Projeto e construção de um dispositivo para testes em coluna vertebral

Pós-graduação em Engenharia Mecânica - FEG

Interferência do método de previsão populacional no desempenho hidráulico de uma rede coletora de esgoto sanitário

The non existence of sewage services creates an unhealthy environmental, causing impact extremely prejudicial to the human health. In Brazil, this item represents the biggest deficit in the basic sanitation these days, and only about 50% of the population is attended. The sewage collection network is a needful system for the basic sanitation. Between the parameters of the project of a system of collection and sewage transportation, the definition of the population that will be attended is one of the most important variables, and that should be done based on criterion of population growth and in accordant to directrix presents in the comprehensive city plan. In this paper, were evaluated methods of growth based on the geometric growth rate, on the population density and on the number of residents per dwelling, and also mathematics models of growth prediction, emphasizing in the geometric growth and on the logistic curve method. That way, the goal of this paper were value the hydraulic performance in one of the watersheds delimited by the sewage network magnification work existent in the city of Cacoal–RO. Using simulation with different scenarios, the results pointed that the hydraulic performance of the system were strongly affected by the population determination method used. For the same drained area the diameters range from 150 to 250 mm as well as the trench’s deep, where some stretches exceeded the maximum values contained in the standard. Besides, the variation of the sewage contribution rate due the population variation estimated in different scenarios, led to alterations in others important project parameters, such as slope, shallow pool, tensile stress and spreading velocity

Uma abordagem de multiagentes brownianos para a modelagem e simulação da dinâmica das populações no contágio da esquistossomose

Não disponível

Efeito do exercício prévio na determinação da potência crítica

The objective of this study was to analyze the influence of previous exercise on the determination of critical power (CP). Seven apparently healthy nontrained males, of 18 to 25 years, participated of this study. The subjects were submitted, in different days to the following protocols in a cyclergometer: 1) one progressive test until voluntary exhaustion for the determination of lactate threshold (LL), maximal oxygen uptake (VO2max) and its corresponding intensity (IVO2max); 2) six constant workload tests at 95,100 and 110% IVO2max until exhaustion with and without a previous exercise at 70% , in random order. The exhaustion times (tlim) at 95, 100 and 110% IVO2max were adjusted forme thress models of two parameters to estimate CP and anaerobic work capacity (AWC) [P=CTAn/tlim)+CP; tlim = CTAn/(P-PC); P=PC.tlim+ CTAn]. The model with the lowest standard error was considered for the estimation of CP. The tlim at 95% IVO2max was similar without (501 ± 140 s) and with previous exercise (473 ± 99 s). However, the tlim at 100% (381 ± 103 s and 334 ± 101 s) and 110% IVO2max (267 ± 163 s and 227 ± 68 s) was significantly longer with previous exercise. There was no significant difference in CP and AWCat conditions without (200 ± 27 W and 23 ± 11 kJ, respectively) and with previous exercise (212 ± 30 W and 18 ± 8 kJ, respectively). It can be concluded that the parameters of the relationship between power and time were not modified by the previous severe exercise

Um Modelo Espacial para a Resposta Imunológica Adaptativa da Hepatite B

This paper proposed a two-dimensional spatial model to describe the adaptive immune response for viral hepatitis B. This model considered six populations: healthy hepatocytes T, infected hepatocytes Y , hepatitis B virus V , innate immune system I, active immune system X and memory cells, X. First, a compartmental model was constructed and its equilibrium solutions and also the threshold values related to the stability of each solution were obtained. Using this model, we was able to reproduce the different trends observed for the disease, which are: individuals that eliminate the infection without forming immune response, patients with acute and chronic carriers. By including dispersion of defense cells of the immune system and virus (spatial model), we analyze two situations: homogeneous model, in which the model parameters are the same at all points of the network, and heterogeneous model, which characterizes cells more permeable and less permeable to virus invasion. For the two spatial models (homogeneous and heterogeneous) the times relatead to the viral erradication and/or virus invasion and persistence becoming smaller in relation to the compartmental model. The results also showed that for the set of values used in the simulations and if the two diffusion rates are different from zero, the model is sensitive to variations in the rate of viral spread and not dependent on the dispersion of memory cells. Finally, the heterogeneous model when compared to the homogeneous model shows that the infection can be spatially limited depending on the type of the cell involved in the infection process

