Influence of hygrothermal conditioning on the elastic properties of carall laminates

The influence of hygrothermal conditioning on mechanical properties of Carall laminates have been investigated by tensile and compression tests. The environmental factors can limit the applications of composites by deteriorating the mechanical properties during service. The importance of temperature at the time of conditioning plays an important role in environmental degradation of such composite materials. In this work, the results show that for carbon fiber/epoxy composites tensile and compression values decrease after hygrothermal conditioning. However, the changes on mechanical properties of Carall are negligible, regardless the hygrothermal conditioning.

Bond strength of resin modified glass ionomer cement to primary dentin after cutting with different bur types and dentin conditioning

The aim of this in vitro study was to evaluate the effect of different bur types and acid etching protocols on the shear bond strength (SBS) of a resin modified glass ionomer cement (RM-GIC) to primary dentin. Forty-eight clinically sound human primary molars were selected and randomly assigned to four groups (n=12). In G1, the lingual surface of the teeth was cut with a carbide bur until a 2.0-mm-diameter dentin area was exposed, followed by the application of RM-GIC (Vitremer - 3M/ESPE) prepared according to the manufacturer's instructions. The specimens of G2, received the same treatment of G1, however the dentin was conditioned with phosphoric acid. In groups G3 and G4 the same procedures of G1 and G2 were conducted respectively, nevertheless dentin cutting was made with a diamond bur. The specimens were stored in distilled water at 37 degrees C for 24h, and then tested in a universal testing machine. SBS. data were submitted to 2-way ANOVA (= 5%) and indicated that SBS values of RM-GIC bonded to primary dentin cut with different burs were not statistically different, but the specimens that were conditioned with phosphoric acid presented SBS values significantly higher that those without conditioning. To observe micromorphologic characteristics of the effects of dentin surface cut by diamond or carbide rotary instruments and conditioners treatment, some specimens were examined by scanning electron microscopy. Smear layer was present in all specimens regardless of the type of rotary instrument used for dentin cutting, and specimens etched with phosphoric acid presented more effective removal of smear layer. It was concluded that SBS of a RM-GIC to primary dentin was affected by the acid conditioning but the bur type had no influence.

Interferon Alpha-2B and liver resection to treat multifocal hepatic epithelioid hemangioendothelioma: A relevant approach to avoid liver transplantation

Background. Hepatic epithelioid hemangioendothelioma is a rare malignant tumor of vascular origin with frequent multifocal appearance. Liver resection may cause tumor spread. Liver transplantation has been indicated for unresectable nodules. We hypothesized that adjuvant interferon treatment is effective to prevent metastasis after liver resection. We report a case of multifocal hepatic epithelioid hemangioendothelioma successfully treated with interferon pulse therapy and bilobar hepatic resection.Methodology. CT scan and magnetic resonance imaging diagnosed three nodules in the liver (segments IV, VI and VII). Histopathology and specific immunostaining of a percutaneous nodule biopsy confirmed the diagnosis of hepatic epithelioid hemangioendothelioma. The treatment protocol included daily interferon alpha 2b 9 weeks before and 1 week after resection of liver segments IV, VI and VII.Results. The postoperative outcome was complicated by a self-limited biliary fistula. The patient remains tumor free at 3 years after liver resection and currently enjoys excellent health.Conclusion. Interferon pulse therapy and hepatic resection was a good option to treat multifocal bilobar hepatic epithelioid hemangioendothelioma; it may prevent metastasis dissemination.

Effect of pancreas transplantation on the prevention of nephropathy in alloxan-induced diabetic rats

