or conjugated with wheat germ agglutinin) have shown that the temporomandibular joint (TMJ) is supplied with nerve fibers originating mainly from the trigeminal ganglion, in addition to other sensory and sympathetic ganglia. The existence of nerve fibers in the TMJ originating from the trigeminal mesencephalic nucleus is unclear, and the possible innervation by parasympathetic nerve fibers has not been determined. In the present work, the retrograde axonal tracer, fast blue, was used to elucidate these questions and re-evaluated the literature data. The tracer was deposited in the supradiscal articular space of the rat TMJ, and an extensive morphometric analysis was performed of the labeled perikaryal profiles located in sensory and autonomic ganglia. This methodology permitted us to observe labeled small perikaryal profiles in the trigeminal ganglion, clustered mainly in the posterior-lateral region of the dorsal, medial and ventral thirds of horizontal sections, with some located in the anterior-lateral region of the ventral third. Sensory perikarya were also labeled in the dorsal root ganglia from C2 to C5. No labeled perikaryal profiles were found in the trigeminal mesencephalic nucleus. on the other hand, autonomic labeled perikaryal profiles were distributed in the sympathetic superior cervical and stellate ganglia, and parasympathetic otic ganglion. Our results confirmed those of previous studies and also demonstrated that: (i) there is a distribution pattern of labeled perikaryal profiles in the trigeminal ganglion; (ii) some perikaryal profiles located in the otic ganglion were labeled; and (iii) the trigeminal mesencephalic nucleus did not show any retrogradely labeled perikaryal profiles.

Stress Analysis in Platform-Switching Implants: A 3-Dimensional Finite Element Study

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and pen-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the Solid Works 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0 degrees), oblique (45 degrees), and lateral (90) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the pen-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

Características cefalométricas do padrão face longa

Este estudo determinou as características cefalométricas dos indivíduos portadores de Padrão Face Longa em comparação com indivíduos Padrão I. Um total de 73 telerradiografias em norma lateral, sendo 34 Padrão Face Longa e 39 Padrão I, foram selecionadas com base na morfologia facial, não considerando as relações oclusais e sagitais. Foram avaliados: padrão de crescimento facial, alturas faciais anteriores e posterior, relação maxilo-mandibular, além das relações dentárias com suas bases apicais. de uma forma geral, os indivíduos Padrão Face Longa apresentaram grandes desvios em relação aos indivíduos Padrão I, sendo a doença decorrente de um desequilíbrio entre os componentes verticais. Pôde-se observar que os valores das grandezas AFAT, AFAI, AFATperp, AFAIperp, 1-PP, 6-PP, 1-PM, SNB, ANB, ângulo goníaco, ângulo plano mandibular, além das proporções AFAI/AFAT e AFAIperp/AFATperp, estavam significantemente alterados para os indivíduos Padrão Face Longa. Com base nos resultados obtidos neste estudo, verificou-se que esses indivíduos caracterizavam-se pelo padrão de crescimento vertical e por um aumento da altura facial anterior inferior - conseqüentemente, da altura facial anterior total - estando a deformidade localizada abaixo do plano palatino. Foram observados ainda um retrognatismo maxilar e mandibular, além da presença de extrusão dentária anterior (superior e inferior) e póstero-superior, com os incisivos superiores bem posicionados em suas bases e os inferiores lingualizados.

Effect of chlorhexidine on bond strength of two-step etch-and-rinse adhesive systems to dentin of primary and permanent teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In vivo uptake of a haem analogue Zn protoporphyrin IX by the human malaria parasite P. falciparum-infected red blood cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New occurrence of microchromosomes B in Moenkhausia sanctaefilomenae (Pisces, Characidae) from the Parana River of Brazil: analysis of the synaptonemal complex

The Moenkhausia sanctaefilomenae specimens showed a karyotype consisting of 2n = 50 chromosomes with 12 metacentrics, 36 submetacentrics and two subtelocentrics. In addition to the basic karyotype, all the males specimens have cells ranging from zero to two B microchromosomes in mitotic metaphases. These chromosomes were not observed in the female specimens. C-band analysis showed a distribution pattern of characteristic heterochromatin with interstitial and centromeric blocks. However, the B chromosomes were faintly stained with C-banding and were not fluorescent with CMA(3) staining. The meiotic studies showed the formation of bivalents in metaphase I and in pachytene under an optical microscope. Through synaptonemal complex analysis with an electron microscope, the pachytene showed 25 bivalents completely paired and a small bivalent corresponding to the B chromosomes. In the same preparation, one of the B chromosomes was observed in a univalent form. on the basis of pairing behavior and morphology it is assumed that B chromosomes of M. sanctaefilomenae show homology between them and their evolutionary aspects are discussed.

Cytogenetic analysis of three species of the genus Haemulon (Teleostei : Haemulinae) from Margarita Island, Venezuela

This paper describes the karyotype analysis of Haemulon aurolineatum, Haemulon bonariensis and Haemulon plumierii, by Giemsa staining, C-banding, Ag-staining and fluorescent in situ hybridization (FISH), to locate the 18S and 5S rRNA genes. Diploid modal count in the three species was 2n = 48 acrocentric elements. Except for pair 24, which exhibited an unmistakable secondary constriction in all three species, it was not possible to classify them as homologous to each other because differences in chromosome size were too slight between adjacent pairs within a size-graded series. Ag-NOR clusters were located in pair 24 in the three species with signal located on the secondary constriction of these chromosomes. C-banding demonstrated that the three species share the same distribution pattern of the constitutive heterochromatin with centromeric heterochromatic blocks in the 23 chromosome pairs and a pericentromeric block in pair 24 which is coincident with the NORs. FISH experiments showed that 18S rDNA sequences were located coincident with the Ag-NOR site in the three species; however, differences in both the number and chromosome distribution of 5S-rDNA cluster were detected among them. Our data suggest that chromosome evolution of Haemulon has been preserved from major changes in the karyotypic macrostructure, whereas microstructural changes have occurred.

Physical and chemical characteristics of the sediment in the estuarine region of Cananeia (SP), Brazil

Physical and chemical characteristics of sediment were analyzed at eight sampling areas in the estuarine region of Cananeia (SP), Brazil. The samples were collected in 1995 during four periods; summer, autumn, winter and spring. Total nitrogen and phosphorus concentrations, redox potential, water and organic matter percentage, sand and silt percentage and grain size were determined in six different layers of 20 cm deep columns of sediment. In general, the nutrient concentration and the percentage of organic matter decreased with depth and greater variations were observed in the first centimeter of the samples. Differences in nutrient concentration and organic matter were also observed during the study period. The highest concentrations were recorded during the rainy season (February) as a consequence of an accumulation of organic matter brought into the system by rivers and adjacent flooded areas. In general, the sediments had oxidized characteristics until the 5 or 10 cm depth in areas near the rich coastal vegetation. However, in areas open to the ocean, the entire sediment columns were almost completely oxidized.

Distribuição espacial em pequena escala de um anfípode exótico em fragmento florestal e plantio de espécies nativas

Anthropogenic interferences in natural environments cause the breakage of spatial and competitive barriers, which may infuence the spatial distribution of species. In this study, we describe the spatial distribution of an exotic amphipod, Talitroides topitotum, in two distinct sites, a forest fragment and a plantation of native arboreal species. We analyzed possible variations in this spatial distribution in different periods of the year and verifed whether the vegetation cover and the litter layer depth may explain the distribution pattern of this species. We performed analyses of frequency distribution to determine the pattern of this species spatial distribution, as well as correlation tests to determine the effect of these two variables of habitat structure. The spatial distribution analysis revealed that T. topitotum presents aggregated distribution in both areas, indicating that this species has low environmental demands or that both areas are below a minimum environmental quality threshold. However, even with this similarity, the population in the fragmented site presented a higher index of aggregation when compared with the population of the plantation site. Corroborating previous studies, there was a negative correlation between abundance of T. topitotum and litter layer depth in the plantation site. Studies on invaded habitats can help understand how invasive species occupy new environments and the factors that can infuence their spatial distribution.

Ultra-structure and histochemistry of digestive cells of Podisus nigrispinus (Hemiptera: Pentatomidae) fed with prey reared on bt-cotton

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morphological Studies on the Mature Worker Larvae of Paratrechina fulva (Hymenoptera, Formicidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microhabitat use by Peucetia flava (Oxyopidae) on the glandular plant Rhyncanthera dichotoma (Melastomataceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inflorescence and floral development of Dahlstedtia species (Leguminosae: Papilionoideae: Millettieae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Finite element analysis and fracture resistance testing of a new intraradicular post

Objectives: The objective of the present study was to evaluate a prefabricated intraradicular threaded pure titanium post, designed and developed at the Sao Jose dos Campos School of Dentistry - UNESP, Brazil. This new post was designed to minimize stresses observed with prefabricated post systems and to improve cost-benefits. Materials and and methods: Fracture resistance testing of the post/core/root complex, fracture analysis by microscopy and stress analysis by the finite element method were used for post evaluation. The following four prefabricated metal post systems were analyzed: group 1, experimental post; group 2, modification of the experimental post; group 3, Flexi Post, and group 4, Para Post. For the analysis of fracture resistance, 40 bovine teeth were randomly assigned to the four groups (n=10) and used for the fabrication of test specimens simulating the situation in the mouth. The test specimens were subjected to compressive strength testing until fracture in an EMIC universal testing machine. After fracture of the test specimens, their roots were sectioned and analyzed by microscopy. For the finite element method, specimens of the fracture resistance test were simulated by computer modeling to determine the stress distribution pattern in the post systems studied. Results: The fracture test presented the following averages and standard deviation: G1 (45.63 +/- 8.77), G2 (49.98 +/- 7.08), G3 (43.84 +/- 5.52), G4 (47.61 +/- 7.23). Stress was homogenously distributed along the body of the intraradicular post in group 1, whereas high stress concentrations in certain regions were observed in the other groups. These stress concentrations in the body of the post induced the same stress concentration in root dentin. Conclusions: The experimental post (original and modified versions) presented similar fracture resistance and better results in the stress analysis when compared with the commercial post systems tested (08/2008PA/CEP).