Análise da variação da vazão e da concentração do metano presentes nos gases gerados no aterro sanitário de Rio Claro - SP

The study of the generation of landfill gas contributes to the understanding of the relationship between gas production and other parameters, such as time of disposal of waste and moisture (rainfall) and, thus, can subsidize the viability study for energy. This study aims to evaluate the interference of the time of disposal of waste and moisture (rainfall) in the production and composition of biogas generated at the landfill in Rio Claro - SP. As a result it was observed that for the landfill studied, the average percentage of methane in biogas ranged from 49.9% to 54.7%. It was found that moisture (rainfall) and the time of waste disposal are parameters which do not cause significant changes in methane concentration in biogas. However, when analyzed the flow of biogas, which had the maximum average value of 152.86m3/h and minimum average value of 15.47m3/h was observed great interference of moisture (rainfall) and the time of disposal of waste, because well of gas located in newer areas of the landfill showed higher values of flow rate than the areas where the landfill was the beginning of the arrangement. The same way, it was observed that in the dry season flow of biogas decreased in all drains gas analyzed

Avaliação dos gases de efeito estufa a partir do carvão

This paper addresses the context of emissions of Greenhouse Gases (GHG) from activities related to Coal, called fugitive emissions. The survey of factors, development, analysis, and suggestions for controlling emissions are conducted in order to reduce risks to the environment and people around it. The greenhouse gases absorb radiation, emitted by the Earth’s surface, and hinder their escape into space. This process is essential to terrestrial life. Increasing the concentration of those gases in the atmosphere has led to an increase in the terrestrial temperature. A selection of processes that emit gases and the study and development of calculations for measuring fugitive emissions applied in different sources from coal are performed. The greenhouse gases can be released from the extraction, processing, storage, and transportation of fossil fuels to the end consumer. Coal has 4 main fugitive factors: mining, post-mining, oxidation at low temperature, and uncontrolled combustion. The coal formation process produces methane (CH4) and carbon dioxide (CO2), being the methane, the main greenhouse gas from the coal mining and handling. The types of activities and the weight of each in the issuing process are observed. It is also made comparisons between the countries with the highest emissions rates. Are evaluated what has been done and what is needed to decrease emissions, for example the use of gas as an alternative fuel for energy generation

Análise e simulação de modelos matemáticos para a estimativa da geração de gases em bioprocessos de decomposição anaeróbia de resíduos sólidos em aterros sanitários

Brazil faces a complex problem in respect to municipal solid waste, having been in recent years an increase of its generation without the country there be adequate for proper disposal thereof. In many states , the percentage of waste destined improperly , ie , in dumps , landfills, send- outs , among others , is greater than that disposed in landfills , which would be the most correct way to be made. It can be argued that this discrepancy is due to the high cost of implementation and operation of the landfill, and the same need large areas with physical characteristics that suit their operations . When there is a provision in properly constructed landfills , municipal solid waste grounded generate gases with high potential energy through biochemical reactions during the anaerobic decomposition of organic material stored . Such gases can be used for power generation within the landfill or other economic means . To estimate the gas generation will be sufficient for such economic compensation , there are mathematical models that make estimating the amount of gas produced . These models calculate the energy capacity and generation , using parameters obtained based on the characteristics of solid waste , climate of the region where they are grounded and grounding time . Such models have been raised and studied so that it was possible to perform simulations that demonstrate the behavior of biogas generation related to the external conditions of the landfill that interfere with biological reactions within. The results show differences between the values obtained , it shows that the preparation of the models found and used in the simulations were allocated amounts for different parameters that determine this difference in the estimate . Therefore, to rule, the models have difficulty understanding this because there is no clarity in the formulation of the equations , and the definition of variables and parameters would require a detailed study to...

Implementação de um tuboexpansor na refinaria do Planalto Paulista – REPLAN com objetivo do aproveitamento da energia contida nos gases residuais do FCC – Fluid Catalytic Cracking na geração de energia elétrica

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Análise das emissões de gases do efeito estufa na produção do milho através da fertilização por resíduos de biocombustível. Estudo de caso : Dedelow - Brandemburgo - Alemanha

The focus of this research study were gas exchange between soil and atmosphere of nitrous oxide (N2O) between different fertilization treatments Corn The research, conducted in the experimental field Dedelow - Brandenburg / Germany, analyzed three different fertilization treatments, aiming to quantify GHE emissions, to identify the influence of the residue of biogas in the release of these gases process in agricultural soils in search for a solution fertilization less harmful to the environment and the greenhouse effect , based on the comparison of three treatments: organic fertilization, mineral fertilization and no fertilization. It was found through the analysis of the measurements that the first was the one which issued N2O, showing that even though coming from the residue of biogas , when returned to the soil, it becomes harmful to the environment and global warming . The cultivation of energy crops can lower or raise the emissions of greenhouse gases, so it is necessary for further research on this question not only in Germany , where such research is in continuity, but also in Brazil, a pioneer in the introduction to his energy matrix of a biofuel produced from cane sugar

