Application of methylotrophic yeast Pichia pastoris in the field of food industry - A review

Since ancient times, the utilization of yeasts by the man has a great impact on the socio-economic development. After the advent of the technology of recombinant DNA, great advances have occurred due to the acquisition of strains of mutant yeasts in the field of applied research, and Saccharomyces cerevisiae has soon been outstanding as an interesting candidate for the expression of heterologous proteins of biotechnological interest. As the time goes by other alternative systems of expression have been shown because they have advantages over Saccharomyces cerevisiae. Among those new systems, Pichia pastoris is outstanding as methylotrophic yeast capable of growing in a culture medium containing methanol as the only source of carbon and energy. The induction of production of glycerol-3-phosphate dehydrogenase (GPD, NAD(+): oxido-redutase EC 1.1. 1.8) by Pichia pastoris was accomplished in the medium containing methanol. One of the most important key parameters in Pichia pastoris expression system is the methanol concentration. Bibliographic reviews on the Pichia pastoris production system have shown that the best culture conditions vary according to the strain used and/or kind of heterologous protein desired to be expressed. Therefore, we have sought to develop a system, involving expression of glycerol-3-phosphate dehydrogenase in the yeast Pichia pastoris, for generating sufficient quantities of the enzyme in order to asses its potential value for use in various food bioanalytical determination. Dehydrogenases have been widely used in the enzymatic assays of diverse composites of industrial interest, being enclosed among them glycerol and a number of important bioanalytical applications.

Pejibaye palm (Bactris gasipaes) propagative structures and seedlings morphological study

Palm of Arecoideae subfamily, the pejibaye palm occurs mostly at Tropical America areas, and has achieved outstanding economic importance for heart-of-palm production with traditional farming. This work aimed to describe and record propagation structures and seedlings, throughout the different stages of their germination process, since this species is mainly propagated by seeds. The seeds were set for germination on trays with cotton and sterilized water. Representative samples were taken out from each of the different germination stages. They were photographed and drafted using a clear chamber. The propagation structures and seeds external surface were outlined and photographed. The seeds were longitudinally cut for observation and documentation of the inner morphology. The first germinative event was the growth of an undifferentiated, approximately globular cells mass, which emerged from the micropilar depression. Then, the cells mass acquired a cylinder aspect, with the early shoot and root differentiation taking place. Later, there was evidence of primary root and aerial portion. This shoot was coated by a closed and chlorophylled sheath. A lateral root outgrown at the primary root's base and an adventitious root became visible at the embryonic axis. Three other sheaths evolved at the shoot, unrolling one at a time, allowing, finally, the emergence of the primary leaf which is bifid and has parallel veins, typical of its family. Internally, an haustorial structure was developed and seemed to be related with the digestion of the endosperm, occupying, gradually, all the seed's internal space.

Analysis of chromatin and nuclear area alterations in triatomines during starvation

In the present study changes in nuclear area and chromatin distribution in the Malpighian tubules of a blood-feeding insect, the vector of Chagas' disease were analysed. Male and female adult insects were dissected, after a starving period of up to 28 days. The Malpighian tubules were fixed and stained by orcein lacto-acetic. The nuclei were analyzed by photomicrography, karyometry and a statistical analysis was performed. It was observed that with the increase of the starvation period there were alterations in the nuclear phenotype, that is, changes in the nuclear area and chromatin extenuation. In males, starting from the second week of starvation, chromatin extenuation was accentuated, and the beginning of nuclear coalition occurred more frequently in the third and fourth starvation weeks. In females, the accentuated chromatin extenuation was observed after the third starvation week, and irregularities in nuclear borders were more frequent. The descriptive statistical analysis of the male and temale nuclear areas revealed that the nuclear areas continued to increase during starvation reaching highest values in the third week. Another outstanding aspect is that in the third starvation week karyometry presented larger heterogeneity with higher standard deviation values for both genders. Therefore, nuclear alterations related to the distribution and extenuation chromatin and increase in nuclear area were observed. These aspects suggest the presence of nuclear metabolic mechanisms that lead to synthesis of specific proteins necessary for the protection and maintenance of the cell during physiologic stress.

