Estudio de la compactación de un Ferralsol manejado con un sistema de no laboreo en Selvíria (MS, Brasil)

No tillage management is widely used by the Brazilian farmers and technicians like a soil conservation system, which reduces the soil losses by water erosion, increasing the infiltrated and stored water in soil, warranting environmental sustainability. No-tillage system does not invert the soil; it causes the creation of a compacted layer. The samples were taken in the agricultural year 2005/2006 in an Oxisoil at Selviria (MS/Brazil). The tillage management in the last 15 years was no-tillage system with crop rotation (maize -Zea mays L./bean - Phaseolus vulgaris L.). The analyzed soil physical properties were bulk density (BS), gravimetric water content (U) and mechanical resistance to penetration (RP) at three depths: 0-0.10 m, 0.10-0.20 m and 0.20-0.30 m. The samples were taken in a mesh with 117 sampled points covering an area of 0.16 ha. It was investigated the existence of compacted soil layer, using the mechanical resistance to penetration to 0.60 m depth with soil water content at field capacity. The data shows low coefficient of variation, except the resistance penetration data. Bulk density and gravimetric water content has a normal distribution. Only resistance to penetration at 0.10-0.20 m depth layer has a normal distribution. The correlation between different properties was low. The bulk density increases with depth; the increase of the values of soil bulk density are consistent with data in other papers, indicating there are not compaction problems for the crop development at the study area. Most of the values of resistance to penetration are lower than 2 MPa, being this value restrictive for root development. The analysis of resistance to penetration profile 0 to 0.60 m shows a compacted layer between 0.20-0.30 m. This compacted layer was caused by the conventional tillage system used at this area before the use of no-tillage system. The soil bulk density has higher values at the upper area, that it shows higher values of soil compaction. Although the values of bulk density and resistance to penetration are high, the area does not show great problems of soil compaction.

Energia de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucalyptus grandis

The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.

Caracterização Tecnológica das Rochas Ornamentais do Maciço Capão Bonito, SP

The Capão Bonito Granitic Massif is situated in the south portion of the São Paulo State and represents an elongate body with general direction NE-SW, intrusive in epimetamorphic rocks of Açungui Group (Votuverava Formation), and in granitic rocks of the Três Córregos Complex. It is partially covered by sedimentary rocks of the Paraná Basin (Itararé Group). As the chief type we have red sienogranite, holo to leucocratic with biotite and rare hornblende, inequigranular with medium to coarse grains to porphiritic and isotropic to slightly cataclastic textures of marginal zones. This granite was analyzed for petrographics (composition, structure and texture), chemical composition (major elements), physical and mechanical (water absorption, resistance to abrasion, impact of hard body and efforts of compression and traction) and chemical attack aspects. The results were compared to suggested values for granitic rocks used for ornamental purposes. The whole massif shows compositional, textural, structural (related to isotropy) and chemical (major elements) characteristics very homogeneous. The varieties of sienogranite named commercially as Capão Bonito or Rubi Red Granite showed results very similar to each other, with some variations in the physical and mechanical resistance resulting of the penetrative brittle deformation of regional occurrence, evidenced by differences in the microfissural index.

Effect of green machining on distortion and surface finishing in advanced ceramic

An alternative for grinding of sintered ceramic is the machining on the green state of the ceramic, which presents easy cutting without the introduction of harmful defects to its mechanical resistance. However, after sintering there are invariably distortions caused by the heterogeneous distribution of density gradients, which are located in the most outlying portions of the compacted workpiece. In order to minimize these density gradients, this study examined the influence of different allowance values and their corresponding influence in distortion after sintering alumina specimens with 99.8 % purity by turning operation using cemented carbide tool. Besides distortion, other output variables were analyzed, such as tool wear, cutting force and surface roughness of green and sintered ceramics. Results showed a distortion reduction up to 81.4%. Green machining is beneficial for reducing surface roughness in both green and sintered states. Cutting tool wear has a direct influence on surface roughness and cutting force.

Atmospheric plasma treatment of carbon fibers for enhancement of their adhesion properties

Plasma processing of carbon fibers (CFs) is aimed to provide better contact and adhesion between individual plies without decrease in the CF mechanical resistance. This paper deals with surface modification of CFs by an atmospheric pressure dielectric barrier discharge (DBD) for enhancing the adhesion between the CF and the polymeric matrix. The scanning electron microscopy of the treated samples revealed many small particles distributed over entire surface of the fiber. These particles are product of the fiber surface etching during the DBD treatment that removes the epoxy layer covering as-received samples. The alteration of the CF surface morphology was also confirmed by the Atomic force microscopy (AFM), which indicated that the CF roughness increased as a result of the plasma treatment. The analysis of the surface chemical composition provided by X-ray photoelectron spectroscopy showed that oxygen and nitrogen atoms are incorporated onto the surface. The polar oxygen groups formed on the surface lead to the increasing of the CF surface energy. The results of interlaminar shear strength test (short beam) of CFs/polypropylene composites demonstrated a greater shear resistance of the composites made with CFs treated by DBD than the one with untreated fibers. Both the increase in surface roughness and the surface oxidation contribute for the enhancement of CF adhesion properties. © 2012 IEEE.

