Persistence of endodontic methacrylate-based cement residues on dentin adhesive surface treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of methacrylate-based cement residues on the dentin, after dentin surface cleaning with ethanol or acetone, with or without previous application of a dentin adhesive. Forty bovine crown fragments were obtained and the dentin surface was washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% ethylenediaminetetraacetic acid application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. In 20 specimens, previously to cement, a dentin adhesive was applied in all surfaces. After 15 min, the surface was scrubbed with a cotton pellet and moistened with ethanol or acetone, compounding the following groups: G199.5% ethanol and G2acetone, without previous use of dentin adhesive; G399.5% ethanol and G4acetone, with previous use of dentin adhesive. The dentin surface was scrubbed until the cement residues could not be visually detected. Sections were then processed for scanning electron microscopy and evaluated at 500x magnification and scores were attributed to each image according to the area covered by residual sealer, and data were subjected to KruskalWallis at 5% significance. The lower residue presence was observed in G3 (P = 0.005). All surface presented cement residues when acetone was used as cleaning solution (P = 0.0005). The cleaning solutions were unable to completely remove the cement residues from both surfaces. The ethanol used after previous application of the dentin adhesive promoted the lower presence of residues.

Persistence of resinous cement residues in dentin treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of resin cement residues after dentin surface cleaning with different alcohol-based solutions or an essential oil (eucalyptol). Forty bovine teeth were sectioned in order to expose pulp chamber dentin to be washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% EDTA application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. After 15 min, the surface was scrubbed with a cotton pellet and moistened with different dentin cleaning solutions, compounding the following groups: G195% ethanol, G270% ethanol, G370% isopropyl alcohol, or G4eucalyptol. The dentin was scrubbed until the cement residues could not be visually detected. Sections were then processed for SEM and evaluated at x 500 magnification. Scores were attributed to each image according to the area covered by residual sealer, and data were subjected to KruskalWallis at 5% significance. Eucalyptol promoted the most adequate dentin cleaning, although no statistical difference was detected amongst the groups (P > 0.05), except between the eucalyptol and 70% ethanol groups (P < 0.05). All the evaluated dentin cleaning solutions were unable to completely remove the cement residues from the dentin surface. Microsc. Res. Tech., 2012. (C) 2012 Wiley Periodicals, Inc.

Ultrastructural analysis of the fat body in workers of Attini ants (Hymenoptera: Formicidae)

In the present study a comparative morphological analysis of the fat body cells of ant workers of the basal Attini species Cyphomyrmex rimosus and Mycetarotesparallelus, and the derived species Acromynnex disciger and Atta laevigata was conducted. The results revealed that the fat body is located mainly in the abdomen around organs (perivisceral) and near the integument (parietal). The main cells observed are spherical or polygonal trophocytes with a slightly rough surface. The oenocytes, another cell type found, are closely associated with trophocytes, and present a spherical or polygonal shape and a smoother surface. The morphometric analysis showed that the area of trophocytes and oenocytes of C rimosus and M parallelus is significantly smaller when compared to those of A. disciger and A. laevigata. In the cytoplasm of parietal and perivisceral trophocytes and oenocytes, electronlucent droplets (probably lipids) and electrondense granules (probably proteins) indicate the participation of these cells in the storage of these elements, while digestive vacuoles, residual bodies, and multivesicular bodies suggest a role in intracellular digestion. In perivisceral trophocytes and oenocytes of C rimosus, the presence of mitochondria, lamellar rough endoplasmic reticulum, and Golgi complex suggests that these cells synthesize proteins. Based on these data, no significant differences were observed between the fat body cells of basal and derived ants, except regarding the larger size of trophocytes and oenocytes of the derived species A. disciger and A. laevigata. (C) Koninklijke Brill NV, Leiden, 2009

Radon in groundwater contaminated by dissolved hydrocarbons in Santa Barbara d'Oeste, São Paulo State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Electrochemical Determination of Inorganic Contaminants in Automotive Fuels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de lodo da estação de tratamento de água em solo degradado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estatísticas de avaliação da precisão experimental em ensaios de cultivares de milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Compensatory lung growth in autologus lobar implant after pneumonectomy in dogs