Dispositivo de microdescargas em gases na pressão atmosférica

Neste trabalho foi desenvolvido um dispositivo de microdescargas em gases à pressão atmosférica para geração de plasma a fim de ser utilizado no tratamento de superfícies. O trabalho foi baseado em um estudo de iniciação científica que aconteceu em duas etapas. Na introdução apresentam-se as motivações do estudo, o dispositivo desenvolvido na primeira etapa do trabalho bem como os primeiros resultados e propostas de melhorias. Definem-se os objetivos da segunda etapa, que contemplam modificações no dispositivo de descarga e na fonte de alimentação. Em seguida são explanados os métodos utilizados para confecção do dispositivo, construção da fonte de alimentação e circuito de fotodetecção para observar as descargas. Apresenta-se o modelo e configurações dos experimentos, os resultados obtidos são expostos e debatidos brevemente. Colocam-se as conclusões do trabalho e novas propostas de investigação e melhoramentos para o estudo das microdescargas. Seguem-se os agradecimentos aos envolvidos no projeto e, por fim, a bibliografia utilizada

Caracterização de estruturas de óxido de estanho modificado como sensores de gases

Pós-graduação em Química - IQ

Uso da avaliação do ciclo de vida para a determinação na redução de emissões de gases do efeito estufa e do consumo de energia associados a reciclagem de EPS

Pós-graduação em Engenharia Mecânica - FEG

Assessing the influence of mechanical ventilation on blood gases and blood pressure in rattlesnakes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The application of neural networks to the analysis of dissolved gases in insulating oil used in transformers

The state of insulating oils used in transformers is determined through the accomplishment of physical-chemical tests, which determine the state of the oil, as well as the chromatography test, which determines possible faults in the equipment. This article concentrate on determining, from a new methodology, a relationship among the variation of the indices obtained from the physical-chemical tests with those indices supplied by the chromatography tests.The determination of the relationship among the tests is accomplished through the application of neural networks. From the data obtained by physical-chemical tests, the network is capable to determine the relationship among the concentration of the main gases present in a certain sample, which were detected by the chromatography tests.More specifically, the proposed approach uses neural networks of perceptron type constituted of multiple layers. After the process of network training, it is possible to determine the existent relationship between the physical-chemical tests and the amount of gases present in the insulating oil.

Does occupational exposure to anesthetic gases lead to increase of pro-inflammatory cytokines?

There is great concern about the possible harmful effects of exposure to volatile anesthetics. The current study aimed at evaluating, for the first time, the effects of occupational exposure to anesthetic gases on physicians who work in operating rooms, by determining several inflammatory cytokines. Plasma inflammatory cytokines (IL-1β, -6, -8, -10, -12, TNF-α) were investigated in 30 individuals who were allocated into two groups of 15: the exposed group, consisting of operating room medical personnel exposed to a mixture of anesthetic gases for 3 years, and a control group composed of medical personnel not exposed to anesthetic gases. The concentrations of volatile anesthetics were measured in the operating room by means of an infrared portable analyzer Our findings suggest an increase of the pro-inflammatory IL-8 (p < 0.05) in medical personnel exposed to high concentrations of anesthetic gases, even for a relatively short period.

Fluxo de gases de efeito estufa na implantação de sistema silvipastoril em pastejo com ovinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eficiência de um filtro de mangas no tratamento de gases oriundos de caldeira de queima de biomassa sólida

Atualmente a implantação de qualquer planta industrial que possa gerar impacto ambiental, ou até mesmo adequação de equipamentos já instalados para a não geração de poluentes ou geração dentro de limites adequados, passa cada vez mais por fiscalização rigorosa dos órgãos ambientais. A ventilação industrial tem sido e continua sendo a principal medida de controle efetiva para ambientes de trabalho que contenham dispersão de efluentes gasosos e material particulado de natureza prejudiciais, e baseado neste fato de relevância inegável é que se fundamenta este estudo. Um sistema de tratamento de gases com enfoque em ventilação local exaustora engloba vários equipamentos, e dentre eles o filtro de mangas é considerado um dos principais, pois sua função é a de efetuar a filtração dos gases proporcionando emissões dentro das tolerâncias dos órgãos ambientais, refletindo desta forma o objeto principal deste estudo de caso, a eficiência do equipamento. Especificamente neste estudo apresentam-se dados de eficiência do filtro de mangas em questão, componente de um sistema de desempoeiramento de uma caldeira de queima de resíduos sólidos. Foram utilizados dados coletados em campo em dois pontos do circuito do sistema, entrada do filtro de mangas e descarga de gases limpos, além de análise do elemento filtrante. As coletas e análises foram realizadas de acordo com as normas para a correta aferição dos dados gerados. Os resultados permitiram observar patamares de eficiência de filtração para os resíduos gerados na queima, demonstrando os cuidados a serem tomados no dimensionamento do equipamento para esta aplicação.

Fertilizantes e sistemas de irrigação: emissões de gases de efeito estufa no cultivo do milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e emissão de gases de efeito estufa de bovinos alimentados com teores de concentrado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)