We studied the effects of pancreas transplantation on kidney lesions of rats with alloxan-induced diabetes. Ninety inbred male Lewis rats were randomly assigned to 3 experimental groups: group NC included 30 non-diabetic control rats, group DC included 30 alloxan-induced diabetic control rats, and group PT included 30 alloxan-induced diabetic rats that received pancreas transplants from normal donor Lewis rats. Each group was further divided into 3 subgroups of 10 rats which were sacrificed at 1, 3, and 6 months of follow-up, respectively. Clinical and laboratory parameters during these periods were documented. The kidneys of 5 rats in each subgroup were studied and 50 glomeruli and tubules from each kidney were analyzed by light microscopy by two different investigators in a double-blind study. There was progressive glomerular basement membrane thickening (GBMT), mesangial enlargement (ME), and Bowman's capsule thickening (BCT) in kidneys of rats in the 3 experimental groups during follow-up. These alterations were significantly higher in DC rats (GBMT: 1.99 +/- 0.31; ME: 2.00 +/- 0.33; BCT: 1.88 +/- 0.27) when compared to NC(GBMT: 1.54 +/- 0.30; ME: 1.56 +/- 0.47; BCT: 1.36 +/- 0.35) and PT rats (GBMT: 1.49 +/- 0.29; ME: 1.57 +/- 0.36; BCT: 1.35 +/- 0.28) at 6 months (P<0.01). The extent of GBMT, ME, and BCT observed in DC rats at 1 and 3 months was not significantly different from NC and PT rats. The amount of kidney lesions in PT rats was similar to that of NC rats and lower than those of DC rats at 6 months (P<0.01). In addition, Armanni-Ebstein lesions of the tubules (AE) and tubular lumen protein (PRO) observed in DC rats were not present in NC or PT rats. We conclude that pancreas transplantation in alloxan-induced diabetic rats prevents the development of kidney lesions beginning at 6 months after transplantation.

METABOLIC EFFECT OF PANCREATICODUODENAL TRANSPLANTATION IN DIABETIC RATS

Outbred Wistar rats were randomly assigned to three experimental groups: GI, 10 nondiabetic control rats; GII, 10 alloxan-diabetic control rats; GIII, 25 alloxan-diabetic rats that received pancreaticoduodenal transplantation (PDT) from normal donor Wistar rats and were immunosuppressed with cyclosporin A. For 7 prior and 4, 7, 14, 21, and 30 days posttransplantation (during which the animals were housed in metabolic cages for periods of 24 hours) body weight, water and food intake, urine output, blood and urinary glucose, plasma insulin, and glucagon were recorded. These parameters were also concurrently recorded for diabetic and nondiabetic control rats. Animals were sacrificed after 30 days and histological and immunohistochemical studies of the pancreas were performed. Pancreatic transplants consistently and significantly improved the metabolic abnormalities of the diabetic rat (P < 0.01) by restoring body weight gain, and by immediate relief of hyperglycemia, glucosuria, polyuria, polydipsia, and also the low levels of plasma insulin. The plasma glucagon, elevated in diabetic control rats, did not change after transplant.

Effect of thermal conditioning during embryonic development on aspects of physiological responses of broilers to heat stress

The purpose of the present study was to investigate the effect of thermal conditioning, (through exposure to heat stress), during pre-hatch development on some physiological responses of post-hatch broilers to a post-natal heat stress challenge. Exposure to heat stress at this stage, we hope, may possibly induce epigenetic heat adaptation. Incubating eggs were exposed to temperature of 39.0degreesC for 2 h from Day 13 to 17 of incubation. At 33, 35, 37, 39, 41 and 43 d of age, the broilers hatched from these eggs were housed individually in open-circuit respiration cells. The climatic chambers were set to 22degreesC and increased to 30degreesC for 4 h. O-2 consumption and CO2 production of each chicken was monitored continuously in order to calculate the heat production. Blood samples were obtained before and during the 4 h heat stress. Thermal conditioning during incubation did not affect the plasma T-4, corticosterone, glucose, uric acid and CK concentrations. Temperature challenge, decreased plasma T-3 of broilers of both groups but the decrease was greater in pre-conditioned broilers compared with controls. A similar trend was observed for triglycerides. These changes did not affect total heat production. Since decreased T3 and triglyceride levels are part of the mechanisms for thermoregulation, these suggest that thermal conditioning during incubation can improve the broiler chicken capability for thermotolerance at later post-hatch age. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Protective effect of prior physical conditioning on relaxing response of corpus cavernosum from rats made hypertensive by nitric oxide inhibition

