Testes multiambientais na seleção de genótipos de arroz utilizando o modelo de regressão nos sítios ou locais

A análise da interação genótipo x ambiente utilizda no melhoramento de plantas tem sofrido mudanças na última década, melhorando a sua eficiência quanto à seleção dos genótipos sob diferentes condições ambientais. O objetivo deste trabalho foi analisar a produtividade e estabilidade de 12 genótipos de arroz em oito ambientes, durante os anos 2005 e 2006, na Colômbia. O delineamento utilizado foi o de blocos ao acaso com quatro repetições. Os parâmetros de estabilidade fenotípica e o agrupamento dos ambientes foram estimados pelo estudo da interação genótipo x ambiente, segundo o método SREG (Regressão nos sítios ou locais) e seu gráfico biplot (GGE). As análises estatísticas indicaram diferenças significativas (com 5% de probabilidade de erro) entre genótipos e entre ambientes e significância (com 5% de probabilidade de erro) da interação genótipo x ambiente, sugerindo uma resposta diferente dos genótipos nos vários ambientes. No método SREG, os dois primeiros componentes principais da interação explicaram 75,29% da interação. Os genótipos 400094, 350361 e a variedade Fedearroz 50 foram considerados os de maior produtividade. Segundo o gráfico biplot GGE, os ambientes La Libertad e Escobal foram os mais favoráveis para o cultivo do arroz.

Características morfogênicas do capim-piatã submetido à adubação com efluentes de abatedouro avícola

O objetivo do trabalho foi avaliar diferentes doses de efluente de abatedouro avícola para proporcionar melhorias nas características produtivas, morfogênicas e estruturais do capim-piatã. O experimento foi conduzido em casa de vegetação, adotando-se delineamento inteiramente casualizado, em que foram testadas cinco doses de efluentes: 324, 648, 972, 1.296 e 1620m³ ha-1 ou equivalente a 50, 100, 150, 200 e 250kg ha-1 de N. As variáveis mensuradas foram: produção de matéria seca (MS), taxa de aparecimento de folha (TApF), taxa de alongamento de folha (TAlF), filocrono, taxa de alongamento de pseudocolmo (TAlC), comprimento final de folha (CFF) e números de folhas verdes (NFV). A produção de MS seguiu um modelo linear de predição em função das doses efluente avícola, em que o tratamento com 250kg ha-1 de N foi 55% maior, quando comparado com o tratamento de 50kg ha-1 de N. Todas as características morfogênicas e estruturais avaliadas com exceção do filocrono apresentaram comportamento linear positivo. Dessa forma, o efluente de abatedouro avícola pode ser utilizado como uma alternativa para adubação do capim-piatã, pois este respondeu de maneira crescente até a dose máxima testada.

Narrativas orais de crianças com desenvolvimento típico de linguagem

TEMA: desenvolvimento da narrativa oral. OBJETIVO: verificar o tempo de narrativa e de pausa, o número de palavras e de intervenções do interlocutor em narrativas orais de crianças com desenvolvimento típico. MÉTODO: participaram do estudo 31 crianças divididas em quatro grupos etários: GI (3:1 a 4:0 anos), GII (4:1 a 5:0 anos), GIII (5:1 a 6:0 anos) e GIV (6:1 a 7:0 anos). Amostras de narrativa espontânea e narrativa com livro sem palavras foram coletadas em vídeo, transcritas e analisadas estatisticamente por meio de teste exato de Fisher (não-paramétrico) e modelo de regressão linear com efeitos mistos. RESULTADOS: os valores de tempo de pausa, tempo de narrativa, e o número de palavras no contexto de livro foram significativamente maiores em relação à narrativa espontânea (p-valor < 0,01). Quanto ao número de intervenções, houve correlação (p-valor = 0,03) entre idade e intervenção no contexto de livro com diminuição da intervenção na media que aumentou a idade. CONCLUSÃO: as crianças apresentaram uma narrativa mais extensa no contexto de relato com livro sem palavras em relação ao contexto de narrativa espontânea, porém, sem diferenças significativas entre as idades. O estudo permitiu ainda concluir que a participação do interlocutor faz-se menos necessária conforme aumenta a idade do narrador.

