Soil Solution as Affected by Plant Residues and Nitrogen Rates

Cation mobility in acidic soils with low organic-matter contents depends not only on sorption intensity but also on the solubility of the species present in soil solution. In general, the following leaching gradient is observed: potassium (K+) magnesium (Mg2+) calcium (Ca2+) aluminum (Al3+). To minimize nutrient losses and ameliorate the subsoil, soil solution must be changed, favoring higher mobility of M2+ (metal ions) forms. This would be theoretically possible if plant residues were kept on the soil surface. An experiment was conducted in pots containing a Distroferric Red Latosol, with soil solution extractors installed at two depths. Pearl millet, black oat, and oilseed radish residues were laid on the soil surface, and nitrogen (as ammonium nitrate) was applied at rates ranging from 0 to 150mgkg-1. Corn was grown for 52 days. Except for K+ and ammonium (NH4 +), nitrogen rates and plant residues had little effect upon the concentrations and forms of the elements in the soil solution. Presence of cover crop residues on soil surface decreased the effect of nitrogen fertilizer on Ca leaching. More than 90% of the Ca2+, Mg2+, and K+ were found as free ions. The Al3+ was almost totally complexed as Al(OH3)0. Nitrogen application increased the concentrations of almost all the ions in soil solution, including Al3+, although there was no modification in the leaching gradient.

MONITORING NITROGEN NUTRITION IN COTTON

Both N excess and deficiency may affect cotton yield and quality. It would therefore be useful to base the N management fertilization on the monitoring of the nutritional status. This study investigated the correlations among the following determination methods of the N nutritional status of cotton (Gossypium hirsutum L., var. Latifolia): chlorophyll readings (SPAD-502 (R), Minolta), specific-ion nitrate meter (Nitrate Meter C-141, Horiba-Cardy (R)), and laboratory analysis (conventional foliar diagnosis). Samples were taken weekly from two weeks before flowering to the fifth week after the first flower. The experiment was conducted on the Fazenda Santa Tereza, Itapeva, State of São Paulo, Brazil. The crop was fertilized with 40 kg ha(-1) N at planting and 0, 30, 60, 90, and 120 kg ha(-1) of side-dressed N. The range of leaf N contents reported as adequate for samples taken 80-90 days after plant emergence (traditional foliar diagnosis) may be used as reference from the beginning of flowering when the plant is not stressed. Specific-ion nitrate meter readings can be used as a nutritional indicator of cotton nutrition from one week after pinhead until the third week of flowering. In this case, plants are well-nourished when readings exceed 8,000 mg L(-1) NO(3)(-). The chlorophyll meter can also be used to estimate the nutritional status of cotton from the third week of flowering. In this case the readings should be above 48 in well-nourished plants.

Plant density and nitrogen fertilization in Swiss chard

An experiment was conducted to evaluate the effect of plant spacing and nitrogen fertilization on Swiss chard's yield, from September to November 2009. The experimental design was of randomized blocks in split plot with four replications. In the plots were allocated the two plant spacings (0.30 and 0.50 m) and in the subplots the five doses of nitrogen (0, 40, 80, 120 and 160 kg ha(-1)). The crop was harvested 90 days after transplanting. The plant spacing of 0.50 m provided increased production of total fresh weight of shoot (961.7 g plant(-1)) and marketable (873.1 g plant(-1)). However, the highest total yield (77.8 t ha(-1)) and marketable (64.5 t ha(-1)) was achieved with the smaller spacing between plants (0.30 m). The N rates applied in coverage until 160 kg ha(-1) increased in a linear form the total and marketable production of fresh mass of shoots, the total and marketable yield, the N content and the N accumulation in the shoots of Swiss chard plants on the evaluated plant spacings.

Organic compounds from plant extracts and their effect on soil phosphorus availability

O objetivo deste trabalho foi avaliar o efeito de compostos orgânicos de extratos de plantas de seis espécies e da fertilização fosfatada na disponibilidade de fósforo no solo. Tubos de 30 cm de altura e 5 cm de diâmetro foram preenchidos com Latossolo Vermelho-Amarelo. Cada tubo constituiu uma parcela, em delineamento completamente casualizado, em arranjo fatorial 7x2, com quatro repetições. Extratos líquidos de aveia-preta (Avena strigosa), nabo forrageiro (Raphanus sativus), milho (Zea mays), milheto (Pennisetum glaucum), soja (Glycine max), sorgo forrageiro (Sorghum bicolor) e água (testemunha) foram aplicados em cada parcela, com ou sem fertilização com fosfato solúvel. Após sete dias de incubação, amostras de solo foram coletadas em várias profundidades, e foram analisadas as formas lábil, moderadamente lábil e não lábil de fósforo no solo. Houve acúmulo de fósforo inorgânico nas frações lábil e moderadamente lábil do solo, como conseqüência da adição dos extratos de plantas, principalmente na camada superficial (0-5 cm). O nabo forrageiro, com maior concentração de ácido málico e maior conteúdo de P no tecido do que outras espécies, foi o mais eficiente em incrementar a disponibilidade de P no solo.

The nitrogen sufficiency index underlying estimates of nitrogen fertilization requirements of common bean

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de mudas de abóbora com diferentes doses de nitrogênio e potássio

O experimento foi desenvolvido em ambiente protegido, em São Manuel (SP). O objetivo deste trabalho foi avaliar a produção de mudas de abóbora 'Menina Brasileira' em substrato à base de fibra de coco com diferentes doses de nitrogênio e potássio em fertirrigação. Utilizou-se o delineamento experimental em blocos ao acaso, com 16 tratamentos em esquema fatorial 4 x 4, sendo quatro doses de nitrogênio (0, 40, 80 e 120 mg L-1 de N) na forma de nitrato de amônio e quatro doses de potássio (0, 70, 140 e 210 mg L-1 de K2O ) na forma de cloreto de potássio, em quatro repetições e dez plantas por parcela. As características avaliadas foram: massa fresca e seca da parte aérea e raiz, altura e número de folhas. As doses de potássio não influenciaram as características avaliadas. Houve, porém, aumento linear para a maioria das características avaliadas com doses crescentes de nitrogênio, exceto para a massa seca da raiz.

Fertilizer distribution mechanisms and side dress nitrogen fertilization in upland rice under no-tillage system

Algumas culturas têm pouca adaptação ao sistema plantio direto (SPD), em vista da alta compactação da camada superficial do solo. Nesse caso, o mecanismo utilizado na semeadora para a abertura dos sulcos para deposição do fertilizante pode ter grande importância no sentido de facilitar a penetração das raízes. Avaliouse a influência do mecanismo de distribuição de fertilizante e da adubação nitrogenada na cultura do arroz de terras altas (Oryza sativa) no sistema plantio direto. O experimento foi conduzido nos anos agrícolas 2001/2002 e 2002/2003, em Botucatu-SP, Brasil. O delineamento experimental foi em blocos casualizados, com parcelas subdivididas e quatro repetições. As parcelas foram constituídas por dois mecanismos de distribuição de fertilizantes (haste sulcadora e disco duplo). Nas subparcelas, quatro níveis de N foram aplicados em cobertura (0, 40, 80 e 120 kg ha-1). Avaliou-se a profundidade de abertura do sulco e de deposição das sementes, a população de plantas, a altura de plantas, o número de colmos e de panículas m-2, o número total de espiguetas por panícula, a fertilidade das espiguetas, a massa de 1.000 grãos, a matéria seca da parte aérea, a produtividade e o teor de N na folha bandeira. O sucesso no estabelecimento da cultura do arroz de terras altas no SPD nas regiões de inverno seco do Brasil está diretamente ligado ao mecanismo de distribuição das semeadoras-adubadoras. A haste sulcadora promoveu maior profundidade de deposição de sementes, conseqüentemente reduzindo o estande, o número de panículas por área e a produtividade. A aplicação de N em cobertura no arroz de terras altas em SPD proporciona maiores produtividades quando a semeadura é realizada com mecanismo de disco duplo.

Exchangeable basic cations and nitrogen distribution in soil as affected by crop residues and nitrogen

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extraction methods and availability of phosphorus for soybean in soils from Parana State, Brazil

In studies on the evaluation of methodologies for the analysis of soil, phosphorus (P) has been the single most studied aspect, due to the complexity of this dynamic element in soil. However, these studies have been limited regarding soil conditions in Paranaa. The present study aimed to evaluate the efficiency of the Mehlich-1, Mehlich-3 and ion exchange resin methods in the evaluation of available P for soybean (Glycine max) in the soils of Paranaa State. Twelve soil samples collected from the upper 0-20 cm were planted with soybean for a period of 42 days in the greenhouse. The ability to extract soil P followed the order of decreasing average amount of extracted P: Mehlich-3 > resin > Mehlich-1. The correlation coefficients between the content of P extracted by Mehlich-1, Mehlich-3 and resin and the amount of P accumulated in the plants were 0.86, 0.90 and 0.93, respectively. Mehlich-1, Mehlich-3 and resin showed similar efficiency in the evaluation of P availability to plants and, under conditions of natural fertility and in soils that had received no application of poorly natural reactive phosphates, can be used to quantify the concentrations of P in the soils of Parana State.

Dinâmica de nutrientes na solução do solo em pomar fertirrigado de citros

O objetivo deste trabalho foi avaliar a dinâmica de nutrientes na solução do solo após a aplicação, via fertirrigação, de nitrogênio, fósforo e potássio a laranjeiras. O experimento foi realizado entre setembro de 2007 e outubro de 2009, em pomares de laranjeiras 'Valência' e 'Hamlin', enxertadas sobre citrumeleiro 'Swingle'. Foram avaliadas cinco doses de N, P2O5 e K2O (0, 25, 50, 100 e 200% da dose recomendada). A solução do solo foi extraída a 30 e 60 cm de profundidade, com o auxílio de extratores com cápsulas porosas. Foram realizadas 11 avaliações durante o período experimental, com as extrações iniciadas após 12 horas das fertirrigações. O aumento das doses reduziu o pH (pH~3,5, na maior dose), e aumentou a condutividade elétrica (CE~1,5 dS m-1, na maior dose) e os teores de NH4, NO3, P, K, Mn e Zn na solução do solo, nas duas profundidades amostradas. Nos meses com maior precipitação pluvial, houve perda potencial de nutrientes por lixiviação, pois maiores concentrações de NO3, K e B foram observadas à profundidade de 60 cm. A análise da solução do solo, obtida por extratores com cápsula de cerâmica porosa, pode ser considerada ferramenta auxiliar para monitorar e avaliar a disponibilidade de nutrientes às plantas.

Intermediate reactive oxygen and nitrogen from macrophages induced by Brazilian lichens

The activity of ten compounds isolated from Brazilian lichen over the release of hydrogen peroxide and nitric oxide was evaluated in the culture of peritoneal macrophage cells from mice. Salazinic, secalonic A and fumarprotocetraric acids were the compounds that induced the greatest release of H2O2, whereas 12R-usnic and diffractaic acids induced the release of NO. These results indicate that lichen products have potential immunological modulating activities. (C) 2004 Elsevier B.V. All rights reserved.

Determination of the oxygen and nitrogen interstitial diffusion coeficient in niobium by mechanical spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diffusion of Nitrogen in Ti-13V-11Cr-3Al Alloys

Metals with a bcc crystalline structure such as Ti-13V-11Cr-3Al alloys have their physical properties significantly changed through the addition of interstitial elements such as oxygen and nitrogen. These metals can dissolve substantial amounts of interstitial elements forming solid solutions. Mechanical spectroscopy measurements constitute a powerful tool for studying interactions of these interstitial elements with other elements that make up the alloy. From these measurements, it is possible to obtain information regarding diffusion, interstitial concentration, interaction between interstitials, and other imperfections of the crystalline lattice, In this paper, Ti-13V-11Cr-3Al alloys with several amount of nitrogen, in a solid solution, were studied using mechanical spectroscopy (internal friction) measurements. The results presented complex internal friction spectra which were resolved in a series of constituent Debye peaks corresponding to different interactions and interstitial diffusion coefficients. Pre-exponential factors and activation energies were calculated for nitrogen in theses alloys.

Nitrogen diffusion in the Nb-1.0wt%Zr measured by mechanical spectroscopy

The scientific and technological development in the area of new materials contributed to several applications of niobium and its alloys in nuclear power plants as well as in aerospace, aeronautics, automobile and naval industries. This paper presents the interstitial diffusion coefficients of nitrogen in solid solution in the Nb-1.0wt%Zr alloy using internal friction measurements obtained by mechanical spectroscopy, which uses a torsion pendulum operating at an oscillation frequency between 1.0 Hz and 10.0 Hz. The temperature range varies from 300K to 700K, at a heating rate of 1 K/min and vacuum better than 2 x 10(-6) Torr. The results showed an increase of the interstitial diffusion coefficient of nitrogen that was correlated with configurational considerations for the octahedral interstitials.

Diffusion of Oxygen and Nitrogen in the Ti-15Mo Alloy used for Biomedical Applications

The Ti-15Mo alloy is a promising material for use as a biomaterial because of its excellent corrosion resistance and its good combination of mechanical properties, such as fatigue, hardness, and wears resistance. This alloy has a body-centered predominantly cubic crystalline structure and the addition of interstitial atoms, such as oxygen and nitrogen, strongly alters its mechanical properties. Mechanical spectroscopy is a powerful tool to study the interaction of interstitial elements with the matrix metal or substitutional solutes, providing information such as the distribution and the concentration of interstitial elements. The objective of this paper is to study of the effects of heavy interstitial elements, such as oxygen and nitrogen, on the anelastic properties of the Ti-15Mo alloy by using mechanical spectroscopy measurements. In this study, the diffusion coefficients, pre-exponential factors, and activation energies were calculated for the oxygen in the Ti-15Mo alloy.