Efeito do pacing e do exercício prévio na performance aeróbia

The aim of this study was to analyze the influence of prior exercise on different intensity distribution strategies (pacing). The study included five male individuals, apparently healthy, aged between 18 and 25 years, and without regular practice of physical activities. The subjects were tested on different days following the protocols on a cycle ergometer: 1) a progressive ramp test, 2) three constant load tests in the intensities of 85%, 90% and 95% IVO2max to exhaustion, and 3) six tests with and without holding a prior exercise intensity of 70%  with different strategies for Even-intensity pace, ES (401 ± 70 W), which consists of an exercise at a pace and / or constant intensity from beginning to end; where intensity is initially increased to 10% less than the ES progressively increase to reach 10% above the intensity of ES, and; Fast-start; FS, where there is a reversal in the way of distributing intensity, ie the initial intensity is 10% higher than the value of ES decreased progressively to 10% below that ES. All these tests were performed in random order. The tlim with previous exercise was significantly shorter than without previous exercise at FS condition (p < 0.05). The VO2final obtained at ES condition was similar with (3243 ± 599 ml.min-1) and without (3252 ± 384 ml.min-1) previous aerobic exercise (p > 0.05). However, the VO2final obtained at FS condition was higher with (3291 ± 218 ml.min-1) than without (3097 ± 207 ml.min-1) previous aerobic exercise (p < 0.05). The heart rate was higher at ES condition with than without previous aerobic exercise (p < 0.05). There was no significant difference in this variable for FS condition with and without previous aerobic exercise (p > 0.05). It can be concluded that the results the previous exercise (70%) achieved lasting 6 minutes followed by 6 minutes of recovery appears to influence / commit ting the conditions during the pacing for this population

Um Estudo da modelagem matemática na educação matemática e seu potencial para o desenvolvimento do pensamento crítico

The implementation of mathematical modeling curricula represents a great challenge, both for teachers and students, since it escapes the traditional teaching methodology, i.e. when the teacher speaks to his/her students. This work presents, at least, one possible way of implementing mathematical modeling inside the classroom, and how this way encourage critical thinking in students. I see mathematical modeling as an opportunity to minimize student's rejection and increase their interest for mathematics, promoting their competencies to give points of scene in every day situations. The history of mathematics shows that mathematical modeling had developed since almost the beginning of human live, when men needed to solve problems that arose in the course of his life. Mathematics has become more and more abstract, but it is important to recall what was originated it. In this way, it is possible to make this subject matter more meaningful to students. I will make an introduction of mathematical modeling, presenting some important definitions. Based on this framework, I will present a classroom instruction understand on a 7 th grade classroom by myself. With this in instruction I sustain the idea that mathematical modeling has, in fact, a great potential to improve the quality of mathematics teaching. I also sustain that, the development of critical thinking, as a competence, way be achieved with it

Estimativa das emissões de monóxido de carbono por veículos automotivos na cidade de Campinas/SP utilizando o modelo CAL3QHCR

Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island

Desenvolvimento de estrutura para purificação de água potável, através da irradiação de UV com lâmpadas fluorescentes especiais

Pós-graduação em Engenharia Elétrica - FEIS

Transformada de Fourier: teoria como base para aplicações em mecânica celeste

Pós-graduação em Matemática Universitária - IGCE

Estudo do comportamento em fadiga das ligas AA6005, AA6063 e AA6351

Aluminum alloys have shown great potential for the automotive industry, especially aluminum alloys 6xxx series. This category has good mechanical strength and excellent corrosion resistance, important for the areas of construction and transport. The automotive industry has always shown great interest in the study of fatigue behavior, because structural components are subjected to cyclic and vibration loads, generating cracks and fracturing. The mechanical response depends on the material properties, applications, surface condition and microstructure. In this work was study the fatigue behavior of high cycle of machined bodies (not polished) and the effect of roughness on the fatigue life for three aluminum alloys of 6xxx series: AA6005, AA6351 and AA606, all in the T6 condition . S / N curves were made from fatigue tests in rotating bending (R = -1). The influence of roughness was studied by measuring the roughness of each specimen. Was compare the fatigue behavior of polished specimen and not polished specimens. The fractured surfaces of samples were observed by MEV, and it was observed that most of nucleation sites for fatigue crack is initiated below the surface

Soluções numéricas de Equações Diferenciais Fracionária e Ordinária para o cálculo da distribuição da concentração em um sistema de compartimento

The purpose of this work was the study of numerical methods for differential equations of fractional order and ordinary. These methods were applied to the problem of calculating the distribution of the concentration of a given substance over time in a given physical system. The two compartment model was used for representation of this system. Comparison between numerical solutions obtained were performed and, in particular, also compared with the analytical solution of this problem. Finally, estimates for the error between the solutions were calculated

Monitoramento de cultivos submersos de linhagens de Streptomyces clavuligerus para a quantificação de distribuição de fluxos metabólicos

Pós-graduação em Biotecnologia - IQ

Modelo matemático para o controle ótimo de Volt/VAr em sistemas de distribuição de energia elétrica trifásicos

Pós-graduação em Engenharia Elétrica - FEIS

Propostas de modelagem matemática para o problema de restauração de sistemas de distribuição de energia elétrica radiais

Pós-graduação em Engenharia Elétrica - FEIS