319 resultados para Placas dentárias


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objective: evaluate the immediate dental and skeletal changes induced by the Herbst appliance on early treatment of Angle´s Class II malocclusion. Material and Method: several electronic databases such as Scopus, Pub Med, Medline, Cochrane Library, Lilacs and Scielo were searched. The abstracts that fullfilled the selection criteria were selected and those that did not provide enough information about these criteria were selected but the final decision of including them or not on the research, was taken after the complete reading of the article. The selection criteria were: clinical studies with Class II individuals, both male and female, with initial age of 7 to 10 years, treated with the Herbst appliance that analysed the dental and/or skeletal changes evaluated on lateral cephalometric radiographs; researches where the treatment performed did not involve extractions or surgical interventions; studies that included patients without syndromes or health concerns and articles published in English or Portuguese. Results and Conclusions: five articles were selected. The articles showed that significant changes happened in the mandibular sagittal lenght, on facial convexity angle, on maxillo-mandibular relationship, on retroclination of the upper incisors and on distal movement of the upper molars, on proclination of the lower incisors and on extrusion of the lower molars. The appliance exerted a limited effect on the anterior relocation of the maxillary complex and on facial heights. However, more studies about the performance of the Herbst appliance on early treatment of Class II are needed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The knowledge of Forensic Anthropology is very importance in cases of identification of human remains. One phase of this process is the study of human height, which can be accomplished with relative ease when intact corpses, complete skeletons or long bones are available. However, the experience of Forensic Dentistry is essential in situations in which there is only information of the skull or of the teeth. The objective of this study was to review in the literature and evaluate works concerning the estimate of the height calculated from dental dimensions. Carrea, in 1920, proposed the estimation of the probable height of an individual by developing formulas for maximum and minimum heights from measurements of the lower central and lateral incisors and canines. The method was used in the case "Josef Mengele", to complement estimates. Tested in the Brazilian population, 70% of match between the actual and the estimated stature were obtained. Using more precise instruments, in the modified method, 96% of correct matching were verified. Recently, a new formula was introduced to estimate height, from measurements of upper teeth, because the technique cannot be used when jaw is not available. The correlation between height and dental dimensions is demonstrated. However, there is still a lack in scientific literature in this field, and further studies are necessary. The estimate of height from dental dimensions can be very useful and important, especially in situations where the complete skeleton it not found, and long bones are not available.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Muscle activity has been studied indirectly through analyses of temperature variation in skin surface temperature on the masticatory muscles. These procedure may be an important tool for clinical evaluation and assessment of the evolution of temporomandibular disorders, as well as monitoring the adopted protocol. Thus, its utilization for identified pathological alterations on blood circulation and/or on metabolic activity in subcutaneous tissues, such as the masticatory muscles, is justified. The aim of this study was to investigate the effect of occlusal splints’ thickness on the variation of surface temperature of the anterior temporal and masseter muscles during rest and clenching. It were analyzed 20 symptomatic subjects (10 males and 10 females) selected through the Research Diagnostic Criteria (RDC) questionnaire. Temperature expressed in degrees Celsius (ºC) was measured on the surface of both muscles measured with the aid of a digital thermometer with an infrared radiation reading system. The surface temperature of the anterior temporal and masseter muscles presented significant reduction during teeth clenching in relation to the mandibular rest position. However, there were no significant differences between conditions with and without occlusal splint or between the different thicknesses of splints analyzed. Masticatory muscles showed a considerable similar behavior for both sides, and no significant distinctions were observed between male and female patients.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: Early childhood is an essential phase of life for the future of oral health. The link between educational and health sectors can facilitate incorporating educational and preventive oral health practices in daily teaching in pre-schools. The main measure is manual tooth-brushing, which is the most accessible method for most of the population. Objective: The objective of this study is to evaluate macroscopically the wear on the bristles, form of storage, and identification of tooth brushes. Material and method: 345 toothbrushes used by children between the ages of 2 and 5 were evaluated in 4 pre-schools, by 2 participants from the oral health program. The Rawls et al. index was used to evaluate the bristles. Result: There were statistically significant differences (p = 0.020 - Mann-Whitney U test) between the frequency of toothbrushes, with the highest being (n = 205) stored at participating school; and, between adequate and inadequate brushes (p < 0.05 - X2 test) with 31.7 and 60%, respectively, classified as unfit for tooth-brushing. Of the toothbrush holders evaluated 100% were used collectively. Regarding identification, 18% of the toothbrushes were not identified in participating schools, and 37% in the others. Conclusion: The toothbrushes exhibited marked wear, and storage was inadequate; however, the schools participating in the oral health program showed toothbrushes with bristles less worn. It is suggested that training of educators regarding correct storage and evaluation of toothbrushes for wear of the bristles should be undertaken in all early childhood schools.