Desenvolvimento de um sistema de análise de imagem para quantificação do tamanho e distribuição de partículas de desgaste

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da tenacidade à fratura na região de transição dúctil-frágil dos aços API 5L X70 e X80 utilizando a metodologia da curva mestra

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biologia e ecologia dos camarões de água doce Macrobrachium amazonicum (Heller, 1862) e Macrobrachium jelskii (Miers, 1778) (Crustacea: Caridea: Palaemonoidea) no Rio Grande, região de Planura. MG

Pós-graduação em Ciências Biológicas (Zoologia) - IBB

Morfometria de rainhas do gênero ATTA (Hymenoptera: Formicidae: Myrmicinae), arquitetura interna e infecção pelo fundo parasita Escovopsis de ninhos iniciais

Pós-graduação em Ciências Biológicas (Zoologia) - IBB

Avaliação do comportamento de superfícies de fratura por fractais mistos em materiais de diferentes classes

Pós-graduação em Engenharia Mecânica - FEG

Influência da potência de laser Nd: YAG na soldagem do aço inoxidável duplex UNS S32205

Pós-graduação em Engenharia Mecânica - FEIS

Aplicação de cavacos de titânio para produção de revestimentos resistentes ao desgaste

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do herbicida Glifosato (N-Fosfonometil)Glicina) na formação de biomassa da alga Pseudokirchneriella subcapitata (Chlorophyceae)

Herbicides are chemical agents most consumed for agricultural production and of these, glyphosate (N-(phosphonomethyl) glycine) represents more than half of world consumption of non-selective herbicides, use of systemic action and post-emergent. The present study aims to analyze the interference of different concentrations of glyphosate in the development of micro algae, unicellular species Pseudokirchneriella subcapitata, with supplementary analysis of the interference of green algae concentrations in the artificial lake Instituto de Biociências Universidade Estadual Paulista in Rio Claro, SP. To identify the effect of glyphosate on the development of microalgae concentrations: 0.118; 0.236; 0.472; 0.944; 1.888 and 3.776 mg of product (all in rejoinders), maintaining control without glyphosate, were inoculated into flasks containing 150mL of medium culture and 5mL of suspension inoculum levels. Each test was continued for 96 hours in a shaker rotating at 150 rpm at 25 / - 2 ° C and constant light of 3200 lux. At baseline and 48; 72 and 96 hours samples were taken for testing for absorbance. The final dry weight was measured and the tests with P. subcapitata cell number was quantified at the beginning and end of the tests using the Neubauer chamber under optical microscope. For algae of the artificial lake of the diversity of microalgae cells was identified through photographic documentation. The analysis of variance comparing treatments for dry biomass showed no significant differences in the tests with P. subicapitata as for the algae to the lake.The analysis of variance MANOVA showed significant differences between the treatments over time but there was no significant difference between the interactions of treatment for tests with P. subicapitata There were significant differences in the tests with microalgae of the artificial lake. With respect to cell quantification, it was found... (Complete abstract click electronic acces below)

Análise fractal de fraturas em regime linear elástico: modo I de carregamento

For the development of this graduate work of fractal fracture behavior, it is necessary to establish references for fractal analysis on fracture surfaces, evaluating, from tests of fracture tenacity on modes I, II and combined I / II, the behavior of fractures in fragile materials, on linear elastic regime. Fractures in the linear elastic regime are described by your fractal behavior by several researchers, especially Mecholsky JJ. The motivation of that present proposal stems from work done by the group and accepted for publication in the journal Materials Science and Engineering A (Horovistiz et al, 2010), where the model of Mecholsky could not be proven for fractures into grooved specimens for tests of diametric compression of titania on mode I. The general objective of this proposal is to quantify the distinguish surface regions formed by different mechanisms of fracture propagation in linear elastic regime in polymeric specimens (phenolic resin), relating tenacity, thickness of the specimens and fractal dimension. The analyzed fractures were obtained from SCB tests in mode I loading, and the acquisition of images taken using an optical reflection microscope and the surface topographies obtained by the extension focus method of reconstruction, calculating the values of fractal dimension with the use of maps of elevations. The fractal dimension was classified as monofractal dimension (Df), when the fracture is described by a single value, or texture size (Dt), which is a macroscopic analysis of the fracture, combined with the structural dimension (Ds), which is a microscopic analysis. The results showed that there is no clear relationship between tenacity, thickness and fractal values for the material investigated. On the other hand it is clear that the fractal values change with the evolution of cracks during the fracture process ... (Complete abstract click electronic access below)

Processamento do compósito de fibra de capim-sapê / epóxi e avaliação da resistência à flexão “t” de Student

In recent years a great worldwide interest has arisen for the development of new technologies that enable the use of products with less environmental impact. The replacement of synthetic fiber plants is a possibility very important because this fiber is renewable, biodegradable and few cost and cause less environmental impact. Given the above, this work proposes to develop polymeric composites of epoxy resin and study the behavior of these materials. Both, the epoxy resin used as matrix in the manufacture of sapegrass fiber composite, as tree composites formed by: epoxy/unidirectional sapegrass long fiber, 75% epoxy/25% short fiber, by volume, and 80% epoxy/20% short fiber, by volume, were characterized by bending, and the composites produced with short fibers random were inspected by Optical Microscopy and Acoustics Inspection (C-Scan). For the analysis of the sapegrass fiber morphology, composites 75% epoxy/25% short fiber (sheet chopped) and 80% epoxy/20% short fiber images were obtained by optical microscope and the adhesion between polymer/fiber was visualized. As results, the flexural strength of composites epoxy/unidirectional long fibers, 75% epoxy/25% short fiber and 80% epoxy/20% short fiber were 70.36 MPa, 21.26 MPa, 25.07 MPa, respectively. Being that composite showed that the best results was made up of long fibers, because it had a value of higher flexural strength than other composites analyzed

Efeito do Estrôncio (Sr) no tratamento de modificação do eutético da liga Al-1%Si

This study aimed to analyze the cooling curves, micro and macrograph alloy Al-1 %Si without the addition of strontium modifier and with the addition of the same. One of the ways of improving mechanical properties of alloy Al -Si is through the modification process. For the experiments two billets of the alloy Al-1%Si cast iron mold in a billet with addition of 0.02% strontium by weight, and the other billet without the addition of modifier were fused. In the solidification process of billet temperature was monitored and recorded every second for later plotting in Origin 8 program and analyzes the cooling curves obtained. The billets were cut and passed by grinding and polishing to perform the macrograph and micrographs. The results concerning the macrograph indicated that billet without the addition of Strontium particle size obtained was more refined than the billet where the strontium modifier was added. Regarding the micrograph, photos stemmed from the optical microscope didn´t show the expected modification effect by the addition of Strontium. This suggests that the low amount of silicon (1 %) present in the alloy used in this study interfered in the change process, because according to the literature review, Strontium 0.022 % by weight is sufficient to fully modify an alloy with 7% Silicon. The results from the cooling curve showed that both the eutectic temperature and the solidification time remained unchanged with the addition of strontium

Histologia comparada de brânquias, fígado e sangue em peixes da espécie Prochilodus lineatus, expostos a águas contaminadas

Os estudos hematológicos das diferentes espécies de peixes são de interesse ecológico e fisiológico, auxiliando na compreensão da relação entre as características sanguíneas, a filogenia, a atividade física, o hábitat e a adaptabilidade dos peixes ao ambiente. No experimento realizado foram testados os efeitos de águas contaminadas em parâmetros hematológicos de peixes da espécie Prochilodus lineatus, em períodos de coleta de 7 e 20 dias, nos quais o sangue foi coletado com seringas heparinizadas, foram montadas lâminas de esfregaço , as quais foram coradas pelo corante de Leishman. Estas lâminas foram analisadas e fotografadas com o auxílio de um microscópio óptico Leica, no qual foram feitas contagens totais de células brancas e contagens diferenciais de trombócitos e leucócitos, para a análise estatística. O grupo exposto ao Lago Azul apresentou uma elevação no número de leucócitos e no total de células brancas, evidenciando que os contaminantes químicos do ambiente estavam atuando de forma semelhante a um antígeno no corpo do animal fazendo com que suas células de defesa se proliferassem. Quanto ao grupo exposto ao detergente, observou-se que após os vinte dias de experimento ocorreu uma diminuição no número de trombócitos. Tais resultados evidenciam que a variação no número de leucócitos apresentou-se como um indicador de poluição ambiental e que os detergentes biodegradáveis podem em certo tempo de exposição ocasionar um déficit em funções vitais de peixes como à coagulação e a prevenção contra infecções, eventos ligados diretamente com os trombócitos. A maioria dos vertebrados aquáticos possui brânquias, estruturas especializadas nas trocas gasosas e responsáveis por grande parte das trocas iônicas. Este órgão acaba por absorver grande parte das substâncias presentes na água, que ao caírem na...(Resumo completo, clicar acesso eletrônico abaixo)

