Effect of drying on the reproducibility of DIAGNOdent to detect caries-like lesions

The aim of this study was to verify the drying effect on the reproducibility of DIAGNOdent (Dd) devices to detect caries-like lesions. Three areas were created in each of the 34 bovine incisors: sound (S), demineralized (DE) and remineralized (RE). One examiner measured each area with two Dd devices (denominated X and Y), twice under humid, and twice under dry condition. Intra-rater agreement according each device and inter-device agreement were estimated by kappa statistics (κ). Intra-rater agreement for device Y was substantial under humid (κ DE=0.68 and κ RE+S=0.68) and dry condition (κ DE=0.64 and κ RE+S=0.67). For device X, it was substantial under humid condition (κ DE=0.57 and κ RE+S=0.49), and it was almost perfect after air drying (κ DE=1.0 and κRE+S=1.0). Inter-device agreement was slight (κ =0.17) under humid condition, and it was substantial under dry condition (κ =0.62). As reproducibility increased under dry condition, drying is advised to detect caries-like lesions on free smooth surfaces when different devices are used.

Effect of hydrofluoric acid etching duration on the roughness and flexural strength of a lithium disilicate-based glass ceramic

The aim of this study was to examine the effect of different acid etching times on the surface roughness and flexural strength of a lithium disilicate-based glass ceramic. Ceramic bar-shaped specimens (16 mm x 2 mm x 2 mm) were produced from ceramic blocks. All specimens were polished and sonically cleaned in distilled water. Specimens were randomly divided into 5 groups (n=15). Group A (control) no treatment. Groups B-E were etched with 4.9% hydrofluoric acid (HF) for 4 different etching periods: 20 s, 60 s, 90 s and 180 s, respectively. Etched surfaces were observed under scanning electron microscopy. Surface profilometry was used to examine the roughness of the etched ceramic surfaces, and the specimens were loaded to failure using a 3-point bending test to determine the flexural strength. Data were analyzed using one-way ANOVA and Tukey's test (α=0.05). All etching periods produced significantly rougher surfaces than the control group (p<0.05). Roughness values increased with the increase of the etching time. The mean flexural strength values were (MPa): A=417 ± 55; B=367 ± 68; C=363 ± 84; D=329 ± 70; and E=314 ± 62. HF etching significantly reduced the mean flexural strength as the etching time increased (p=0.003). In conclusion, the findings of this study showed that the increase of HF etching time affected the surface roughness and the flexural strength of a lithium disilicate-based glass ceramic, confirming the study hypothesis.

Experimental hyperthyroidism decreases gene expression and serum levels of adipokines in obesity

Aims. To analyze the influence of hyperthyroidism on the gene expression and serum concentration of leptin, resistin, and adiponectin in obese animals. Main Methods. Male Wistar rats were randomly divided into two groups: control (C)fed with commercial chow ad libitumand obese (OB)fed with a hypercaloric diet. After group characterization, the OB rats continued receiving a hypercaloric diet and were randomized into two groups: obese animals (OB) and obese with 25g triiodothyronine (T3)/100BW (OT). The T3 dose was administered every day for the last 2 weeks of the study. After 30 weeks the animals were euthanized. Samples of blood and adipose tissue were collected for biochemical and hormonal analyses as well as gene expression of leptin, resistin, and adiponectin. Results. T3 treatment was effective, increasing fT3 levels and decreasing fT4 and TSH serum concentration. Administration of T3 promotes weight loss, decreases all fat deposits, and diminishes serum levels of leptin, resistin, and adiponectin by reducing their gene expression. Conclusions. Our results suggest that T3 modulate serum and gene expression levels of leptin, resistin, and adiponectin in experimental model of obesity, providing new insights regarding the relationship between T3 and adipokines in obesity. Copyright © 2012 Renata de Azevedo Melo Luvizotto et al.