Variabilidade genética do peso adulto de matrizes em um rebanho Nelore do Estado de São Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comportamento da Curva de Lactação de Cabras Mestiças Saanen em Função da Suplementação de Concentrado e do Sistema de Produção

Estudaram-se o comportamento da curva de lactação em 31 cabras mestiças Saanen e o efeito de duas estratégias de suplementação de concentrado: 30% das exigências em energia líquida da 3ª semana até o final da lactação (ESC.1); 60% das exigências em energia líquida diária da 3ª à 13ª semana, e 15% da 14ª semana até o final da lactação (ESC.2), em sistemas de produção semi-confinamento e pastagem. Os seguintes modelos foram avaliados: Wood linear e não-linear, Morant linear e não-linear, D-set e Grossman. O modelo Wood não linear foi o que melhor descreveu o comportamento da curva de lactação. A resposta da estratégia de suplementação com concentrado variou em função do sistema de produção. A estratégia de suplementação com concentrado afetou mais intensamente o comportamento da curva de lactação no sistema de produção semi-confinamento. A estratégia ESC.2, de suplementação com concentrado, resultou em mais dias para atingir o pico de produção, no sistema semi-confinamento, e maior produção no pico em ambos sistemas.

Optimum design of microirrigation systems in sloping lands

When an area to be irrigated has a high slope gradient in the manifold line direction, an option is to use a tapered pipeline to economize on pipe costs and to keep pressure head variations within desired limits. The objective of this paper is to develop a linear optimization model to design a microirrigation system with tapered, downhill manifold lines, minimizing the equivalent annual cost of the hydraulic network and the annual pumping cost, and maximizing the emission uniformity previously established to the subunit. The input data are irrigation system layout, cost of all hydraulic network components, and electricity price. The output data are equivalent annual cost, pipeline diameter in each line of the system, pressure head in each node, and total operating pressure head. To illustrate its capability, the model is applied in a citrus orchard in Sao, Paulo State, Brazil, considering slopes of 3, 6, and 9%. The model proved to be efficient in the design of the irrigation system in terms of the emission uniformity desired.

Genetic Algorithms (Binary and Real Codes) for the Optimisation of a Fermentation Process for Butanol Production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of biofertilizer rates on the structural, morphogenetic and productive characteristics of Piata grass

The objective of this study was to investigate the influence of different levels of biofertilizers from cattle and swine manure on the structural, morphogenetic and productive characteristics of Brachiaria brizantha cv. Piata. The experiment was arranged in a completely randomized factorial design with split plots. The plots were defined by eight treatments: two biofertilizers (cattle and swine), four levels (0, 100, 200 and 300 kg N.ha(-1)) and subplots by four different cutting periods. The cutting for plant uniformity was performed at 45 days after sowing at 15 cm above the soil surface. The biofertilizeres were applied in a single level, after the cutting of plants, in rates of 0, 0.23 and 0.19, 0.45 and 0.38, 0.68 and 0.57 liters pot(-1) for the biofertilizers from cattle and swine manure, respectively. These rates were also equivalent to levels of 0, 100, 200 and 300 kg N.ha(-1). There was no significant difference between the types of biofertilizers as there was no interaction between them and the different levels, hence both biofertilizers could be applied without any loss of nutrient intake by the plants used in this experiment. There was a significant difference between the production of green and dry matter, the leaf appearance rate, phyllochron, leaf and pseudostem elongation rates, number of green leaves, final leaf length, number and weight of tillers, according to the increase of nitrogen rates, following linear prediction model. Effect of the cutting periods was also observed, once the plants harvested during the summer presented greater performance of structural and morphogenetic characteristics.

