63 resultados para RAINWATER


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Water scarcity is becoming an increasing problem and more evident worldwide, rainwater utilization is characterized for being one of the simplest and cheapest solutions to preserve drinking water and is a known alternative technology and used to promote sustainability in buildings and reducing pressure on surface waters, it would also reduce runoff and can minimize flooding. The rainwater, while not potable may be used in potable water usage activities, and may thus saving 30 to 40% of potable water. In this work one can see the importance of the capture and use of rainwater (CAAC), bringing economy, to reduce consumption of potable water, reducing the problem of water shortage, and which methods and materials needed to cause its implementation. The work also promoted the characterization of rainwater in the city of Guaratinguetá (SP) and studied its potential use in public housing, calculating the volume needed for implementation of the tank and the cost to implement all rainwater utilization system, but because it is a region with a median rainfall index and the popular houses present an area of small water capitation, the result was not satisfactory. The cost for implementation was high and the financial return was well above average. The government should encourage and support more CAAC, as not thinking about the financial side is advisable to be widespread throughout the country, the benefits it can bring

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Civil - FEIS

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main aim of this paper was to use the REZZ software to calculate the tank volume rainwater harvesting system. For this purpose, rain data of Ponta Grossa-PR-Brazil were used considering different statistical treatment (average, 75%, 85%, 95% and 99% of confidence) and different roof areas (50, 80, 120 and 200 m2). The harvesting system was considered only for toilet flush in households with 3, 4 and 5 inhabitants. There were applied the following methods/concepts: Flow equalization (Rippl); Brazilian method as well the English and German practical methods. Further, the mass-balance was simulated for some conditions. All considered methods are described in NBR15527/07, the Brazilian standard for rainwater harvesting. As expected, the results pointed out for huge differences depending on the choice method and the statistical treatment of the rain data. The REZZ appliance showed to be useful thus permitting to set different conditions and to obtain rapid results in order to assist designers to adopt the best cistern volume for each particular case.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper focus to apply, to discuss and to propose the Maximum Harvesting Method improvement, regarding the method application, for household rainwater harvesting systems. For this purpose, the rainwater was considered to supply the flush toilet demand in a household for 3, 4, and 5 inhabitants. The 80, 120 and 200m2 catchments areas and the 0, 1, 2 and 4mm first flushes discharges were also considered. Further, the improvement suggestions for cistern volume calculus and volume/level dynamics variation in a period were presented and the results were compared applying the Simulation Analyses Method. The results indicate that the Maximum Harvesting Method could be applied and that the improvement proposal can be used to determinate the cistern volume as well to analyze the dynamic behavior of volume/level, constituting by itself a single tool to assist rainwater harvesting systems designers.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work aims to evaluate a simple procedure for rainwater treatment by applying natural corn starch as primary coagulant for non-potable harvesting households. For this purpose, coagulation, flocculation and filtration were carried out in lab essays in samples of roof and floor catchment without first-flush. There were investigated corn starch dosages from 1 to 12 mg/L in pH values around 6,0. The apparent color and turbidity were measured and the results were statistically presented. Results pointed out reductions around 70 and 80% for apparent color and turbidity (residuals of 53Hu and 13Tu), respectively.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this study was to investigate the performance of an experimental rainwater treatment system for non-potable uses. Without the first-flush discharge it was expected to control the quality of captured rainwater and to minimize the rainwater by-pass caused by the first-flush strategy. A full-scale direct filtration unit was operated and a solution of natural corn starch was used as the primary coagulant. The color, turbidity e coliform efficiencies of the unit was analyzed based on filtration loads and the net water production was estimated. The results pointed out turbidity removal up to 70.8% and color removal up to 61.0%. The backwash of the filtering system was completed in 3 minutes at the rate of 1,440 m3/m2day with consumption of treated water from 0.5% to 2.2%, based on the potentially harvesting.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thirty-seven rainwater samples were collected at Jaú River watershed, Dois Córregos city (SP), between August 2009 and July 2010, where were analyzed the following variables: pH, Na+ , K+ , Ca2+, Mg2+, NO3- , Cl- , SO4 2- , PO4 3- and SiO2. The results indicate that Ca2+ (6.65%) and NO3- (35%) are the most abundant ions that followed the trend: Ca2+ > Mg2+ > K+ > Na+ for cations and NO3 - > SO4 2- > Cland PO4 3- for anions. The phosphate fertilizers use, agricultural soils dust, lithology, biomass burning and fossil fuels can be the major contributing factors to explain the chemical composition of rainwater at Jaú River watershed, Dois Córregos city (SP).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper aimed to study the treatability of rainwater using natural coagulant tannin based. Assays were performed in laboratory scale and aimed to study the conditions most suitable for dosage and for pH of coagulation. Preliminary tests indicated that tannin concentration of 3% (m/m) prepared from the commercial solution presented the best set of results (84.3% of removal for apparent color and 82.51% for turbidity) compared to ferric chloride (66.25% of removal for apparent color and 67.82% for turbidity) and starch (73.68% of removal for apparent color and 67.19% for turbidity). The coagulation diagrams indicate that the best region for dosage ranges from 15 mg/L to about 37.5 mg/L and for pH ranging from about 6.5 to 7.5. The results indicate that the tannin based natural coagulant may be an alternative to conventional coagulants for rainwater treatment seeking non potable uses.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work aimed to develop an optimization methodology for reservoir sizing in rainwater harvesting systems in order to increase the economic viability of projects in this area. For this, concepts of Operations Research were used so as to develop mathematical programming problems related to minimizing the life cycle cost and maximizing efficiency. The results obtained for different sizing methods were presented based on a case study, emphasizing the importance of tools that are able to provide a more accurate analysis and tend to significantly increase the economic viability of rainwater harvesting systems.