The aim of this work was to evaluate the influence of run training on the responsiveness of corpus cavernosum (CC) from rats made hypertensive by treatment with nitric oxide (NO) synthesis inhibitor. Wistar rats were divided into sedentary control (C-SD), exercise training (C-TR), N(omega)-nitro-L-arginine methyl ester (L-NAME) sedentary (LN-SD) and L-NAME trained (LN-TR) groups. The run training program consisted in 8 weeks in a treadmill, 5 days/week, each session lasted 60 min. L-NAME treatment (2 and 10mg/rat/day) started after 4 weeks of prior physical conditioning and lasted 4 weeks. Concentration-response curves were obtained for acetylcholine (ACh), sodium nitroprusside (SNP), sildenafil and BAY 41-2272. The effect of electrical field stimulation (EFS) on the relaxations responses of CC was evaluated. Run training prevented the arterial hypertension induced by L-NAME treatment (LN-SD: 135+/-2 and 141+/-2 mm Hg for both doses of L-NAME) compared to LN-SD groups (154+/-1 and 175+/-2 mm Hg, for 2 and 10 mg of L-NAME, respectively). Run training produced an increase in the maximal responses (E(max)) of CC for ACh (C-SD: 47+/-3; C-TR: 5271; and LN-TR: 53+/-3%) and SNP (C-SD: 8971; C-TR: 9871; and LN-TR: 95+/-1%). Both potency and E(max) for ACh were reduced in a dose of 10 mg of L-NAME, and run training restored the reduction of E(max) for ACh. No changes were found for BAY 41-2271 and sildenafil. Relaxing responses to EFS was reduced by L-NAME treatment that was restored by prior physical conditioning. In conclusion, our study shows a beneficial effect of prior physical conditioning on the impaired CC relaxing responses in rats made hypertensive by chronic NO blockade.

Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic

Statement of problem. It is not clear how different glass ceramic surface pretreatments influence the bonding capacity of various luting agents to these surfaces.Purpose. The purpose of this study was to evaluate the microtensile bond strength (mu TBS) of 3 resin cements to a lithia disilicate-based ceramic submitted to 2 surface conditioning treatments.Material and methods. Eighteen 5 X 6 X 8-mm ceramic (IPS Empress 2) blocks were fabricated according to manufacturer's instructions and duplicated in composite resin (Tetric Ceram). Ceramic blocks were polished and divided into 2 groups (n=9/treatment): no conditioning (no-conditioning/control), or 5% hydrofluoric acid etching for 20 seconds and silanization for 1 minute (HF + SIL). Ceramic blocks were cemented to the composite resin blocks with I self-adhesive universal resin cement (RelyX Unicem) or 1 of 2 resin-based luting agents (Multilink or Panavia F), according to the manufacturer's instructions. The composite resin-ceramic blocks were stored in humidity at 37 degrees C for 7 days and serially sectioned to produce 25 beam specimens per group with a 1.0-mm(2) cross-sectional area. Specimens were thermal cycled (5000 cycles, 5 degrees C-55 degrees C) and tested in tension at 1 mm/min. Microtensile bond strength data (MPa) were analyzed by 2-way analysis of variance and Tukey multiple comparisons tests (alpha=.05). Fractured specimens were examined with a stereomicroscope (X40) and classified as adhesive, mixed, or cohesive.Results. The surface conditioning factor was significant (HF+SIL > no-conditioning) (P<.0001). Considering the unconditioned groups, the mu TBS of RelyX Unicem was significantly higher (9.6 +/- 1.9) than that of Multilink (6.2 +/- 1.2) and Panavia F (7.4 +/- 1.9). Previous etching and silanization yielded statistically higher mu TBS values for RelyX Unicem (18.8 +/- 3.5) and Multilink (17.4 +/- 3.0) when compared to Panavia F (15.7 +/- 3.8). Spontaneous debonding after thermal cycling was detected when luting agents were applied to untreated ceramic surfaces.Conclusion. Etching and silanization treatments appear to be crucial for resin bonding to a lithia disilicate-based ceramic, regardless of the resin cement used.

Effect of bur type and conditioning on the surface and interface of dentine

The purpose of this in vitro study was to evaluate the surface and resin-dentine interface characteristics of permanent tooth dentine cut with diamond or carbide burs and treated with phosphoric acid (PA) or an acidic conditioner. Labial surfaces of permanent incisors were prepared into dentine with high-speed carbide or diamond burs and divided into two halves. Phosphoric acid 36% was applied on one half and non-rinse conditioner (NRC) was applied on the other half. Ten randomly selected scanning electron microscopy (SEM) fields from each specimen (n = 15) were evaluated. Occlusal surfaces of third molars were divided in two halves for evaluation of the resin-dentine interface. The halves were randomly assigned to one of each conditioner and restored with Prime & Bond NT/Spectrum. Ten specimens were analysed by SEM to evaluate hybrid layer formation and interfacial seal. We observed that surfaces prepared with carbide bur presented less residual smear plugs (P < 0.05) than surfaces prepared with diamond burs. Surfaces conditioned with NRC, which is a smear layer modifier, presented more residual smear plugs than surfaces conditioned with PA (P < 0.05). Treatment with PA resulted in more sealed interfaces than specimens treated with NRC. Within the limitations of this study the results showed that carbide burs leave a surface that is more conducive to bonding than diamond burs.