Additive genetic relationships between scrotal circumference, heifer pregnancy, and stayability in Nellore cattle

Scrotal circumference data from 47,605 Nellore young bulls, measured at around 18 mo of age (SC18), were analyzed simultaneously with 27,924 heifer pregnancy (HP) and 80,831 stayability (STAY) records to estimate their additive genetic relationships. Additionally, the possibility that economically relevant traits measured directly in females could replace SC18 as a selection criterion was verified. Heifer pregnancy was defined as the observation that a heifer conceived and remained pregnant, which was assessed by rectal palpation at 60 d. Females were exposed to sires for the first time at about 14 mo of age (between 11 and 16 mo). Stayability was defined as whether or not a cow calved every year up to 5 yr of age, when the opportunity to breed was provided. A Bayesian linear-threshold-threshold analysis via Gibbs sampler was used to estimate the variance and covariance components of the multitrait model. Heritability estimates were 0.42 +/- 0.01, 0.53 +/- 0.03, and 0.10 +/- 0.01, for SC18, HP, and STAY, respectively. The genetic correlation estimates were 0.29 +/- 0.05, 0.19 +/- 0.05, and 0.64 +/- 0.07 between SC18 and HP, SC18 and STAY, and HP and STAY, respectively. The residual correlation estimate between HP and STAY was -0.08 +/- 0.03. The heritability values indicate the existence of considerable genetic variance for SC18 and HP traits. However, genetic correlations between SC18 and the female reproductive traits analyzed in the present study can only be considered moderate. The small residual correlation between HP and STAY suggests that environmental effects common to both traits are not major. The large heritability estimate for HP and the high genetic correlation between HP and STAY obtained in the present study confirm that EPD for HP can be used to select bulls for the production of precocious, fertile, and long-lived daughters. Moreover, SC18 could be incorporated in multitrait analysis to improve the prediction accuracy for HP genetic merit of young bulls.

Optimisation of a fermentation process for butanol production by particle swarm optimisation (PSO)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimized Allocation of Control and Protective Devices in Electric Distribution Systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Super-Poincaré covariant quantization of the superstring

Using pure spinors, the superstring is covariantly quantized. For the first time, massless vertex operators are constructed and scattering amplitudes are computed in a manifestly ten-dimensional super-Poincaré covariant manner. Quantizable non-linear sigma model actions are constructed for the superstring in curved backgrounds, including the AdS 5 × S 5 background with Ramond-Ramond flux.

Microbiological assay for the determination of azithromycin in ophthalmic solutions

The validation of a simple, sensitive and specific agar diffusion bioassay, applying cylinder-plate method, for the determination of the antibiotic azithromycin in ophthalmic solutions is described. Using a strain of Bacillus subtilis ATCC 9372 as the test organism, azithromycin at concentrations ranging from 50.0 to 200.0 μg·mL-1 could be measured in 1.666 7 mg·mL-1 ophthalmic solutions. A prospective validation of the method showed that the method was linear (r = 0.999 9) and precise (RSD = 0.70) and accurate (it measured the added quantities). The results obtained by bioassay method could be statistically calculated by linear parallel model and by means of regression analysis and verified using analysis of variance (ANOVA). We conclude that the microbiological assay is satisfactory for quantification of azithromycin in ophthalmic solutions.

Estimation of variance components and prediction of breeding values in rubber tree breeding using the REML/BLUP procedure

The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.

Remarks on orthotropic elastic models applied to wood

Wood is generally considered an anisotropic material. In terms of engineering elastic models, wood is usually treated as an orthotropic material. This paper presents an analysis of two principal anisotropic elastic models that are usually applied to wood. The first one, the linear orthotropic model, where the material axes L (Longitudinal), R(radial) and T(tangential) are coincident with the Cartesian axes (x, y, z), is more accepted as wood elastic model. The other one, the cylindrical orthotropic model is more adequate of the growth caracteristics of wood but more mathematically complex to be adopted in practical terms. Specifically due to its importance in wood elastic parameters, this paper deals with the fiber orientation influence in these models through adequate transformation of coordinates. As a final result, some examples of the linear model, which show the variation of elastic moduli, i.e., Young's modulus and shear modulus, with fiber orientation are presented.