Scintigraphy of the hepatobiliar system in patients with pulmonary tuberculosis

The objective of this paper was to evaluate the hepatobiliary function of patients with pulmonary tuberculosis under triple treatment, using the technetium-99m-DISIDA (99mTc-DISIDA) hepatobiliary scintigraphy. Ten men and three women with pulmonary tuberculosis were subjected to hepatobiliary scintigraphy at the beginning of triple treatment (M1) and two months after it (M2). Patients were from the urban area, of low socioeconomic level, malnourished, and chronic alcohol and/or tobacco users. Ten normal individuals were evaluated as controls. Radiotracer images were acquired on a computerized gamma camera (Orbiter-Siemens) and T1/2 uptake and excretion values were calculated. Nutritional status and serum hepatic enzyme levels for each patient were evaluated at M1 and M2. None presented clinical or laboratory antecedent of hepatobiliary disease. At M1, there were no hepatic serum or kinetic alterations of the 99mTc-DISIDA. At M2, patients presented better nutritional conditions than at M1; there was increased serum aspartate aminotransferase (AST) and reduced excretion time for 99mTc-DISIDA, which was interpreted as a more adaptive than toxic phenomenon, yet not all alterations were significant and none manifested clinically. Apparently, triple treatment acted on the liver inducing the P450 cytochrome enzymatic system, accelerating radiotracer excretion, which follows the same path as the bilirubins.

Serum inhibin A and angiogenic factor levels in pregnancies with previous preeclampsia and/or chronic hypertension: are they useful markers for prediction of subsequent preeclampsia?

OBJECTIVE: Our objective was to determine whether measurement of placenta growth factor (PLGF), inhibin A, or soluble fms-like tyrosine kinase-1 (sFlt-1) at 2 times during pregnancy would usefully predict subsequent preeclampsia ( PE) in women at high risk. STUDY DESIGN: We analyzed serum obtained at enrollment (12(0/7) to 19(6/7) weeks) and follow-up (24-28 weeks) from 704 patients with previous PE and/or chronic hypertension (CHTN) enrolled in a randomized trial for the prevention of PE. Logistic regression analysis assessed the association of log-transformed markers with subsequent PE; receiver operating characteristic analysis assessed predictive value. RESULTS: One hundred four developed preeclampsia: 27 at 37 weeks or longer and 77 at less than 37 weeks (9 at less than 27 weeks). None of the markers was associated with PE at 37 weeks or longer. Significant associations were observed between PE at less than 37 weeks and reduced PLGF levels at baseline (P =.022) and follow-up (P <.0001) and elevated inhibin A (P <.0001) and sFlt-1 (P =.0002) levels at follow-up; at 75% specificity, sensitivities ranged from 38% to 52%. Using changes in markers from baseline to follow-up, sensitivities were 52-55%. Associations were observed between baseline markers and PE less than 27 weeks (P <=.0004 for all); sensitivities were 67-89%, but positive predictive values (PPVs) were only 3.4-4.5%. CONCLUSION: Inhibin A and circulating angiogenic factors levels obtained at 12(0/7) to 19(6/7) weeks have significant associations with onset of PE at less than 27 weeks, as do levels obtained at 24-28 weeks with onset of PE at less than 37 weeks. However, because the corresponding sensitivities and/or PPVs were low, these markers might not be clinically useful to predict PE in women with previous PE and/or CHTN.

Effect of genotype, finishing system, and sex on physiochemical characteristics of goat meat

Foram utilizados 78 cabritos de ambos os sexos e de cinco genótipos: raça Alpina, ½ Boer + ½ Alpina, ¾ Boer + ¼ Alpina, ½ Anglo-nubiana + ½ Alpina e tricross (½ Anglo-nubiana + ¼ Boer + ¼ Alpina), com peso médio inicial de 14,1 ± 2,5 kg. Objetivou-se avaliar os efeitos do genótipo, do sistema de terminação e do sexo sobre as características físico-químicas da carne. Os sistemas de terminação foram constituídos: ST1 - cabrito + mãe em pasto e ST2 - cabrito desmamado confinado. Os cabritos do ST1 foram mantidos em piquetes formados com Panicum maximum cv. Tanzânia e os do ST2 receberam dieta completa com 16% PB e 73% NDT. Os valores de pH, a* (teor de vermelho), Perda de Peso ao Cozimento (PPC) e porcentagem de Extrato Etéreo (EE) foram influenciados pelo genótipo. Os teores de vermelho (a*) e L* (luminosidade), PPC e porcentagens de umidade, proteína, EE e cinzas foram influenciados pelo sistema de terminação. O músculo longissimus dorsidos animais ½ BA apresentou as melhores características físico-químicas. Se a preferência do consumidor for por uma carne mais macia e com maior teor de gordura, as fêmeas são mais indicadas.