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objective: To evaluate the perception and attitude of kindergarten teachers in relation to the storage of toothbrushes. Methodology: The analysis instrument used was a structured and previously validated questionnaire. The sample universe of this study was composed of all states and municipals kindergarten school teachers who taught in school year of 2010 at the town of Araçatuba / SP (n = 232). The criteria used to integrate the study were: to have a college degree and agree to participate. Results: 164 teachers participated of the study. The results were analyzed using Epi Info 6.04 and showed that 55% of the teachers had received some information about the proper storage of toothbrushes, and only 35% believed that the toothbrushes were storaged improperly. Most teachers, 97% reported being possible the transmission of microorganisms through the brush, however, there was observed difficulty in identifying which diseases could be transmitted. About the question related to the execute of supervised toothbrushing, 93% of the educators said that they realize supervised toothbrushing and the same percentage was observed for the identification of preschoolers at the toothbrushes. Conclusions: The perception and attitude of the teachers ahead the storage of toothbrushes are weak and limited, so there is a need for educational programs targeted to this group, so that they would have more information and knowledge related to the correct storage of toothbrushes and would continue to perform oral health preventive methods.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Stricter environmental policies are shown necessary to ensure an effective pollutant emission control. It is expected for the present year of 2015, that Brazil will assume, at the 21th United Nation's Climate Change Conference (COP21), implementation of commitment to a low carbon economy. This positioning affects the industrial environment, so that is deemed necessary to search for new technologies, less aggressive to the environment, so the adequacies to the new emission policies do not cause a negative effect on production. Almost all of the processes performed in the steel industry demand burning fuel and, therefore, flue gases are sent to the atmosphere. In this present work is discussed the utilization of heat exchangers so, by recovering part of the available heat from the flue gases of certain industrial process, the combustion air is preheated. The combustion air preheat results in less energy requirement, i.e., less need of fuel consumption and, in addition, minor amount of pollutants to be emitted. Due to better fitting to the process, it is studied the utilization of spiral plate heat exchangers. The heat exchanger dimensioning is made by an iterative method implemented in the software Microsoft Excel. Subsequently are analyzed the gains in terms of process's thermal efficiency improvement and the percentage of fuel saving. The latter implies in reduction of the same percentage of greenhouse gases emission

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho teve por objetivo determinar a ocorrência e a freqüência de fungos em banana 'Prata anã' e elucidar o agente causal das podridões em pós-colheita de frutos provenientes do norte de Minas Gerais. Dois métodos de isolamento foram adotados: diluição em placas, a partir da lavagem de frutos verdes, e direto de frutos maduros. Os fungos Colletotrichum musae, Trichoderma harzianum, Fusarium equisetii, Penicillium sp. Aspergillus parasiticus, Trichothecium roseum, Colletotrichum acutatum, Alternaria sp., Cladosporium musae e Curvularia lunata foram os mais freqüentemente associados aos frutos. A patogenicidade desses fungos foi testada pela substituição de discos da casca de frutos verdes por discos de micélio. Colletotrichum musae apresentou área média lesionada em torno do ponto de inoculação igual a 5,8 cm², enquanto para os demais fungos testados não passou de 1,50 cm². Os resultados mostraram que C. musae é o agente primário das podridões dos frutos examinados com 100 % de incidência e os demais fungos limitaram-se a necrosar os ferimentos em torno do ponto de inoculação. O modo de infecção latente, causada por C. musae, parece favorecer, primeiramente, a colonização interna dos tecidos e, posteriormente, a ação dos fungos oportunistas, que aceleram as podridões nos frutos e na coroa.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O primeiro registro para o Atlântico Sul ocidental de uma espécie do gênero Malacoraja Stehmann, 1970 é feita com base na descrição de Malacoraja obscura, espécie nova, proveniente do talude continental do Sudeste brasileiro dos estados do Espírito Santo e Rio de Janeiro em profundidades de 808-1105 m. A espécie nova é conhecida através de cinco exemplares e é distinta de seus congêneres pela sua coloração dorsal composta por numerosas manchas esbranquiçadas e pequenas na região do disco e nadadeiras pélvicas, por apresentar uma fileira irregular de espinhos ao longo da superfície dorsal mediana da cauda a qual persiste em espécimes maiores (desde a base da cauda até dois-terços do seu comprimento numa fêmea de 680 mm de comprimento total, CT) e uma região pequena desprovida de dentículos na base ventral da cauda (estendendo somente até a margem distal da nadadeira pélvica). Outros caracteres diagnósticos em combinação incluem a ausência de espinhos escapulares em indivíduos