82 resultados para Paleontología estratigráfica
Resumo:
Pós-graduação em Geologia Regional - IGCE
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The Pantanal is a Quaternary sedimentary basin located at the left margin of the Upper Paraguay River, west-central Brazil. Basin infilling was mainly by siliciclastic sediments and the stratigraphic succession exhibits an overall finingupward pattern. The depositional system tract is composed by a large meandering fluvial plain and several marginal alluvial fans, being the Taquari megafan the most striking feature. The present landscape is a complex tropical wetland, with geomorphic features derived from the present conditions and other inherited from successive Pleistocene and Holocene climates. During the Pleistocene, the sedimentary environment was dominated by braided alluvial fans, the original geometry of which is preserved as relict forms, permitting remarkable patterns of distributary paleochannels to be easily recognized in satellite images. Eolian processes were active in some abandoned lobes, contemporaneously with sedimentation in active fan lobes. Closed ponds bordered by lunette sand dunes, originally salt pans produced by eolian deflation, are relict eolian landforms in the Pantanal landscape. Eolian processes were probably more effective at the glacial maximum. Landscape has been changing in the Pantanal area since the end of the Pleistocene in adaptation to a more humid and warmer environment prevailing during Holocene. Initiation of the modern wetland has occurred during the Pleistocene / Holocene transition, with the change to a more humid climate and the individualization of lacustrine systems. The modern Pantanal wetland is a vast expanse of poorly drained lowlands that experiences annual flooding from summer to fall months. Although climatic fluctuations have occurred during all the Holocene, the alluvial fans have remained active depositional systems and lobes were formed by progradation and abandonment. Abandoned lobes were subjected... (Complete abstract click electronic address below)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This work presents structural studies in the northwestern portion of the Pitanga Structural High, between the towns of Ipeúna and Charqueada. The area is composed by the sedimentary rocks from Paraná Basin, represented basically by Paleozoic rocks (Itararé Group, Tatuí, Irati and Corumbataí formations) and Mesozoics rocks (Pirambóia and Botucatu formations), in association with lower Cretaceous intrusive basic rocks expressed by dikes and sills. The most important structural features are distensive faults, which put together unleveled tectonic blocks and are frequently filled by diabase dikes. In this context, the main objective of this work is the study of local structures and the recognition of the tectonic association between dropped and uplifted blocks, jointly with the caracterization of a production, migration and storage model for hydrocarbons. Through the interpretation of aerial photos, field recognitions, structural and laboratorial analysis, a normal fault with direction of N30W and a slip of 20-25 meters located south of Ipeúna was recognized this fault puts the Tatuí and Irati Formations side by side. At this place and by the SP-191 route (north of Ipeúna city), sandstones from the top of Tatuí Formation are impregnated by asfaltic material. The data interpretation shows that local fault systems with NW directions have played a determinant part in the fault blocks arrangement, placing sandstone lenses from Tatuí Formation topographically above the oil shales from Irati Formation. In addition, these systems acted as migration paths to transport and storage hydrocarbon in sanstone lenses from Tatuí Formation
Resumo:
The main goal in this research is a tectono-estructural characterization of the Cherne, Albacora and Namorado Fields, located at Campos Basin, in order to investigate the relationship between the geologic evolution and the rock´s physical properties of the reservoir, and how they affect the hydrocarbon accumulation in those fields. Well correlations show that the inferior turbidites have a regional lateral continuity. Basic petrophysics analysis, calculated here, shows that the three fields present porosity values that range from 15 to 20%, shale volume range from 26 to 30% and formation water saturation range from 23 to 45%, based on formation water resistivity dada from Albacora Field. Petrophysics maps feature a trend in Albacora Field that increase the porosity values to SE, and in Cherne and Namorado Field the trend increase towards N. Seismic horizons where interpreted between the first appearance of the Namorado Sandstone and the top of Quissamã Formation. This interval presents normal listric faulting, in Cherne and Namorado Field with NWSE and NE-SW direction, and sedimentation trend to NW-SE, in Albacora Field the faulting presents a NNE-SSW and N-S direction, with a sedimentation trend to NE-SW. Seismic attribute maps present amplitude anomalies close to the producing wells, and on Namorado Field, it indicates a potential hydrocarbon accumulation in the NE region. For each field is indicated laboratory tests for a better characterization of the petrophysical properties, since that they don’t form the same reservoir level, therefore, not influencing the water saturation calculation
Resumo:
The Rio Claro Formation, Tertiary-Quaternary age, is composed of unconsolidated sediments deposited by fluvial systems. In Paulínia (SP) region geological studies comprising sedimentological, structural and geomorphological aspects indicate that the Rio Claro Formation is constituted by deposits of a meandering fluvial system. Data from SPT drillings were used to obtain sedimentary textural information in order to generate stochastic stratigraphic models. Particle size analysis was carried with the core samples which resulted in the distinction of five litofacies, three of which can be grouped into only one mudstone unit. The other two facies represent channel belt facies, being clayey sands and medium to coarse sands. Geostatistical modeling of the stratigraphic architecture followed together with correlation of analogue outcrop data and conceptual models for this type of depositional system. 100 models were generated with the SPT drillings and 50 models were generated with data from an analogue outcrop, which allowed constraining of both simulation sets to the depositional model given for the region. T-PROGS methodology has good applicability in simulating stratigraphic frameworks and its inherent limitations may be approached with parallel studies, such as stochastic modeling of analogue outcrops or geophysical methods
Resumo:
The area where the study was conducted is located in the central-western state of Goias. It geologically inserts the northern portion of the Greenstone Belt of Faina which belongs to the Archean terranes that fits in Brasília Fold Belt and Tocantins Structural Province. This region is known for its greenstone lode gold potential and it was heavily exploited by pioneers and prospectors, leaving many records for where they have been through. Preliminary work done by Orinoco Brasil Mineração in their required areas at the region showed that the environment is promising for gold mineralization and that the ore is controlled by structures. Therefore the objectives of this work were the geological and structural mapping in semi detail scale to improve geological, stratigraphic and structural controls present attributing possible ore understanding. With the development of the work there were recognized on the desktop three structural domains separated by a thrust fault. For each domain were discriminated the geological units ranging in gneisses, quartzites formed from coarse sediments arcoseanos, and schists. By mapping structures there were found five deformation phases, Dn-2, Dn-1, the Dn event that generated the main foliation (Sn) in high representation and two post-stages Dn with brittle late manifestations. The detail mapping of the Rattlesnake Gallery showed that the mineralized quartz vein is consistent with axial-plane foliation Sn-2 belonging to the oldest deformation Dn-2 phase and that the high grade is distributed in the hinge region folds of the same phase
Resumo:
The Itararé Group is the record of one of the most significant glaciation events of the Gondwana. Of neocarboniferous-eopermian age, this unit has facies associations interpreted as resulted from shallow marine settings with glacial and deglacial water influence. The role of glaciers on the tectonic-sedimentary processes of the Itararé Group is striking, as typical facies such as diamictites, tilites, shales and rhythmites with dropstones are generated, besides the existence of glacially striated and polished surfaces. This work had as main goal to contribute to the geological knowledge of the Itararé Group in the central eastern portion of São Paulo State, using as basis outcrops from Itu, Salto and Porto Feliz, and also pertinent bibliographic data and well profiles located in the surrounding areas. About the stratigraphic framework, genetic association and paleogeography of these deposits, this work concludes that the area studied comprises the basal section of the Itararé Group. The stacking of the facies recognized during the field work begins with the striated and polished surfaces of the basement, described in Salto, superposed by tilites and diamictites with glacial movement features. Over these are the turbidites from Itu, associated with the glacier retreat. The outcrops of Porto Feliz are at the top of this succession, with deposits generated by flows with lateral and vertical variations, sometimes with prevalence of tractive conditions, and sometimes with sediments transported largely by suspension. Paleocurrent measurements show main flow directions towards NW, the same as glacial striae, suggesting the influence of reworking of sediments by the meltwater during deglacial periods
Resumo:
The Pirambóia Formation is a lithostratigraphic unit of the Paraná Basin, positioned between the Corumbataí (lower) and Botucatu (upper) Formations on the eastern edge of the basin. This unit is focused by many studies due to its great importance as an essential component in the Guarani Aquifer System (SAG) and the petroleum system “Irati-Pirambóia”, as excellent reservoirs. The Pirambóia Formation is historically the subject of several controversies on issues like age, contact relationships with the upper unit and depositional paleoenvironment. Despite these aspects, the Pirambóia Formation is commonly taken to be of Triassic age and is considered a product of wet aeolian systems, with plenty of wet interdunes and subordinate fluvial facies. In this work, by using techniques such as facies analysis, depositional architecture and facies association, facies of this unit were characterized and their depositional paleoenvironment was inferred particularly in Jundu Mining, region of Descalvado in northeastern São Paulo. Techniques such as grain size and petrographic analyses, aimed to characterize this unit as a potential reservoir rock. Five facies were described for the Pirambóia Formation in the studied region: St, Sh, Sm, Sr and Gt facies, generated by sedimentary processes of the bottom load type, mostly under low flow regime (with exception for the Sh facies, which is formed by upper flow regime processes). In addition to that, four facies associations were recognized from the architectural elements, primarily contained within the main channel: complex channel bars, composed by foreset macroforms (FM), sandy bedforms (SB) and gravel bars and bedforms (GB); flood deposits, constituted by laminated sand sheets (LS); deposits of hyperconcentrated flows and eolian deposits. It was interpreted that the Pirambóia Formation in Descalvado (SP) is the record of the sedimentation of braided rivers, with dunes and interdunes deposits...
Resumo:
A wedge facies cycle it‟s a body of sedimentary rock, bounded above and below by unconformity and which represents a transgressive-regressive cycle of deposition. This cycle is formed by the following succession of facies: non-marine (N), transitional-coarse texture, and marine-fine texture; The objective of this study have been members of the sandstones and Triumph Siderópolis, seconded by rare calcareous sandstones and very thin limb Paraguaçu. Through analysis of facies in wells testified by CPRM, it was possible to group on facies successions and set the standard stacking. The Triunfo Member consists of three cycles of facies, lithology whose standard indicates a vertical arrangement ''type'' tuning up, other words, a component sandy bottom in the form of '' box'', followed by components sandy-clayey and clayey-carbonaceous (1st and 2nd cycle) and / or shale and limestone (3rd cycle), represented by the base member Paraguaçu. The first cycle only occurs on NF-5 wells and NF-6 in the form of Onlap channel dug in post-Itararé group. The cycle II also reaches wells NF-4 and NF-3 to the north, while the cycle III reaches the southern area, well NF-9. The member Paraguaçu, well PP-25 is predominantly clay-síltico, also stand out limestones and sandstones. The limestones are not coastal marine organisms probably connected with the algae and cyanobacteria, the sandstones are fine-textured, very thin and coastal deposition environment. The member Siderópolis, well NF-2 consists of a sandstone fluvial-estuarine deployed in the valley section, and succeeded by sandstones and siltstones bioturbed, they have linked the transgression of the Fm. Palermo
Resumo:
The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation