Correção da sodicidade de dois solos irrigados em resposta à aplicação de gesso agrícola

The chemical and physical degradation of the soils by salinity and sodicity problems constitutes a serious obstacle in productive irrigated areas in arid and semi-add regions. In order to eval mate the effect of gypsum on electrical conductivity, pH, exchangeable sodium percentage, sodium, calcium and magnesium content in saturation extract and exchangeable sodium of two saline-sodic soils: one from irrigated Perimeter Engenheiro Arco Verde in the municipality of Condado and another from irrigated Perimeter of São Gonçalo, in the municipality of Sousa both in the Paraiba State Brazil, an experiment was carried out in green house of the Departamento de Solos e Engenharia Rural, Centro de Ciências Agrárias, Universidade Federal da Paraíba, Areia, Brazil, in a factorial design 2 × 5 referring the two soils and five gypsum levels equivalent to 0; 3.2; 6.3; 9.4 and 12.5 g kg-1 to each soil. The gypsum application exercised positive effects on reduction of salinity and sodicity. The values of electrical conductivity, exchangeable sodium percentage, pH and contents of soluble and exchangeable sodium in relation to data of the soils before application of treatments with gypsum in both the soils were found to decrease.

Efeitos de níveis de cobertura do solo sobre a produtividade e crescimento do feijoeiro irrigado, em sistema de plantio direto

The objective of this research was to study the effects of five different treatments of grass (Brachiaria decumbens) straw mulch on common beans (Phaseolus vulgaris L.): 0% (0 t.ha-1), 25% (2,25 t.ha-1), 50% (4,5 t.ha-1), 75% (6,75 t. ha-1) and 100% (9,0 t/ha) designed by randomized blocks, with four replicates. The irrigation was applied when minimum soil water potential were reached about - 30kPa. The water management based on tensiometers and soil water characteristic curve. A microsprinkler irrigation system was used. The experiment was set up at the Experimental Station of Embrapa Rice and Bean (Empresa Brasileira de Pesquisa Agropecuária Arroz e Feijão) at Santo Antonio de Goiás, Brazil, in a Dark - Red Latosol soil. The results showed: the bean yield and his components were not affected by treatments, except grain number/pod,. The mulch increased the water use efficiency and, consequently, decreased the number of irrigations when the mulch reached more than 50% straw mulch. The treatment with 100% of mulching presented the largest leaf area index and dry matter accumulation was not affected by mulching.

Avaliação do uso da terra em micro̧bacia utilizando uma matriz de partição fuzzy

Informatics evolution presently offers the possibility of new technique and methodology development for studies in all human knowledge areas. In addition, the present personal computer capacity of handling a large volume of data makes the creation and application of new analysis tools easy. This paper aimed the application of a fuzzy partition matrix to analyze data obtained from the Landsat 5 TMN sensor, in order to elaborate the supervised classification of land use in Arroio das Pombas microbasin in Botucatu, SP, Brazil. It was possible that one single training area present input in more than one covering class due to weight attribution at the signature creation moment. A change in the classification result was also observed when compared to maximum likelihood classification, mainly when related to bigger uniformity and better class edges classification.

Estudo do calo sensível e latente obtidos por intermédio da razão de Bowen em uma cultura de soja irrigada

The goal of this experiment was to study the latent and sensible heat variation determined by Bowen ratio from an irrigated soybean crop. A micrometeorological station with vertical displacement was constructed to maintain the same level of all measures over the canopy. The station was installed in the center of the crop, and it was over 130 m away from the main edge of the predominant wind direction. Fluxes were calculated by vertical temperature gradient determined at 0.15 and 1.15 m over the canopy. The latent heat flux was the mean energy consumer when the canopy covered the soil totally, and there were good soil water conditions. The sensible heat flux was greater when the soil was not totally covered by the canopy. The canopy was essential on the amount of latent heat dissipated by the crop.

Alterações de propriedades físicas de um nitossolo vermelho pela sucessão milheto-soja na fase de implantação do sistema de semeadura direta

The aim of this work was to evaluate the effect of a millet-soybean rotation, during the implantation phase of no-tillage system on the physical properties of a Nitossolo Vermelho distroférrico and the dry mass production of millet and the productivity of soybean. The experimental design used was a randomized blocks, in a split splot arrangement, with four replications. The parcels was constituted by three sowings (E1, E2 and E3) and the subparcels was constituted by harvests, where each harvest handling was: M1 - harvest each blooming and covering withdrawal; M2 - harvest each blooming and covering permanency; M3 - only in the first harvest on blooming and covering withdrawal; M4 - only in the first harvest on blooming and covering permanency, and M5-free growing, with no harvest. Samples were collected from three soil layers: 0-0,05, 0,05-0,10 and 0,10-0,20 m. The E2 showed smaller values of soil density and larger values of total porosity. The E3 resulted in smaller values of flocculation degree and mean weight diameter of the aggregates. The E3 showed smaller production of dry mass.

Análise distribuição da carga hidráulica e vazão na unidade operacional de um sistema de irrigação localizada

The different combination possibilities of emission uniformity and field slope within the operational unities of localized irrigation systems favor the occurence of some configurations in the irrigation system, and consequently different hydraulic head distributions, discharge and system management. After the system has been implanted, it is necessary to verify pressure and discharge distribution in the operational unit. This work objective was to verify pressure and discharge uniformity on derivation line and lateral lines with micro sprinkle in data gotten from operational research. The results allow to check that despite analyzed declivity; the higher the emission uniformity calculated for the line of derivation in the project is, the higher its pressure uniformity is. Previously the results of discharge in the emitters of the operational unit showed a constant variation entering the point of higher discharge and lower discharge, even though differently from the three tested irrigation blades.

Irrigação por gotejamento subsuperficial na produção e qualidade de cana-de-açúcar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparação entre trȩs métodos para estimar lâminas de irrigação

An experiment with four treatments was carried out on the experimental area of ADEI to compare three methods of water use requirement: ETc (T1) - irrigation based on crop evapotranspiration (ETc); Tensiometers (T2 and T3) - irrigations were made through reading of tensiometers installed at 40 cm deep and, Control (T4) - only one irrigation to promote the seedlings emergence. Both Class A pan and soil water depletion methods presented good results when the crop was developed without restraint of water. The Katerji method can be utilized in conditions of water restriction. Irrigation frequency was more important than amount of applied water for higher yield.

Influência da acurácia de instrumentos de medidas na comparação de métodos de estimativa da evapotranspiração de referência

The aim of this investigation was to evaluate four reference methods to estimate evapotranspiration (Makkink, Hargreaves, Class A pan and Radiation), compared tb Penman-Monteith method, that is considered standard by the Food and Agricultural Organization of the United Nations (FAO). Errors due to variable measurements in the reference evapotranspiration estimate were taken into consideration. The research was developed in an experimental area of the Department of Rural Engieering of the School of Agricultural and Veterinarian Sciences, Campus of Jaboticabal, São Paulo State University. An automated weather station was used and it was equipped with sensors to measure global and net radiation, temperature, relative humidity, and wind speed. The aftermath showed a better adjustment to Hargreaves. Makkink, Class A pan and Radiation methods are different from Penman-Monteith, therefore, they cannot be compared. To evaluate methods to estimate evapotranspiration and avoid possible evaluation errors, ETo estimate errors must be considered.

Modelagem numérica da superfície na geração da planialtimetra segundo dados de quatro equipamentos topogríficos

The aim of this present work was to compare planialtimetric charts obtained from different risings using two different theodolite types, a total station, and a precision level, used as control. Using a total station, an area was marked with clear variations of relief, following a grid, with a distance of 20 meters among stakes. After that, the stakes were read by the total station and two theodolites of different precisions. The geometric leveling was done by a precision level. The data were input in the DataGeosis software and the numerical modelling of the land was made with mesh of maximum rigidity, generating planialtimetric representation for each rising. It was verified, through comparison of the four representations that little variations occur in relation to the control. The closest representation of the control was the planialtimetry based on the data from the total station, in which the representations obtained from the theodolites were identical among themselves. It was concluded that in the process of obtaining detailed planialtimetry of small areas, submitted to the grid, it was not necessary to use composed geometric leveling, reducing work to the exclusive use of a total station or conventional theodolite.