maiores, número elevado de fileiras dentárias (64/62 fileiras num macho subadulto de 505 mm de CT e 76/74 numa fêmea de 680 mm de CT) e de vértebras (27-28 Vtr, 68-75 Vprd), coloração ventral do disco uniformemente castanha escura, duas fenestras pós-ventrais na cintura escapular, fenestra pós-ventral posterior grande, forame magno circular e dois forames para a carótida interna na placa basal ventral do neurocrânio. Machos adultos não são conhecidos, porém uma descrição anatômica de M. obscura, sp. nov., é fornecida. Comparações são realizadas com todo o material conhecido de M. kreffti, com a literatura sobre M. senta e com material abundante de M. spinacidermis da África do Sul; M. obscura, sp. nov., assemelha-se mais a M. spinacidermis do Atlântico Sul oriental em esqueleto dérmico, coloração e tamanho. Malacoraja é monofilético devido à sua espinulação e apêndices rostrais conspícuos e é aparentemente composta por dois grupos de espécies, um para M. obscura e M. spinacidermis e outro para M. kreffti e M. senta, porém a elucidação das relações filogenéticas entre as espécies necessita de mais informações anatômicas, principalmente das duas últimas espécies.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Avaliou-se a preferência alimentar de adultos de Diabrotica speciosa (Germar), pelos genótipos de batata Achat, Baronesa, Monalisa, N 140-201 e NYL 235-4. Foram realizados ensaios com e sem chance de escolha, em laboratórios e em casa de vegetação, na FCAV/UNESP, Jaboticabal, SP. em dois testes utilizaram-se discos de folíolos provenientes de plantios em vaso (plantas com 40 dias); em outros seis semelhantes (exceção ao genótipo N 140-201) foram utilizados discos de folíolos provenientes de plantio de campo (plantas com 30, 50 e 70 dias). Nas placas de Petri (repetições) foram liberados dois adultos/disco. Dois outros ensaios foram efetuados em gaiolas (sem chance de escolha), no interior de casa de vegetação, com plantas com 15 e 45 dias de idade, liberando-se três e 10 adultos/planta respectivamente, avaliando-se o consumo de área foliar quatro e cinco dias após. Nos testes em laboratório com material de vaso, o genótipo NYL 235-4 (com e sem chance) foi o menos consumido (1,08 a 1,12 mg de peso seco). Com material de campo (com e sem chance), o peso de matéria fresca consumida pela praga foi menor em NYL 235-4 (médias de 26,2 e 66,1 mg) e Baronesa (30,2 e 57,9 mg). Nos ensaios em gaiolas (sem chance) também verificou-se menor consumo em NYL 235-4 (3,35 cm² e 16,70 cm²/planta). Esses resultados revelam que o genótipo NYL 235-4 apresenta resistência do tipo não-preferência para alimentação em relação a D. speciosa.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The great importance of cockroaches as household pest have been on their ability to spread microorganisms harmful to humans and animals. Rest during the day in dark, humid and hot as sewerage. At night go into stores and kitchens or places to deposit and manipulation of food as bakeries, restaurants, hospitals and homes wich requires clinig operations. This work aimed to evaluate mortality of B. germanica ( L., 1767) ( Blattodea: Blattellidae) under different periods and exposure area treated by insecticides in laboratory. The tests were carried out at Department of Fitossanidade at UNESP, Campus of Jaboticabal, SP, Brasil. The insecticides were applied by Potter's tower sprayer on Petri dishes. Three times of exposure (2, 8 and 32 min) and four exposure areas ( 25, 50, 75 and 100%) and volume of 0,5 ml for the second experiment were tested. It was used the insecticides Pyrethroids gammacyalothrine, deltamethrine, lambdacialothrine, alfacipermethrine, cipermethrine and carbamates bendiocarb, in the dosages recommended by the manufacturers, and I was used control without application. Five adult cockroaches was confined in the dishes for both experiments. The mortality evaluation was done 0, 1, 2, 4, 24, 48 and 72 hours after of the confinement on the treated surface. It was concluded that for exposure duration experiment all the insecticides have a good efficiency. The exposure area experiment the insecticide cipermethrine was what the one which had the higher mortality. Regarding to the effect of exposure duration on the accumulated mortality every duration times had a high mortality. In relation to the exposure area the highest mortality reached to 100% of treated area.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this paper was to evaluate the no-preference for feeding and biological aspects of Spodoptera eridania fed on cowpea cultivars BR17 Gurgueia, BRS Urubuquara, BRS Nova Era, Sempre Verde, BRS Milenio and BR3 Tracuateua. In free-choice test, leaf discs were placed in Petri dishes where one third instar larvae per cultivar was released, whereas in no-choice test one leaf disc was placed per Petri dish where one caterpillar per cultivar was released, evaluating their attractiveness after 1, 3, 5, 10, 15, 30, 60, 120, 360 and 720 minutes, as well as the leaf area consumed. Randomized blocks and complete randomized blocks design were used for free-choice and no-choice tests, respectively, with six treatments and 10 replications. The evaluation of the biological parameters of S. eridania was carried out in Petri dishes where recently hatched caterpillars were transferred in the proportion of one per dish, and the leafs of the cultivars were offered to them during the whole larval period, and we evaluated: periods and viabilities of larvae and pupae, overall viability, weight of larvae and pupae, sex ratio, longevity and overall cycle. Complete randomized design was used with six treatments and 30 replications. In no- preference for feeding free-choice test the cultivars Sempre Verde and BR17 Gurgueia were the most and the least consumed, respectively. Regarding the effects of cowpea cultivars on larval viability we can infer that BRS Urubuquara and Sempre Verde show antibiosis-type resistance to S. eridania.