Estrogen receptors alpha and beta in male and female gerbil prostates

The Mongolian gerbil (Meriones unguiculatus, Gerbilinae: Muridae) is useful for prostate studies, because both males and females spontaneously develop prostatic disorders with age. Estrogens regulate prostate homeostasis via two estrogen receptors, ER alpha (ESR1) and ER beta (ESR2), but the cellular distribution and regulation of these receptors in the gerbil prostate has not been described. Both receptors were localized by immunohistochemistry in the ventral prostate of intact male and female gerbils, in males 7 and 21 days after castration, and in females treated with testosterone for 7 and 21 days. In male and female adult gerbils, ER alpha was detected mainly in prostatic stromal cells, whereas ER beta was present mostly in secretory and basal cells. More ER alpha-positive stromal cells were found in females than in males, as was a reduction toward the male value in females treated with testosterone. Castration did not alter ER alpha expression. Testosterone was necessary for maintenance of ER beta in the male prostate epithelium: ER beta expression declined markedly in prostates of males older than 1 yr, and castration of 4-mo-old males caused a reduction in ER beta to levels seen in 1-yr-old males. Because ER beta is an antiproliferative receptor, its loss with age may predispose the aging gerbil to proliferative diseases of the prostate. © 2013 by the Society for the Study of Reproduction, Inc.

Micro-CT assessment of two different endodontic preparation systems

The aim of this study was to compare two endodontic preparation systems using micro-CT analysis. Twenty-four one-rooted mandibular premolars were selected and randomly assigned to two groups. The samples (n = 12) of Group 1 were prepared using the ProTaper Universal rotary system, while Group 2 (n = 12) was prepared using the EndoEZE AET system complemented by manual apical preparation with K-type hand files up to #30. A 2.5% sodium hypochlorite solution was used in both groups for irrigating. Both groups were scanned by highresolution microcomputed tomography before and after preparation (SkyScan 1172, SkyScan, Kontich, Belgium). The root canal volume and surface area was measured before and after preparation, and the differences were calculated and analyzed for statistically significant differences using ANOVA complemented by the Tukey test (p < 0.05). The results showed no statistically significant differences between the mean volumes of dentin removal by the two systems. However, the EndoEZE AET system presented a significantly greater mean surface area compared to the ProTaper system (p < 0.05). The EndoEZE AET system enabled preparation of a greater root canal surface area when compared to the ProTaper Universal system. There seemed to be no difference in dentin volume loss between the two systems used.

Bond strength of adhesive systems with different solvents to dry and wet dentin

Aim: This study evaluates bond strength between dentin and composite using adhesives with different solvents to dry and wet dentin. Materials and methods: Ninety bovine incisors were used; the vestibular surfaces were worn by the exposure of an area with a diameter of 4 mm of dentin. The specimens were divided into 6 groups, according to the type of adhesive used and hydratation stals: Group SB-wet: Single Bond 2 in wet dentin, Group SBdry: Single Bond 2 in dry dentin, Group SL-wet: Solobond M in wet dentin, Group SL-dry: Solobond M in dentin dry. Group XPwet: XP Bond in wet dentin, Group XP-dry: XP Bond in dentin dry. They were cut to obtain specimens in the shape of stick with 1 × 1 mm and subjected to microtensile test in universal testing machine with a cross speed of 1mm/min. The data were analyzed with ANOVA and Tukey's tests (5%). Results: ANOVA showed significant differences for surface treatment and interaction, but no difference was found for adhesive factor. The Tukey's test showed that the samples with wet dentin shown higher values of bond strength. Conclusion: The adhesive did not influence in the bond strength. The groups with wet dentin showed higher values of bond strength than groups with dry dentin.

Influence of CVD diamond tips and Er:YAG laser irradiation on bonding of different adhesive systems to dentin

Aim: The aim of this study was to compare the microtensile bond strength of three adhesive systems, using different methods of dentin preparation. Materials and methods: A hundred and eight bovine teeth were used. The dentin from buccal face was exposed and prepared with three different methods, divided in 3 groups: Group 1 (DT)- diamond tip on a high-speed handpiece; Group 2 (CVD)-CVD tip on a ultrasonic handpiece; Group 3 (LA)-Er: YAG laser. The teeth were divided into 3 subgroups, according adhesive systems used: Subgroup 1-Adper Single Bond Plus/3M ESPE (SB) total-etch adhesive; Subgroup 2-Adper Scotchbond SE/3M ESPE (AS) selfetching adhesive; Subgroup 3-Clearfil SE Bond/Kuraray (CS) selfetching adhesive. Blocks of composite (Filtek Z250-3M ESPE) 4 mm high were built up and specimens were stored in deionized water for 24 hours at 37°C. Serial mesiodistal and buccolingual cuts were made and stick-like specimens were obtained, with transversal section of 1.0 mm2. The samples were submitted to microtensile test at 1 mm/min and load of 10 kg in a universal testing machine. Data (MPa) were subjected to ANOVA and Tukey's tests (p < 0.05). Results and conclusion: Surface treatment with Diamond or CVD tips associated with Clearfil SE Bond adhesive produced significantly lower bond strength values compared to other groups. Surface treatment with Er: YAG laser associated with Single Bond Plus or Clearfil SE Bond adhesives and surface treatment with CVD tip associated with Adper Scotchbond SE adhesive produced significantly lower bond strength values compared to surface treatment with diamond or CVD tips associated with Single Bond Plus or Adper Scotchbond SE adhesives. Clinical significance: Interactions between laser and the CVD tip technologies and the different adhesive systems can produce a satisfactory bonding strength result, so that these associations may be beneficial and enhance the clinical outcomes.

