Influence of fluoride dentifrice on brushing abrasion of eroded human enamel: An in situ/ex vivo study

This in situ/ex vivo study assessed the effect of fluoride dentifrice on eroded enamel subjected to brushing abrasion. In a crossover study performed in 2 phases, 10 volunteers wore acrylic palatal appliances, each containing 3 human enamel blocks. Dentifrice was used to brush the volunteers' teeth and the specimens subjected to abrasion. In phases A and B the dentifrices used had the same formulation, except for the absence or presence of fluoride, respectively. The blocks were subjected to erosion by immersion of the appliances in a cola drink for 5 min, 4 times a day. Then the blocks were brushed, and the appliance was replaced into the mouth. Enamel alterations were determined using profilometry and percentage change in surface microhardness (%SMHC) tests. The data were tested using the paired t test. The mean wear values (+/- SD, mu m) were: group A 6.84 +/- 1.72 and group B 5.38 +/- 1.21 (p = 0.04). The mean %SMHC values (+/- SD) were: group A 54.6 +/- 16.2 and group B 45.7 +/- 6.8 (p = 0.04). Fluoride dentifrice had a protective effect on eroded enamel subjected to brushing abrasion. Copyright (c) 2007 S. Karger AG, Basel.

Relax and fix heuristics to solve one-stage one-machine lot-scheduling models for small-scale soft drink plants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioremediation of direct dyes in simulated textile effluents by a paramorphogenic form of Aspergillus oryzae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chest associated to motor physiotherapy acutely improves oxygen saturation, heart rate and respiratory rate in premature newborns with periventricular-intraventricular hemorrhage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Review on the Challenges for Increased Production of Castor

Castor (Ricinus communis L.) is one of the oldest cultivated crops, but currently it represents only 0.15% of the vegetable oil produced in the world. Castor oil is of continuing importance to the global specialty chemical industry because it is the only commercial source of a hydroxylated fatty acid. Castor also has tremendous future potential as an industrial oilseed crop because of its high seed oil content (more than 480 g kg(-1)), unique fatty acid composition (900 g kg(-1) of ricinoleic acid), potentially high oil yields (1250-2500 L ha(-1)), and ability to be grown under drought and saline conditions. The scientific literature on castor has been generated by a relatively small global community of researchers over the past century. Much of this work was published in dozens of languages in journals that are not easily accessible to the scientific community. This review was conducted to provide a compilation of the most relevant historic research information and define the tremendous future potential of castor. The article was prepared by a group of 22 scientists from 16 institutions and eight countries. Topics discussed in this review include: (i) germplasm, genetics, breeding, biotic stresses, genome sequencing, and biotechnology; (ii) agronomic production practices, diseases, and abiotic stresses; (iii) management and reduction of toxins for the use of castor meal as both an animal feed and an organic fertilizer; (iv) future industrial uses of castor including renewable fuels; (v) world production, consumption, and prices; and (vi) potential and challenges for increased castor production.

Survey of the Microbiological Quality of Nonalcoholic Carbonated Beverages

The number and the main groups of microorganisms present in samples of different nonalcoholic carbonated beverages (lemon, orange and guaraná soft drinks) obtained from a small factory were analyzed. The samples were obtained at the end of the processing line. They were then divided into two lots: one was sent to immediate analysis, the other was stored at environmental temperature for 90 d thereafter it was submitted to the same analysis. Aliquots of 1 mL were drawn from the various samples and the corresponding decimal dilutions were prepared. They were then grown in culture media and counts of mesophilic aerobic bacteria, molds and yeasts, acid-producing bacteria, total and fecal coliforms were taken. It was observed that, of all the analyzed samples, at time 0 or after storage sample C (orange) was the best, since it conformed to the microbiological standards established by legislation. The guaraná type could also be consumed on day zero; the lemon type was inadequate for consumption of all the analyzed samples, the orange type was the only one that could be consumed within 3 months of storage.