Histopathology of the reproductive system of male sheep experimentally infected with Toxoplasma gondii

The aim of this study was to investigate the histopathological changes in reproductive system (testicles, epididymis, seminal vesicles, and prostate) of small male ruminants after Toxoplasma gondii infection. Eight sheep were inoculated with T. gondii: group I, four sheep (2.0 x 10(5) P-strain oocysts); group II, four sheep (1.0 x 10(6) RH-strain tachyzoites); and group III, two uninfected sheep maintained as control. Infection with T. gondii was confirmed by seroconversion (indirect fluorescent antibody test-IgG) in all the infected animals beginning on post-inoculation day (PID) 7. on PID 70, all the animals were euthanized and tissue samples (testicles, epididymis, seminal vesicles, and prostate) were collected and processed for histological analysis. The main changes detected were a focal mononuclear interstitial inflammatory infiltrate in the prostate and seminal vesicles; diffuse testicular degeneration associated with calcification foci and a multifocal mononuclear interstitial inflammatory infiltrate; and a mononuclear interstitial infiltrate and focal necrotic areas of the muscle fibers surrounding the seminal vesicles. The histopathological findings of this work, along with the detection of T. gondii in the examined parenchyma tissues (immunohistochemistry) and the results obtained by other authors examining different tissues, suggest that histological changes diagnosed in the reproductive system of rams infected with T. gondii are strongly suggestive of toxoplasmatic infection.

Analysis in vitro of direct bonding system with cyanoacrylate ester and orthodontic wires

The aim of this study was to evaluate the tensile strength of orthodontic wires bonded onto the enamel with cyanoacrylate ester. To obtain the specimens, 120 human premolars (extracted for orthodontic or periodontal reasons) were included in acrylic blocks of rapid polymerization with three teeth each. Four groups were formed with ten specimens each. In the specimens, a dental splint model was made with cyanoacrylate ester and round stainless steel wire. In groups I, II and III, cyanoacrylate ester was used with round steel wires, with variation in diameter: 0.014 inches; 0.016 inches and 0.018 inches, respectively. In group IV, round steel wire 0.018 inches was used with photo polymerizing resin composite with previous acid etching. The adhesive force of the materials was measured in two points under the action of the tensiometer (ETM-USA). The number of loose wires was counted along with those that remained fixed according to the different levels of force applied because of the direction of the tensile force (vertical or horizontal) and the diameter of the wire used. The data obtained were first submitted to a descriptive analysis and then submitted to a statistical analysis (Friedman's Test and Dunn's Test of Multiple Comparison - Epi-info 3.2). Within the limitations of the experimental conditions presented, the cyanoacrylate ester or 'Super Bonder (R)' maintained bonded to enamel and steel wires (0.016 and 0.018 inches) during the tensile strength tests under different levels of applied forces.

Biocompatibility of an adhesive system and 2-hydroxyethylmethacrylate

The aim of the study was to evaluate the biocompatibility of an adhesive system and a resin component when implanted into connective tissue of rats. Forty sponges embedded in both materials: Scotchbond MP (SBMP/3M - Group A) and 2 - hydroxyethyl-methacrylate (HEMA - Group B), were implanted into dorsal connective tissue of 20 animals. After 7, 15, 30, or 60 days of the implantation, the animals were sacrificed; implant sites were excised and immersed for 24 hours in Kamovisky's fixative. The samples were processed under routine histologic technique, being stained with H & E. Histological evaluation showed that both materials promoted at 7 days intense inflammatory response with predominance of neutrophils and macrophages. The intense connective reaction was replaced for fibroblastic proliferation associated with macrophages and foreign body giant cells over time. The persistent moderate inflammatory reaction adjacent to scattered fragments of materials was greater to HEMA than to the SBMP. Both experimental materials did not show acceptable biocompatibility with connective tissue of rats in spite of allowing an evident connective tissue healing.

Bond strength of an adhesive system irradiated with Nd : YAG laser in dentin treated with Er : YAG laser

The purpose of this in vitro study was to verify through micro tensile bond test the bond strength of an adhesive system irradiated with Nd:YAG laser in dentine previously treated with Er:YAG laser. Twenty caries free extracted human third molars were used. The teeth were divided in four experimental groups (n = 5): (G1) control group; (G2) irradiation of the adhesive system with the Nd:YAG laser; (G3) dentin treatment with Er:YAG laser; (G4) dentin treatment with Er:YAG laser followed by the irradiation of the adhesive system with Nd:YAG laser. The Er:YAG laser fluency parameter for the dentin treatment was of 60 J/cm(2). ne adhesive system was irradiated with the Nd:YAG laser with fluency of 100 J/cm(2). Dental restorations were performed with Adper Single Bond 2/Z250. One tooth from each group was prepared for the evaluation of the adhesive interface under SEM and bond failure tests were also performed and evaluated. The statistical analysis showed statistical significant difference between the groups G1 and G3, G1 and G4, G2 and G3, and G2 and G4; and similarity between the groups G1 and G2, and G3 and G4. The adhesive failures were predominant in all the experimental groups. The SEM analysis showed an adhesive interface with features confirming the results of the mechanical tests. The Nd:YAG laser on the adhesive system did not influence the bond strength in dentin treated or not with the Er:YAG laser.