Polymerization shrinkage evaluation of three packable composite resins using a gas pycnometer.

Modern restorative dentistry has been playing an outstanding role lately since composite resins, allied to adhesive systems, have been widely applied on anterior and posterior teeth restorations. The evolution of composite resins has mostly been verified due to the improvement of their aesthetic behavior and the increase in their compressive and abrasive strengths. In spite of these developments, the polymerization shrinkage inherent to the material has been a major deficiency that, so far, has been impossible to avoid. Using a gas pycnometry, this research investigated the polymerization shrinkage of three packable composite resins: Filtek P60 (3M), Prodigy Condensable (Kerr), and SureFil (Dentsply/Caulk), varying the distance from the light source to the surface of the resins (2 mm or 10 mm). The pycnometer Accupyc 1330 (Micromeritics, USA) precisely records helium displacement, allowing fast and reliable measurements of the volume of composite resin immediately before and after polymerization, without interference of temperature or humidity. Results were not found to be statistically different for the three tested resins, either for 2 mm or 10 mm-distance from the light source to the composite surface.

Ganho genético por diferentes critérios de seleção em populações segregantes de soja

In breeding programs, the complexity of economically outstanding characters, most of which highly influenced by the environment, makes selection difficult. Using genetic parameters, like heritability and gain with selection, it is possible to identify superior genotypes in early generations. Therefore, the aim of the present research was to compare different selection criteria by the estimated gains and the selected progenies, determining the superior and more similar methods. Augmented block design was used with three additional checks. Twelve hundred genotypes were evaluated. The most expressive expected gains were obtained with direct selection. However, the indices have shown to be more appropriate for selecting superior progenies because of their higher total gains, distributed among all the evaluated characters. The Sum of Ranks Index allowed the highest gains in most of the situations analysed.

Damping behavior of hygrothermally conditioned carbon fiber/epoxy laminates

Carbon fiber reinforced polymer composites have been used in wide variety of applications including, aerospace, marine, sporting equipment as well as in the defense sector due to their outstanding properties at low density. In many of their applications, moisture absorption takes place which may result in a reduction in mechanical properties even at lower temperature service. In this work, the viscoelastic properties, such as storage modulus (E′) and loss modulus (E″), were obtained through vibration damping tests for three carbon fiber/epoxy composite families up to the saturation point (6 weeks). Three carbon fiber/epoxy composites having [0/0] s, [0/90] s, and [±45] s orientations were studied. During vibration tests the storage modulus (E′) and loss modulus (E″) were monitored as a function of moisture uptake, and it was observed that the natural frequencies and E′ values decreased with the increase during hygrothermal conditioning due to the matrix plasticization. © 2007 Wiley Periodicals, Inc.

Composição e digestibilidade in vitro de genótipos de capim-elefante, aos 56 dias de rebrota

Twelve elephant grass genotypes were evaluated in a randomized blocks design with three repetitions. The experimental parcel was of 4 lines with 3m of length, spaced of 1 m and fertilized with 100 kg of P2O5, 100 kg of N, 60 kg of K2O and 25 kg of micronutrients/ha. Significant differences were observed among the genotypes for neutral detergent fiber (FND), acid detergent fiber (FAD) and lignin. The genotypes CNPGL 92-70-02, CNPGL 91-25-01 and CNPGL 93-32-02 showed low values for FND, FAD and lignin, simultaneously, outstanding between the others. There were no significant differences in the levels of dry matter and crude protein contents and in in vitro dry matter digestibility between the genotypes.

Fatigue behaviour study on repaired aramid fiber/epoxy composites

Aramid fiber reinforced polymer composites have been used in a wide variety of applications, such as aerospace, marine, sporting equipment and in the defense sector, due to their outstanding properties at low density. The most widely adopted procedure to investigate the repair of composites has been by repairing damages simulated in composite specimens. This work presents the structural repair influence on tensile and fatigue properties of a typical aramid fiber/epoxy composite used in the aerospace industry. According to this work, the aramid/epoxy composites with and without repair present tensile strength values of 618 and 680MPa, respectively, and tensile modulus of 26.5 and 30.1 GPa, respectively. Therefore, the fatigue results show that in loads higher than 170 MPa, both composites present a low life cycle (lower than 200,000 cycles) and the repaired aramid/epoxy composite presented low fatigue resistance in low and high cycle when compared with non-repaired composite. With these results, it is possible to observe a decrease of the measured mechanical properties of the repaired composites.