Teaching in the community: Changing and implementing a new curriculum

The Faculdade de Medicina de Botucatu is changing to, and implementing a new curriculum aimed at integrating teaching and learning in the community. Emphasis is on preparing the community settings for teaching, learning and providing health care. A particular task is staff development with emphasis on problem-based learning (PBL) and training medical and nursing students in the leadership to participate in this process. The new curriculum includes the gradual introduction of clinical practice during First Year, integration of the basic sciences with clinical sciences, through integrated modules studied in small groups, and maintenance of the two year clerkship. The undergraduates are introduced gradually to the community: 8% of the total curriculum during First Year, 10% during Second Year, 10% during Third Year, 20% during Fourth Year, 30% during Fifth and Sixth Years. The basic health units at primary care level, and the regional specialty outpatients and hospitals at the second level, are the main teaching sites. An Education Development Committee was established to discuss the strategies for supporting the changes and to structure the planning for promoting the gradual transformation of staff development. After 18 months of implementation of the curriculum, there followed discussions and monitoring of the objectives of changes in medical education at our school. Successful implementation of the new curriculum would fail, if the objectives were not absorbed by every member of the implementation Committee.

A theoretical and experimental analysis of cold-formed steel shapes subjected to bending - Channel and simple lipped channel

Cold-formed steel shapes have been widely employed in steel construction, where they frequently offer a lower cost solution than do traditional laminated shapes. A classic application of cold-formed steel shapes is purlins in the roof panel of industrial buildings, connected to the roof panel by means of screws. The combined effect of these two elements has been the subject of investigations in some countries. Design criteria were included in the AISI Code in 1991 and 1996. This paper presents and discusses the results obtained from bending tests carried out on shapes commonly used in Brazil, i.e., the channel and the simple lipped channel, Tests were carried out on double shapes with 4.5 and 6.0 meter spans, which were subjected to concentrated loads and braced against each other on the supports and at intermediary points in three different load situations. The panel shape was also analyzed experimentally, simulating the action of wind by means of a vacuum box designed specifically for this purpose. The test results were then compared to those obtained through the theoretical analysis, enabling us to extract important information upon which to base proposed design criteria for the new Brazilian code.

Apoptose em otorrinolaringologia e cabeça e pescoço

This paper intend to review recent advances in our understanding of programmed cell death, or apoptosis, and discuss implications of these basic science advances in the development of causes and potential treatments of a variety of diseases of the head and neck. Conclusions: apoptosis is now understood to be important in the normal development and survival of all multicellular organism. Deregulation of this normally tighly controlled process underlies a variety of disease states, including neoplasia, autoimmune disease, and disorders of the central nervous system. A better understanding of this process and regulation may help otolaryngologists better understand diseases relevant to this specialty and will lead to improved therapeutic interventions.

Perfil da atividade de pesquisa publicada nos anais dos congressos brasileiros de pneumologia e tisiologia nos últimos vinte anos

Objective: To increase the knowledge base regarding pulmonology research in Brazil. Methods: A retrospective, observational study of the abstracts published in the Annals of the Brazilian Pulmonology and Phthisiology Conferences held from 1986 to 2004, quantifying the institutions of origin by geographic distribution and type, as well as categorizing the abstracts by study design and topic. Results: A total of 6467 abstracts were published. The institutions of origin were located, variously, in the Southeast (3870 abstracts), South (1309), Northeast (783), Central-West (267) and North (84). There were 94 abstracts originating from foreign institutions, especially from institutions in Portugal (56.3%) and the United States (13.8%). Most of the studies (5825) were conducted in public Brazilian institutions. There were 4234 clinical studies, 1994 case reports and 239 original research articles. A marked, progressive increase was observed in the number of clinical studies and case reports during the period evaluated. Overall, the most common themes were tuberculosis and other infections diseases (25.2%), following by oncology (11.6%), interstitial lung diseases (8.8%) and thoracic surgery (8.5%). Nevertheless, the number of abstracts on each topic varied widely from year to year. Conclusion: Public Brazilian institutions are the principal sources of pulmonology research in Brazil. Such research activity is concentrated in the southeastern part of the country. Case reports account for one-third of this activity. Although there was great variability in the subjects addressed, diseases that are highly prevalent in Brazil, such as tuberculosis and other infections diseases, were the most common topics.