Effect of Resin Cement System and Root Region on the Push-out Bond Strength of a Translucent Fiber Post

Objectives: This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems.Methods: Forty bovine incisors were randomly assigned to five different resin cement groups (n=8). After endodontic treatment and crown removal, translucent glass fiber posts were bonded into the root canal using five different luting protocols (self-cured cement and etch-and-rinse adhesive system; dual-cured cement and etch-and-rinse adhesive system; self-cured cement and self-etch adhesive system; dual-cured cement and self-etch adhesive system; and dual-cured self-adhesive cement). Push-out bond strength was evaluated at three different radicular levels: cervical, middle, and apical. The interface between resinous cement and the post was observed using a stereoscopic microscope.Results: Analysis of variance showed a statistically significant difference among the cements (p<0.05) and the root canal thirds (p<0.05). The self-adhesive resinous cement had lower values of retention.Conclusions: The resin cements used with etch-and-rinse and self-etch adhesive systems seem to be adequate for glass fiber post cementation.

Clinical microscopic analysis of protaper retreatment system efficacy considering root canal thirds using three endodontic sealers

To evaluate the efficacy of ProTaper Universal rotary retreatment system and the influence of sealer type on the presence of filling debris in the reinstrumented canals viewed in an operative clinical microscope. Forty-five palatal root canals of first molars were filled with gutta-percha and one of the following sealers: G1, EndoFill; G2, AH Plus; G3, Sealapex. The canals were then reinstrumented with ProTaper Universal rotary system. Roots were longitudinally sectioned and examined under an operative clinical microscope (10x), and the amount of filling debris on canal walls was analyzed using the AutoCAD 2004 software. A single operator used a specific software tool to outline the canal area and the filling debris area in each third (cervical, middle, and apical), as well as the total canal area. Data were analyzed by Kruskal-Wallis test and Tukey test at P < 0.05. Sealapex demonstrated significant differences in the average of filling debris area/canal among the 3 thirds. This group revealed that apical third showed more debris than the both cervical and middle third (P < 0.0001). Endofill presented significantly more filling debris than Sealapex in the cervical third (P < 0.05). In the middle (P = 0.12) and apical third (P = 0.10), there were no differences amongst groups. Debris was left in all canal thirds, regardless of the retreatment technique. The greatest differences between techniques and sealers were found in the cervical third. Microsc. Res. Tech. 75:12331236, 2012. (C) 2012 Wiley Periodicals, Inc.

Pulvinus functional traits in relation to leaf movements: A light and transmission electron microscopy study of the vascular system

Previous studies on legume pulvini suggest that the vascular system plays an important role in the redistribution of ions and transmission of stimuli during leaf's movements. However, the number of anatomical and ultrastructural studies is limited to few species. The aim of this paper is to investigate the structure and cellular features of the pulvinus vascular system of nine legume species from Brazilian cerrado, looking for structural traits pointing to its participation in the leaf's movements. Samples were excised from the medial region of opened pulvinus of Bauhinia rufa, Copaifera langsdorffii, Senna rugosa (Caesalpinioideae), Andira humilis, Dalbergia miscolobium, Zornia dilphylla (Faboideae), Mimosa rixosa, Mimosa flexuosa and Stryphnodendron polyphyllum (Mimosoideae), and were prepared following light microscopy, transmission electron microscopy and histochemical standard techniques. The vascular system occupies a central position, comprises phloem and xylem and is delimited by a living sheath of septate fibers in all the species studied. This living cells sheath connects the cortex to the vascular tissues via numerous plasmodesmata. The absence of fibers and sclereids, the presence of phenolic idioblasts and the abundance and diversity of protein inclusions in the sieve tube members are remarkable features of the phloem. Pitted vessel elements, parenchyma cells with abundant cytoplasm and living fibriform elements characterize the xylem. The lack of lignified tissues and extensive symplastic continuity by plasmodesmata are remarkable features of the vascular system of pulvini of the all studied species. (c) 2007 Elsevier Ltd. All rights reserved.

In silico network topology-based prediction of gene essentiality

The identification of genes essential for survival is important for the understanding of the minimal requirements for cellular life and for drug design. As experimental studies with the purpose of building a catalog of essential genes for a given organism are time-consuming and laborious, a computational approach which could predict gene essentiality with high accuracy would be of great value. We present here a novel computational approach, called NTPGE (Network Topology-based Prediction of Gene Essentiality), that relies on the network topology features of a gene to estimate its essentiality. The first step of NTPGE is to construct the integrated molecular network for a given organism comprising protein physical, metabolic and transcriptional regulation interactions. The second step consists in training a decision-tree-based machine-learning algorithm on known essential and non-essential genes of the organism of interest, considering as learning attributes the network topology information for each of these genes. Finally, the decision-tree classifier generated is applied to the set of genes of this organism to estimate essentiality for each gene. We applied the NTPGE approach for discovering the essential genes in Escherichia coli and then assessed its performance. (C) 2007 Elsevier B.V. All rights reserved.

Towards the prediction of essential genes by integration of network topology, cellular localization and biological process information

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)