OBJETIVO: Avaliar se existe crescimento compensatório pulmonar em transplante lobar e verificar se este crescimento é semelhante ao que ocorre após lobectomia. MÉTODOS: Foram utilizados 48 cães, distribuídos em 3 grupos (G1=controle, G2=lobectomia cranial esquerda e G3=pneumonectomia com reimplante do lobo caudal esquerdo). Após 5 meses da cirurgia, os animais foram submetidos à cintilografia pulmonar e a seguir sacrificados para estudo morfométrico pulmonar. RESULTADOS: Os resultados mostraram que não existe correlação da cintilografia nem com a massa nem com o volume do pulmão. Houve crescimento compensatório em massa e volume residual nos dois grupos operados, tanto no pulmão contralateral como no ipsilateral à cirurgia, não existindo até os 5 meses de estudo compensação em capacidade pulmonar total, nem em complacência pulmonar no lobo caudal remanescente do G2 e no lobo caudal reimplantado do G3, havendo maior prejuízo para o lobo reimplantado. Como estudos prévios mostram que o crescimento compensatório pulmonar se inicia com aumento da massa e do volume residual, e que a complacência é compensada posteriormente, este estudo parece ter documentado o início do crescimento compensatório, sendo a complacência pulmonar o fator limitante do crescimento compensatório após 5 meses de estudo. CONCLUSÃO: Conclui-se que existe crescimento compensatório tanto no lobo reimplantado como no pulmão contralateral, mas a complacência ainda encontra-se reduzida. O crescimento compensatório foi semelhante nos dois grupos, mas a complacência do lobo implantado está mais prejudicada.

Respostas do híbrido de sorgo-sudão às adubações nitrogenada e potássica: características estruturais e produtivas

A pesquisa foi instalada no Setor de Forragicultura da FCAV/UNESP-Jaboticabal, para avaliar o híbrido de sorgo-sudão AG 2501C no outono e inverno. O manejo da pastagem foi conduzido, simulando o sistema de lotação intermitente. O experimento foi desenvolvido de março a setembro de 2002. A forrageira foi submetida a nove tratamentos: três doses de N (100, 200 e 300 kg/ha) e três doses de K (0, 80 e 160 kg/ha de K2O), em delineamento experimental de blocos casualizados com três repetições em esquema de parcelas subdivididas. As características estudadas foram massas, secas, inicial de planta inteira, folha e colmo e massa seca residual; relação lâmina/colmo; índice de área foliar (IAF); interceptação da radiação fotossinteticamente ativa (RFA) e coeficiente de extinção luminosa. Os tratamentos não influenciaram a massa seca inicial (MSI) e residual (MSR) da planta inteira, folha e colmo e massa seca residual. Os resultados médios para MSI, MSR, folha e colmo foram 2801,2; 964,7; 1462,8 e 1085,2 kg/ha de MS, por ciclo de pastejo, respectivamente. Houve redução da relação lâmina/colmo e da porcentagem de folhas, enquanto a porcentagem de colmos aumentou. Houve interação entre N e K para IAF, interceptação de luz e coeficiente de extinção.

Feed efficiency of Nellore cattle selected for postweaning weight

Foram comparados dois rebanhos Nelore, um selecionado para maior peso pós-desmame e outro controle, selecionado para a média de peso pós-desmame, para avaliar os efeitos de 29 anos de seleção sobre a eficiência alimentar. Sessenta machos Nelore com 205 kg e 267 dias de idade (41 selecionados e 19 controle), foram avaliados em baias individuais durante a prova de ganho de peso. O desempenho e o consumo de matéria seca foram utilizados para determinar as seguintes medidas de eficiência: conversão alimentar; consumo alimentar residual; ganho residual; eficiência parcial de crescimento; taxa de crescimento relativo; e taxa de Kleiber. Após o período experimental de 112 dias, os animais controle apresentaram menor peso vivo final em comparação aos selecionados, contudo, não diferiram quanto ao consumo de matéria seca (% do peso vivo), à área de olho-de-lombo e às espessuras de gordura subcutânea na altura da 12ª costela e na região da picanha. O consumo de matéria seca (kg/dia) e o ganho médio diário dos animais selecionados foram, respectivamente, 19,4 e 26,4% superiores aos dos controle. O maior ganho médio diário dos animais selecionados promoveu melhora significativa, em torno de 6%, na conversão alimentar; 70 g/dia no ganho residual; e de 17% na taxa de Kleiber. As demais medidas de eficiência (consumo alimentar residual, eficiência parcial de crescimento e taxa de crescimento relativo) não diferiram entre os rebanhos. Os 29 anos de seleção para peso pós-desmame não afetaram a eficiência alimentar de bovinos Nelore.