Distortional buckling of simple lipped channel in bending results of the experimental analysis versus direct strength methods

Cold-formed steel members are subject to failure caused by buckling, normally under loads smaller than those corresponding to partial or total yielding of the cross section. The buckling of members in bending can be classified as local or global, and the occurrence of one or the other type is expected by the members' geometric characteristics and by the constraints and load conditions. One of the local instability modes that can characterize a member's failure is distortional buckling of the cross section occurring on its own plane and involving lateral displacements and rotations. This paper presents and discusses the procedures and results obtained from experimental tests of cold-formed steel members under bending. Forty-eight beams were carried out on members in simple lipped channel, in pairs, with 6-meter spans and loads applied by concentrated forces at every 1/3 of the span. The thickness, width and dimensions, of the stiffeners were chosen so that the instability by distortion buckling of the cross section was the principal failure mode expected. The experimental results are compared with the obtained results by using the direct strength method.

Fluoride concentrations in industrialized beverages consumed by children in the City of Bauru, Brazil

The increasing consumption of juices, soft drinks and teas among children has increased significantly fluoride ingestion at the age range of risk for development of dental fluorosis. Objective: The purpose of this study was to evaluate fluoride concentrations in some brands of industrialized beverages consumed by children in the city of Bauru, SP, Brazil. Material and Methods: 98 brands of beverages were analyzed, divided into 3 lots, comprising 36, 32 and 30 brands, respectively, for the first, second and third lots. Fluoride concentrations were determined by HMDS-facilitated diffusion, using a fluoride ion-specific electrode (Orion 9409). Results: Fluoride concentrations ranged between 0.04 and 1.76 μg F/mL. It was observed a wide variation in fluoride concentrations among the different brands, as well as the different lots of the same brand. There was no information on fluoride concentrations on the labels of any product. Conclusions: Some of the products analyzed could contribute significantly to the total fluoride intake and, thus, be important risk factors for development of dental fluorosis, which indicates the need of controlling the production of these beverages with respect to fluoride concentration.

Razão de prevalências: Alcoolismo nas diferentes regiões geográficas do Brasil segundo o sexo

The present study applies a method of prevalence analysis to data obtained in two nationwide household surveys on alcohol use during life and dependence, for each of the sexes. The ratios of prevalences (R), for the lifetime alcohol use and dependence rates, between the two genders in the various Brazilian macro-regions, were calculated together with their respective 95% confidence intervals. It was found that lifetime use, both in 2001 and in 2005, was significantly greater in Brazilian males in all geographical regions. In 2001, the population of the North (male and female) had a higher rate of alcohol consumption than that in the Brazilian population as a whole and that in the Southeast. Dependence on the consumption of alcoholic drinks in 2001 and in 2005 was greater in the male sex, but similar among the various regions studied. It can be concluded that this method of analyzing the data on alcoholism could be of great use in assessing its magnitude and importance in terms of public health.

Meta-heuristic approaches for a soft drink industry problem

The present paper evaluates meta-heuristic approaches to solve a soft drink industry problem. This problem is motivated by a real situation found in soft drink companies, where the lot sizing and scheduling of raw materials in tanks and products in lines must be simultaneously determined. Tabu search, threshold accepting and genetic algorithms are used as procedures to solve the problem at hand. The methods are evaluated with a set of instance already available for this problem. This paper also proposes a new set of complex instances. The computational results comparing these approaches are reported. © 2008 IEEE.

Valores Referenciais para Procedimentos Odontológicos (VRPO) em Ortodontia

Introduction: The cost of orthodontic treatment is a very important issue. The aim of this study was to analyze the current Indicative Values for Dental Procedures (IVDP) for orthodontic procedures. Methods: Laws, dental entities papers and scientific literature were utilized. Results: Laws are too general and only offer abstract parameters when define remunerations. Current IVDP vary in the same State, according to the consultant entity. Dental entities interpret that general clinicians can practice Corrective Orthodontics, but new scientific studies begin to question this understanding. The Brazilian Association of Orthodontics and Dentofacial Orthopedics (ABOR) suggests that IVDP for orthodontic specialty must be formulated. Conclusion: Current IVDP are not standardized and are below the correct values for orthodontic procedures, because they are the mean of general clinicians and orthodontists remunerations; and ABOR is legally and ethically supported to claim specific IVDP for orthodontic specialty.