Back to school with tablets embedded in digital desks

A digital-desk pilot program, named One Laptop Per Child (OPLC), in Brazil uses a unique display design to provide an interactive interface developed to enhance education and minimize ergonomic concerns. The one-to-one computer strategy as proposed by Nicholas Negroponte is a way of circumventing the tragedy of the locked computer lab because it gives children full access to computers anytime. The OLPC program has focused on a solution that minimizes power consumption, which also limits the display's maximum size and processor performance because the LCD backlights are responsible for a significant part of the power consumption in laptops. The government has also developed a new type of low-cost tablet that is based on a resistive principle. High transparencies can be obtained in the 90% range in the tablet, while robustness is guaranteed by the outstanding tribological characteristics of Sn02 on glass.

Existe utilização efetiva dos recursos vegetais conhecidos em comunidades caiçaras da Ilha do Cardoso, estado de São Paulo, Brasil?

This study aims to investigate if plant resources are effective used by caiçaras' communities of the Cardoso Island. We also want to verify if the biogeografic origin of plants, their uses and socioeconomic factors influence the locals' knowledge. We carried out 51 semi-structured interviews with people who have been living there for at least 5 years, who were older than 18. We concluded that the interviewees' knowledge is still diverse and that most of the plants known are used by them (82%). Native plants are largely known, while the exotic ones are the most used (95%). Knowledge and use vary according to the use of plants, although they were very similar, considering the interviewees' age and gender. We also realized that housewives use a large quantity of medicinal plants, which are mainly the exotic ones. Fishermen know and use native plants, usually for handicraft purposes. The environmental guides and people, whose job is tourism related, have a similar knowledge, especially about medicinal plants, which are less used when compared with the other professional activities.

Estimativas de parâmetros genéticos para caracteres quantitativos em progênies de polinização aberta de Eucalyptus urophylla

Eucalyptus urophylla S. T. Blake is outstanding for valuable wood production potential, adaptation plasticity for different environmental conditions, and for tolerance to canker. However, genetic improvement of this specie in Brazil depends on the existence of genetic variability in the introduced populations. The objective of this study was to investigate the genetic variation and gains in quantitative traits in a population established in 1992 in Selvíria - MS. The progeny trial was established in a partially balanced, 8 x 8 lattice design, with 64 families, collected at Anhembi Experimental Station (IPEF/ESALQ/USP). Each plot was made up of eight trees planted in a 3 × 3 m spacing. Significant among families genetic variations were observed in diameter at breast height (DBH), bark type, stem form, and survival. Estimates of average family heritability were high for all traits, ranging from 0.50 to 0.85. The simulated selection by using multi-effect index showed that under a varying number of plants per family. This method is the most indicated to maximize genetic gains (7.24%) and the effective population size (69.3). These results are a useful support for the transformation of this test into a seedling seed orchard and to become a source of vegetative material to build a clonal seed orchard.

Transmission network expansion planning considering phase-shifter transformers

This paper presents a novel mathematical model for the transmission network expansion planning problem. Main idea is to consider phase-shifter (PS) transformers as a new element of the transmission system expansion together with other traditional components such as transmission lines and conventional transformers. In this way, PS are added in order to redistribute active power flows in the system and, consequently, to diminish the total investment costs due to new transmission lines. Proposed mathematical model presents the structure of a mixed-integer nonlinear programming (MINLP) problem and is based on the standard DC model. In this paper, there is also applied a specialized genetic algorithm aimed at optimizing the allocation of candidate components in the network. Results obtained from computational simulations carried out with IEEE-24 bus system show an outstanding performance of the proposed methodology and model, indicating the technical viability of using these nonconventional devices during the planning process. Copyright © 2012 Celso T. Miasaki et al.