Titanium in Dentistry: Historical development, state of the art and future perspectives

Titanium is a metallic element known by several attractive characteristics, such as biocompatibility, excellent corrosion resistance and high mechanical resistance. It is widely used in Dentistry, with high success rates, providing a favorable biological response when in contact with live tissues. Therefore, the objective of this study was to describe the different uses of titanium in Dentistry, reviewing its historical development and discoursing about its state of art and future perspective of its utilization. A search in the MEDLINE/PubMed database was performed using the terms 'titanium', 'dentistry' and 'implants'. The title and abstract of articles were read, and after this first screening 20 articles were selected and their full-texts were downloaded. Additional text books and manual search of reference lists within selected articles were included. Correlated literature showed that titanium is the most used metal in Implantology for manufacturing osseointegrated implants and their systems, with a totally consolidated utilization. Moreover, titanium can be also employed in prosthodontics to obtain frameworks. However, problems related to its machining, casting, welding and ceramic application for dental prosthesis are still limiting its use. In Endodontics, titanium has been used in association to nickel for manufacturing rotatory instruments, providing a higher resistance to deformation. However, although the different possibilities of using titanium in modern Dentistry, its use for prostheses frameworks still needs technological improvements in order to surpass its limitations. © 2012 Indian Prosthodontic Society.

Variabilidade espacial da resistência mecânica do solo à penetração e umidade do solo em área cultivada com cana-de-açúcar na região de Humaitá, Amazonas, Brasil

The mechanical resistance to penetration (RP) is an attribute indicator of compaction was influenced by soil moisture. The objective of this study was to evaluate the spatial variability of soil resistance to penetration and soil moisture on area under cultivation of sugar cane in the region of Humaitá, Amazonas, Brazil. We conducted a sampling grid of 70x70 m where points were scored at regular intervals of 10 m, a total of 64 points. Soil samples were collected at depths of 0.00 to 0.15 m, 0.15 to 0.30 I 0.30 to 0.45 m for determination of soil moisture and soil resistance to penetration in the field. After analysis of these data analyzes were descriptive statistics and geostatistics. We conclude that all the variables studied showed spatial dependence and range values were higher than stipulated by the sampling grid and the RP and soil moisture showed a spatial relationship where lower values of PR concentrated on smaller values of soil moisture.

Zinc sulphate administered by transdermal iontophoresis improves breaking strength of surgical wounds in skin of alloxan-induced diabetic rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade e perdas de amendoim em cinco diferentes datas de arranquio

The harvest is a critical time in the production of the peanut (Arachis hypogaea L.), however in this operation losses are inevitable, in some cases o f up to 30% of production. Peanuts are grown for a short period during the reform of the sugarcane fields, providing better usage of the agricultural spaces in Jaboticabal, São Paulo. The objective of this research was to see how early the peanuts could be dug up once they are seen to have matured. The peanuts were dug up at 120, 125, 130, 135 and 140 days after sowing. Results were subjected to variance analysis by the F-test, and when there was significance of the averages, the Tukey test at 5% probability was applied, using a box plot for the following variables: maturation, moisture content of pods and soil, mechanical resistance of soil to penetration, harvest loss and productivity. The box plot proved efficient in the univariate evaluation of the analyzed variables, creating excellent conditions for viewing their behavior. Digging up the peanuts at 120 DAS is recommended.

Efeito da corrente elétrica contínua isolada e da iontoforese transdermal, associada ao zinco, sobre a resistência mecânica e o conteúdo de hidroxiprolina de cicatrizes realizadas na pele de ratos diabéticos aloxânicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do treinamento físico e destreinamento sobre o tecido ósseo de ratos Wistar submetidos à dieta hiperlipídica

Pós-graduação em Fisioterapia - FCT

Desempenho de trator agrícola em duas profundidades de escarificação e dois teores de água no solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Milho para silagem: semeadura e colheita em Latossolo sob preparo convencional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade espacial da resistência mecânica do solo à penetração em áreas mecanizadas de cana-de-açúcar (Saccharum officinarum)

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Encapsulamento do cromo proveniente do lodo de curtume, em matrizes de cimento, visando a resistência mecânica à compressão e os limites de lixiviação e solubilização

Pós-graduação em Ciência e Tecnologia de Materiais - FC