Fractografia quantitativa e o conceito de tenacidade à fratura para a análise do efeitodo choque térmicos em TiO2

The present study evaluated the use of semicircular bending test (SCB) as an alternative to conventional bending test to examine the effect of thermal shock. Still, studies the behavior of fracture surfaces generated by monofractal behavior analysis, which allows us to evaluate the contributions of the microstructure and the mechanical context in forming reliefs during the crack propagation. The fractal analysis is made from elevation maps obtained by reconstruction method by extension of the focus stacks of digital images acquired in microscope. The specimens used were samples semicircular pressed TiO2 (rutile) with and without heat shock, prepared for testing mode I loading. Were also produced, specimens in the form of bars for Weibull statistical analysis. From the three-point bending test, we found the variation of fracture toughness between the samples after the heat shock and natural condition. The SCB test was feasible for the analysis of thermal shock resistance. The results showed that the value of the fracture toughness decreases as the heat shock treatment

Expansão ex vivo de células uroteliais em scaffolds 3D

Malformations and possible damages to the urogenital system can be originated in the embryonic period. Moreover, fire guns, knives and accidents, where there is the disruption of the urethra, also cause these lesions. The objective was to analyze the contribution of tissue engineering in the construction of neo-urethra, developed by bioengineering. We performed an urothelial ex vivo expansion of cells in 3D scaffolds (platelet gel matrix and acellular porcine aorta) to assess the contribution of this technique in the construction of a neo-urethra. Mechanical dissociation was made of the inner wall of 10 North Folk rabbit’s bladder, weighing 2.5 to 3.0 kg. After dissociation the cell content was centrifuged and obtained a pellet of urothelial cells. The pellet was ressuspended in culture medium DMEM F12 and cells were maintained in culture for 15 days. Immunohistochemical analysis characterized the urothelial culture. The cells were then implanted in the scaffold - platelet gel. In a second experiment using aortic porcine acellular matrix were implanted urothelial cells alone and urothelial cells on platelet gel, on the inner wall of the scaffold - aorta, with space for setting bordered by a urethral probe. The complex probe - cells - aorta and probe - cells in platelet gel - aorta, were sealed with suture material and culture were maintained in a humidified 37ºC incubator with 5% CO2 in air for 12 days to subsequent histological analysis of urothelium cell adhesion to the scaffolds. By observation under an optical microscope, we could see the growth of cells in the scaffold platelet gel, from a monolayer in to a three-dimensional structure. In the acellular porcine aortic matrix containing the platelet gel, we could observe a few quantity of urothelial cells adhered. However with the acellular porcine aortic matrix in which was implanted only the urothelial cells, we have obtained adhesion to the wall

Estudo do comportamento térmico e reológico de amidos na conformação cerâmica de compostos multicamada com alumina, titanato de alumínio e dióxido de titânio

The project aims to develop ceramic compounds with gradients of the mechanical properties, using the molding technique with commercial starches. To understand the process of interaction between starch and ceramic powders, the proposed methodology involves viscometry tests (up to 200 °C). Viscometric assays were carried out with slurries of alumina, titania and aluminum titanate with potato starch, cassava and corn. The specimens were tested for dilatometry, thermomechanical, thermal shock, mechanical and characterization by SEM. The ceramic powders and starches were analyzed using the optical microscope to measure the size of these. It was made of th kinetics of starch gelatinization and titania with the cornstarch in theoptical microscope to observe how the grains of starch behaved in welling