Psychosocial factors for risk and protection to child malnutrition in mothers of malnourished and eutrophic children: the role of maternal mental health

In this study, the relationship between child malnutrition, depression, anxiety and other maternal socio-demographic variables was investigated in mothers of malnourished (MD) and eutrophic (ME) children. The causes attributed by mothers to malnutrition were also studied. Ten mothers from each group, with children aged from 11 months to three years and who were users of primary health care units, participated in the study. They answered Beck depression and anxiety inventory, a questionnaire on vital events and an open question concerning the causes of malnutrition. The evaluation instruments were corrected according to proper guidelines and comparative analyses between the groups were performed. The answers to the open question were qualitatively evaluated, submitted to content analysis. The mothers in the two groups were nearly 30 years old or older. They had a steady partner and were subject to very similar life conditions. They had attended school for 5.5 years and were housewives or worked in low-income jobs. Concerning mental health indicators, a significantly larger number of mothers in the MM group showed depression indicators when compared to mothers in the EM group. Most mothers attributed malnutrition to biological factors or to the lack of maternal care, with more moralist statements in the EM group, and statements filled with guilt in MM. Results suggest that in order to fight malnutrition, in addition to nutritional interventions, it is necessary to heed attention to maternal socio-emotional issues.

Cranial osteology of Picini (Aves: Piciformes: Picidae)

The Picini is composed of 26 species of woodpeckers from the old world that are grouped into seven genera. Given the absence of detailed studies on the cranial osteology of the Picini, the purpose of this study is to describe the cranial osteology of 14 species of Picini from six genera and to compare these species with each other, with other species of woodpeckers and with other bird groups. The results of the analysis of the bone structures of the skull of the Picini indicate that there are seven outstanding characteristic of bones involved in the functional mechanistics of the jaw apparatus. In the ossa cranii, these include the frontal overhang, the postorbital process, the extension of the parietal versus the frontal region and the temporal fossa. In the ossa faciei, these include the rostral expansion of the pterygoid, the ventral palatine fossa and the orbital process of the quadrate bone. For all of the structures associated with the cranial osteology of the investigated species, there is a clear distinction between the species of the genus Picus and the other species studied. Blythipicus rubiginosus, Chrysocolaptes lucidus, Reinwardtipicus validus, Gecinulus viridis and the species of the genus Dinopium exhibit additional particularities. © 2012 The Royal Swedish Academy of Sciences.

The no-tillage system and cover crops-Alternatives to increase upland rice yields

Upland rice (Oryza sativa L.) cultivation has been increasing in importance in Asia while water availability for irrigation has been decreasing because of rapid growth in industry and urban centers. Therefore, the development of technologies that increase upland rice yields under aerobic conditions, thereby saving water, would be an effective strategy to avoid a decrease in global rice grain production. The use of the no-tillage system (NTS) and cover crops that maintain soil moisture would prove advantageous in the move toward sustainable agriculture. However, upland rice develops better in plowed soil, and it has been reported that this crop does not perform well under the NTS. Therefore, the aim of this study was to investigate the effect of cover crops on upland rice grain yield and yield components sowed in a NTS. A field experiment was conducted during two growing seasons (2008-2009 and 2009-2010), and treatments consisted of growing rice under five cover crops in a NTS and two control treatments under the conventional tillage system (plowing once and disking twice). Treatments were carried out in a randomized block design with three replications. Our findings are as follows: On average, Brachiaria brizantha (12.32Mgha-1), Brachiaria ruziziensis (11.08Mgha-1) and Panicum maximum (11.62Mgha-1) had outstanding biomass production; however, these grasses provided the worst upland rice yields (2.30, 2.04, and 2.67Mgha-1, respectively) and are not recommended as cover crops before upland rice. Millet and fallow exhibited the fastest straw degradation (half-lives of 52 and 54 days, respectively), and millet exhibited the fastest nitrogen release (N half-life of 28 days). The use of a NTS was promising when millet was used as a cover crop; this allowed the highest upland rice yield (3.94Mgha-1) and did not statistically differ from plowed fallow (3.52Mgha-1). © 2012 Elsevier B.V.