Production of transgalactosylated oligosaccharides (TOS) by galactosyltransferase activity from Penicillium simplicissimum

Ingestion of transgalactosylated oligosaccharides (TOS) and other non-digestible oligosaccharides (NDOs) induces a significant increase in Bifidobacterium, Lactobacillus and some desirable species of Streptococcus populations in the gut of human and other animals (prebiotic effect). This change in the intestinal flora is responsible for several beneficial physiological effects such as a decrease of putrefactive products in the feces, lower blood cholesterol content, higher Ca2+ absorption, a smaller loss of bone tissue in ovariotomized female rats and a lower incidence of colon cancer. beta-Galactosidase from Penicillium simplicissimum, a strain isolated from soil, showed high galactosyltransferase activity when incubated with a highly concentrated lactose solution. Optimum pH and temperature ranges for hydrolytic activity were 4.0-4.6 and 55-60 degrees C, respectively, for a lactose concentration of 5.0% (w/v). Maximal galactosyltransferase activity was obtained at pH 6.5 and 50 degrees C and TOS synthesis was positively associated with lactose concentration in the reaction medium. Thus, when 50 ml of a 60% (w/v) lactose solution was incubated with 26.6 U of beta-galactosidase under the best pH and temperature conditions for transferase activity, a final product with 30.5% TOS (183 mg ml(-1)), 27.5% residual lactose and 42.0% monosaccharides was obtained. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

TOXIC DILATATION OF THE COLON IN CHAGAS-DISEASE

Toxic megacolon occurs in colitis of differing aetiology. This report describes 15 patients with chagasic megacolon with this complication. The clinical signs and symptoms in all patients were pain and progressive abdominal distension accompanied by fever, severe toxaemia and shock. Seven patients developed this clinical pattern after manual removal of faeces. The remaining patients had pain and abdominal distension followed by signs of severe toxaemia when first examined. Nine patients underwent total colectomy with ileostomy (one death), four partial colectomy (all died) and two received medical treatment (both died). At autopsy, three of the four patients undergoing partial colectomy had residual colitis and enteritis. The surgical procedure of choice for this complication of chagasic megacolon is total colectomy.

Correction procedure applied to a single real transformation matrix -Untransposed three-phase transmission line cases

Clarke's matrix has been used as an eigenvector matrix for transposed three-phase transmission lines and it can be applied as a phase-mode transformation matrix for transposed cases. Considering untransposed three-phase transmission lines, Clarke's matrix is not an exact eigenvector matrix. In this case, the errors related to the diagonal elements of the Z and Y matrices can be considered negligible, if these diagonal elements are compared to the exact elements in domain mode. The mentioned comparisons are performed based on the error and frequency scan analyses. From these analyses and considering untransposed asymmetrical three-phase transmission lines, a correction procedure is determined searching for better results from the Clarke's matrix use as a phase-mode transformation matrix. Using the Clarke's matrix, the relative errors of the eigenvalue matrix elements can be considered negligible and the relative values of the off-diagonal elements are significant. Applying the corrected transformation matrices, the relative values of the off-diagonal elements are decreased. The comparisons among the results of these analyses show that the homopolar mode is more sensitive to the frequency influence than the two other modes related to three-phase lines. © 2006 IEEE.

Identification of structural parameters for active vibration control

The study of algorithms for active vibration control in flexible structures became an area of enormous interest for some researchers due to the innumerable requirements for better performance in mechanical systems, as for instance, aircrafts and aerospace structures. Intelligent systems, constituted for a base structure with sensors and actuators connected, are capable to guarantee the demanded conditions, through the application of diverse types of controllers. For the project of active controllers it is necessary, in general, to know a mathematical model that enable the representation in the space of states, preferential in modal coordinates to permit the truncation of the system and reduction in the order of the controllers. For practical applications of engineering, some mathematical models based in discrete-time systems cannot represent the physical problem, therefore, techniques of identification of system parameters must be used. The techniques of identification of parameters determine the unknown values through the manipulation of the input (disturbance) and output (response) signals of the system. Recently, some methods have been proposed to solve identification problems although, none of them can be considered as being universally appropriate to all the situations. This paper is addressed to an application of linear quadratic regulator controller in a structure where the damping, stiffness and mass matrices were identified through Chebyshev's polynomial functions.

Grinding of hardened steels using optimized cooling

Grinding - the final machining process of a workpiece - requires large amounts of cutting fluids for the lubrication, cooling and removal of chips. These fluids are highly aggressive to the environment. With the technological advances of recent years, the worldwide trend is to produce increasingly sophisticated components with very strict geometric and dimensional tolerances, good surface finish, at low costs, and particularly without damaging the environment. The latter requirement can be achieved by recycling cutting fluids, which is a costly solution, or by drastically reducing the amount of cutting fluids employed in the grinding process. This alternative was investigated here by varying the plunge velocity in the plunge cylindrical grinding of ABNT D6 steel, rationalizing the application of two cutting fluids and using a superabrasive CBN (cubic boron nitride) grinding wheel with vitrified binder to evaluate the output parameters of tangential cutting force, acoustic emission, roughness, roundness, tool wear, residual stress and surface integrity, using scanning electron microscopy (SEM) to examine the test specimens. The performance of the cutting fluid, grinding wheel and plunge velocity were analyzed to identify the best machining conditions which allowed for a reduction of the cutting fluid volume, reducing the machining time without impairing the geometric and dimensional parameters, and the surface finish and integrity of the machined components.