Effects of vaccination against reproductive diseases on reproductive performance of lactating dairy cows submitted to AI

Four experiments evaluated the effects of vaccination against bovine herpesvirus-1 (BoHV-1), bovine viral diarrhea virus (BVDV), and Leptospira spp. on reproductive performance of lactating dairy cows without (experiments 1, 2, and 3) or with previous vaccination against these diseases (experiment 4). Cows were assigned to a fixed-time AI protocol (FTAI; d -11 to 0) in all experiments, as well as AI 12. h upon estrus detection in experiment 3. Pregnancy status was determined with transrectal ultrasonography on d 30 and 71 (d 60 for experiment 3) after AI. Pregnancy loss was considered in cows pregnant on d 30 but non-pregnant on the subsequent evaluation. In experiment 1, 853 cows received (VAC) or not (CON) vaccination against BoHV-1, BVDV, and Leptospira spp. at the beginning of the FTAI (d -11) and 30. d after AI. Pregnancy loss was reduced (P=0.03) in VAC cows compared with CON. In experiment 2, 287 cows received VAC or CON 30. d prior to (d -41) and at the beginning (d -11) of the FTAI. Pregnancy rates on d 30 and 71 were greater (P≤0.03) in VAC cows compared with CON. In experiment 3, 1680 cows with more than 28. d in milk were randomly assigned to receive VAC or CON with doses administered 14. d apart, and inseminated within 15-135. d after the second dose. Pregnancy rates on d 30 and 60 were greater (P≤0.02) in VAC cows compared with CON. In experiment 4, 820 cows received (REVAC) or not (CON) revaccination against BoHV-1, BVDV, and Leptospira spp. at the beginning of the FTAI protocol (d -11). Pregnancy rates and loss were similar (P≥0.54) between treatments. Hence, vaccinating naïve cows against BoHV-1, BVDV, and Leptospira spp. improved reproductive efficiency in dairy production systems, particularly when both doses were administered prior to AI. © 2013 Elsevier B.V.

Effects of four anaesthetic protocols on the neurological and cardiorespiratory variables of puppies born by caesarean section

Twenty-four bitches which had been in labour for less than 12 hours were randomly divided into four groups of six. They all received 0(.)5 mg/kg of chlorpromazine intravenously as premedication, followed 15 minutes later by either 8 mg/kg of thiopentone intravenously (group 1), 2 mg/kg of ketamine and 0-5 mg/kg of midazolam intravenously (group 2), 5 mg/kg of propofol intravenously (group 3), or 2(.)5 mg/kg of 2 per cent lidocaine with adrenaline and 0(.)625 mg/kg of 0(.)5 per cent bupivacaine with adrenaline epidurally (group 4). Except for group 4, the bitches were intubated and anaesthesia was maintained with enflurane. The puppies' heart and respiratory rates and their pain, sucking, anogenital, magnum and flexion reflexes were measured as they were removed from the uterus. The puppies' respiratory rate was higher after epidural anaesthesia. in general the puppies' neurological reflexes were most depressed after midazolam/ketamine, followed by thiopentone, propofol and epidural anaesthesia.

Biochemical and physiological responses of sugarcane cultivars to soil water deficiencies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estimation of genetic parameters for partial egg production periods by means of random regression models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Random regressions models to describe the genetic variation of milk yield over multiple parities in Buffaloes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Parametric correlation functions to model the structure of permanent environmental (co)variances in milk yield random regression models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bayesian analysis of random regression models using B-splines to model test-day milk yield of Holstein cattle in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)