Trocas gasosas e eficiência fotoquímica de cultivares de algodoeiro herbáceo sob aplicação de silício foliar

The objective of this study was to evaluate gas exchange and photochemical efficiency of cotton cultivars under leaf application of silicon. Therefore, the experiment was conducted in a completely randomized in a factorial 3 x 5, three cotton cultivars ('BRS Topazio', 'BRS Safira' and 'BRS Rubi'), five silicon concentrations (0, 50, 100, 150, 200 mg L-1) and four replications. Gas exchange and photochemical efficiency were determined by measuring the rate of CO2 assimilation, transpiration, stomatal conductance, internal CO2 concentration, instantaneous efficiency in water use, instantaneous carboxylation efficiency, initial fluorescence, maximum quantum efficiency of the variable and photosystem II (PSII). The data variables were subjected to analysis of variance and regression test comparison of means. There were significant differences in gas exchange and photochemical efficiency in response to concentrations of silicon. There were also significant differences among cotton cultivars evaluated. In cultivar 'BRS Top zio', the application of silicon increased CO2 assimilation rate and quantum efficiency of PSII. In 'BRS Safira' silicon reduced the rate of assimilation and internal CO2 concentration. In 'BRS Rubi' element increased the fluorescence of chlorophyll 'a' and quantum efficiency of photosystem II, and reduced the rate of assimilation and internal CO2 concentration and stomatal conductance. Silicate fertilization provided 'BRS Topazio' to express better photosynthetic rate in relation to 'BRS Safira' and 'BRS Rubi'. No damage occurred in PSII when 'BRS Top zio', 'BRS Safira' and 'BRS Rubi' cultivars received silicon as supplementary nutrition.

Preparação de substratos de carbeto de silício para fins aeroespaciais

This conclusion thesis has the objective of produce substrates of Silicon Carbide from the powder of SiC for aerospace use. The powder of SiC was pressed in cylindrical form by the process called “wet way”. For the inicial pressing process was used a uniaxial squeezer and after that was used a isostatic squeezer, after that the samples were synthesized. The next step was the machining and polishing to improve the features of the surface of the sample. Then the roughness was measured, as also the Arquimedes method and optical microscopy and scanning eletron microscopy. Some innovations were done, in one of the lots little vacancys were done with organic material or silicon to reduce the weight of the sample; and the other innovation were the use of a slip film of SiC on the surface of the sample, that were after synthesized with LASER to reduce the roughness, in this samples the roughness were reduce in 50 % if compared with the other samples

Lixamento do Pinus elliotti com carbeto de silício e óxido de aluminio

The Sanding is a complex process involving many variables that affect the quality of the part produced, working mainly in the timber industry in the production of panels (MDF, MDP, HDF, etc...) and furniture. However, these industries use the sanding process empirically, not optimizing it. The aim of this study was to compare the behavior of sandpaper white aluminum oxide (OA-white) and Black silicon carbide (SiC-black), analyzing variables in the process as: strength, power, emission, vibration, wear particle size of sanding, and its consequences on the surface finish of the workpiece. Made the process of plane grinding samples of Pinus elliottii, processed in parallel to the fibers, which were sanded with sandpaper grain OA white and black 3-SiC abrasive conditions (new, moderately eroded and severely eroded) grain sizes in 3 (80, 100, and 120 mesh). 6 replicates was performed for each condition tested. Each trial was captured output variables of the sanding process: strength, power, emission and vibration. With two stages totaling 108 trials. After the sanded samples, it has the same surface quality by raising the surface roughness Ra. Through experiment, it can be concluded that abrasives OA-white tended to have higher strength, power, emissions and less vibration in the sanding process, compared to the SiC-black. However, surface finish exhibited similar to the particle size of 80 to 100 mesh, worn abrasive conditions. However, the particle size of 120 mesh, obtained by the roughness of sandpaper OA-bank was higher compared to SiC-black to all conditions of sandpaper due to its toughness

Resposta da soqueira da cana-de-açúcar à aplicação de nitrogênio na ausência e na presença de silício

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Interação silício e alumínio em plantas de arroz de terras altas e mamona

Pós-graduação em Agronomia (Agricultura) - FCA

Adubação com silício e tolerância ao déficit hídrico em cana-de-açúcar

Pós-graduação em Agronomia (Agricultura) - FCA

Contribuição ao estudo do desgaste de bedames na usinagem de ligas de alumínio-silício

Pós-graduação em Engenharia Mecânica - FEIS

Resposta da terceira soqueira da cana-de-açúcar à aplicação de nitrogênio na presença e ausência de silício

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Acúmulo de massa seca na soja em resposta a aplicação foliar com silício sob condições de déficit hídrico

The foliar fertilization with silicon has promoted several actions beneficial to plants, among them is greater drought tolerance, however, for the soybean, there is little information on these benefits in this condition. Thus, the aim of this study was to evaluate the effect of silicon on leaf, the dry matter accumulation of soybean in their reproductive stages, where the crop water stress suffered during the same. The experiment was carried out at the Plant Science Unit Aquidauana University - State University of Mato Grosso do Sul. The statistical design was a randomized block split plot with four replications. The plots were represented by cultivar 5DR615, the subplots consisted of the application (with or without) silicon, whose source was used KSi. Was measured the height and identified the development stage of all plants, separating them into stem + branches, leaves + petioles, pods capsules and seed. Foliar applications of silicon increased dry matter accumulation during the reproductive stage of soybean, where the highest values occurred in the R6 stage. Under conditions of water deficit, foliar application of silicon on soybean provided normal plant development, generating greater dry mass of stem + branches, leaves + petioles, pods capsules and seeds throughout their reproductive phase, with the highest values obtained at R6 stage (35 days after R2).

Dinâmica populacional de insetos fitófagos e predadores em cana-de-açúcar sob aplicação de silício

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Relação amônio e nitrato, mitigação da toxicidade amoniacal com silício e curva de acúmulo de nutrientes em mudas de maracujazeiro

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Silício e amônio na nutrição e no crescimento de brássicas

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Índice de clorofila em plantas de arroz de terras altas submetidas a estresse por alumínio e aplicação de silício

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Filossilicatos: efeitos no crescimento e na nutrição de plantas de milho e no teor de silício do solo

Importance of silicon fertilization is related to the benefits that silicon is able to promote tolerance to heavy metals, reduce the incidence of pests and diseases, increased productivity, drought tolerance, among others. The objective of this study was to evaluate the phyllosilicates effect on biomass formation, nutrients and silicon on the early stages of corn plants compared to wollastonite. Experiment was installed and conducted in a greenhouse located at the Universidade Estadual Paulista, UNESP, in Registro, SP. Consisting of 10 treatments established in a randomized block design in scheme factorial (2 x 5), with five replications. First factor corresponds to the two types of soil (Oxisol and Ultisol) and the second factor, five treatments (control, 0 kg ha-1 Si; wollastonite W13, 13 kg ha-1 Si; wollastonite W26, 26 kg ha-1 Si; phyllosilicates F13, 13 kg ha-1 Si; phyllosilicates F26, 26 kg ha-1 Si). In Ultisol, phyllosilicates increased production of fresh, dry biomass and silicon content in shoots of corn compared to treatment with wollastonite and control. Highest Si content compared to control (6.2 g kg-1) was obtained with 13 kg ha-1 Si of phyllosilicates (9.8 g kg-1). The greatest accumulation mass and Si in plants by applying phyllosilicates were observed in Ultisol, although this display Si content higher than Oxisol.