Implantação do pilar ruju Botucatu na UNESP para integração ao Sistema Geodésico Brasileiro

The objective of this work was to implant a geodesic pillar in the campus of Botucatu (Rubião Júnior) of the São Paulo State University (UNESP), using active stations of the Brazilian Net of Continuous Monitoring (RBMC) as reference, aiming at inclusion in the Brazilian Geodesic System (BGS). In the planning of the trace, some aspects of the pillar optimization were considered: the field evaluation, the equipment Receiver GPS Topcon Hiper GGD and the net RBMC were used to trace the height, and the Topcon Tools 6.04 version software was use for the data processing, the ambiguity solution, as well as the treatment of injunctions during the column adjustment. The obtained results allowed the implantation of a more accurate pillar then 1ppm compatible to the RBMC net, meeting the specification of IBGE.

Propriedades físicas de um latossolo vermelho cultivado no sistema plantio direto

The pressure caused by agricultural machinery traffic many result in soil compactation in no-tillage system. The aim of this work was to evaluate no-tillage system onset,time on some physical properties, index S and organic matter (OM) of an oxysol located in Jaboticabal, Sao Paulo State, Brazil. The experiment had completely randomized split-splot design. The treatments consisted of four no-tillage systems: no-tillage for 2 years, no-tillage for 4 years, no-tillage for 6 years and one natural wooded area. The evaluated layers were: Q-0.10m, 0.10-0.20m and 0.20-030m. The following were determined: soil porosity, soil aggregates, bulk density, index S and organic matter. The results were submitted to variance analysis and when there was a difference between averages, Tukey's test was used to compare them. The natural wooded area showed higher organic matter, macroporosity, hydraulic conductivity and Index S. There was no difference between the studied parameters, showing that the no-tillage system for six years was not enough to change the soil physical property.

Geoprocessamento aplicado na distribuição espacial da capacidade de uso de uma microbacia

The present study aimed to show the spatial distribution of the Rochas watershed (Avaré-SP, Brazil) soil use capacity using the Idrisi geographical information system in order to contribute to a better territorial organization and the planning of the appropriate soil occupation. The obtained results using this methodology showed that most of the Rocha watershed areas are from the following groups: dystrophic yellow-red latosol (36.64%), eutroferric and distroferric red latosol (30.30%) with sandy texture. There was a predominance of areas with slope classes of 0-12%, plain to wavy relief (61.37% of the watershed area) showing that these areas are appropriate for annual culture plantations with wide use of machinery. Most of these areas were classified as class IV (73.79%) as to use capacity. In the studied area the following subclasses of land use capacity were found: IIe, s; IIIe; IVe; IVs; IVe,s; VIe and VIIe. Capacity subclasses IVe; IVe,s; IVs and Vie were the most significant because they are areas that can be used for agriculture but subject to severe soil impoverishment if there are no special care mainly for annual cultures. The Idrisi geographical information system was efficient to determine soil use capacity of the Rocha's watershed showing that the use of geoprocessing tools makes data analysis easier and faster, allowing digital data storage for future analysis uses mainly for territorial planning and environmental studies.

Influência de solos de diferentes texturas no desenvolvimento de plantas de Eucalyptus urograndis submetidas a déficit hídrico

The studies were developed with plants of Eucalyptus urograndis under greenhouse conditions, at Paulista State University (UNESP), Botucatu - SP, from March to July, 2005. The objective was to evaluate hydric stress influence on morphological and physiological characteristics of plants in clayay (1) and medium (2) soil texture. Two water treatment were used: -0.03 and -1.5 MPa minimum soil water potentials (□w). Plants from soil 2 and - 1.5MPa showed 43% reduction on leaf área, 34% on base stem diameter, 54% on aerial vegetal dry matter and plants from soil 1 presented 42.3% reduction on leaf área, 39,5% base stem diameter and 42% dry matter root reduction in relation to -0.03 MPa. The lowest leaf water potential (□f) value was-17.166 MPa on □w = -1.5 MPa and soil 2 and the greatest one on soil 1 and □w = -0.03 MPa., -6.766 MPa. The treatment -0.03MPa showed about 11,3% higher transpiration values than those plants from -1.5MPa. The higher Rs value (2.149 s.cm-1) occurred on plants under -1.5MPa and soil 2. There was significant correlation between Tf and Rs, and the treatmens from medium soil were more sensitive, reaching until 32°C.

Compactação do solo e intervalo hídrico ótimo no crescimento da parte aérea e produtividade da cultura do milho

The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.