Variation in liana abundance and biomass along an elevational gradient in the tropical Atlantic Forest (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Influence of Cutting Speed and Cutting Initiation Location in Specimen Preparation for the Microtensile Bond Strength Test

Purpose: This study evaluated the effect of cutting initiation location and cutting speed on the bond strength between resin cement and feldspathic ceramic.Materials and Methods: Thirty-six blocks (6.4 x 6.4 x 4.8 mm) of ceramic (Vita VM7) were produced. The ceramic surfaces were etched with 10% hydrofluoric acid gel for 60 s and then silanized. Each ceramic block was placed in a silicon mold with the treated surface exposed. A resin cement (Variolink II) was injected into the mold over the treated surface and polymerized. The resin cement-ceramic blocks were divided into two groups according to experimental conditions: a) cutting initiation location - resin cement, ceramic and interface; and b) cutting speed - 10,000, 15,000, and 20,000 rpm. The blocks were sectioned to achieve non-trimmed bar specimens. The microtensile test was performed in a universal testing machine (1 mm/min). The failure modes were examined using an optical light microscope and SEM. Bond strength results were analyzed using one-way ANOVA and Tukey's test (alpha = 0.05).Results: Significant influences of cutting speed and initiation location on bond strength (p < 0.05) were observed. The highest mean was achieved for specimens cut at 15,000 rpm at the interface (15.12 +/- 5.36 MPa). The lowest means were obtained for specimens cut at the highest cutting speed in resin cement (8.50 +/- 3.27 MPa), and cut at the lowest cutting speed in ceramic (8.60 +/- 2.65MPa). All groups showed mainly mixed failure (75% to 100%).Conclusion: The cutting speed and initiation location are important factors that should be considered during specimen preparation for microtensile bond strength testing, as both may influence the bond strength results.

Petroleum well drilling monitoring through cutting image analysis and artificial intelligence techniques

Petroleum well drilling monitoring has become an important tool for detecting and preventing problems during the well drilling process. In this paper, we propose to assist the drilling process by analyzing the cutting images at the vibrating shake shaker, in which different concentrations of cuttings can indicate possible problems, such as the collapse of the well borehole walls. In such a way, we present here an innovative computer vision system composed by a real time cutting volume estimator addressed by support vector regression. As far we know, we are the first to propose the petroleum well drilling monitoring by cutting image analysis. We also applied a collection of supervised classifiers for cutting volume classification. (C) 2010 Elsevier Ltd. All rights reserved.

Attractiveness of copperleaf-based bait to leaf-cutting ants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Si3N4 ceramic cutting tool sintered with CeO2 and Al2O3 additives with AlCrN coating

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

RAPD analysis of the sexual state and sterile mycelium of the fungus cultivated by the leaf-cutting ant Acromyrmex hispidus fallax

That the symbiotic fungus of leaf-cutting ants only occasionally produces the sexual phase makes their identification confusing. This has occurred so rarely, either in laboratory nests, or in unbalanced field nests. that the possibility of contamination of the fungal garden by other fungi cannot be disregarded. In this paper we describe the formation of several basidiomata in a healthy and free-living nest of the leaf-cutting ant Acromyrmex hispidus fallax. The cultivation in vitro of the sterile mycelia (isolated from the fungal garden) with their typical inflated tips, and the similarity of both forms confirmed by RAPD analysis of their genomic DNA. The fungus was identified as Leucoagaricus gongylophorus.

Age polyethism in the leaf-cutting ant Acromyrmex subterraneus brunneus Forel, 1911 (Hym., Formicidae)

This study describes and quantifies the behavioural acts of two laboratory colonies of Acromyrmex subterraneus brunneus by investigating worker age polyethism. Twenty-nine behavioural acts were recorded during the 19-week observation period. Young individuals performed tasks inside the nest related to brood care and care for the fungus garden, whereas older individuals performed activities outside the nest such as foraging and activities in the waste chamber. The average longevity (+/- SD) was 108.21 +/- 3.30, 109.15 +/- 1.92 and 122.71 +/- 1.55 days for large, medium and small workers, respectively. The small-sized workers presented a higher probability of reaching older age than large- and medium-sized workers. This study describes task switching according to age polyethism and the relationship of physical and temporal subcastes.

Bond strength of resin modified glass ionomer cement to primary dentin after cutting with different bur types and dentin conditioning

The aim of this in vitro study was to evaluate the effect of different bur types and acid etching protocols on the shear bond strength (SBS) of a resin modified glass ionomer cement (RM-GIC) to primary dentin. Forty-eight clinically sound human primary molars were selected and randomly assigned to four groups (n=12). In G1, the lingual surface of the teeth was cut with a carbide bur until a 2.0-mm-diameter dentin area was exposed, followed by the application of RM-GIC (Vitremer - 3M/ESPE) prepared according to the manufacturer's instructions. The specimens of G2, received the same treatment of G1, however the dentin was conditioned with phosphoric acid. In groups G3 and G4 the same procedures of G1 and G2 were conducted respectively, nevertheless dentin cutting was made with a diamond bur. The specimens were stored in distilled water at 37 degrees C for 24h, and then tested in a universal testing machine. SBS. data were submitted to 2-way ANOVA (= 5%) and indicated that SBS values of RM-GIC bonded to primary dentin cut with different burs were not statistically different, but the specimens that were conditioned with phosphoric acid presented SBS values significantly higher that those without conditioning. To observe micromorphologic characteristics of the effects of dentin surface cut by diamond or carbide rotary instruments and conditioners treatment, some specimens were examined by scanning electron microscopy. Smear layer was present in all specimens regardless of the type of rotary instrument used for dentin cutting, and specimens etched with phosphoric acid presented more effective removal of smear layer. It was concluded that SBS of a RM-GIC to primary dentin was affected by the acid conditioning but the bur type had no influence.

THE POPULATION STATUS OF THE ENDANGERED BRAZILIAN ENDEMIC LEAF-CUTTING ANT ATTA-ROBUSTA (HYMENOPTERA, FORMICIDAE)

The population status of the endemic leaf-cutting ant Atta robusta was assessed using extensive field surveys. In the coastal plain of the state of Rio de Janeiro, we found localized populations of A. robusta, bur no evidence of population recruitment. In disturbed habitats, A. robusta is apparently being displaced by Atta sexdens rubropilosa.

Toxicity of lignans to symbiotic fungus of leaf-cutting ants

Lignans from Virola sebifera Aubl., Virola sp., and Otoba parvifolia (Mkfg.) A. Gentry (Myristicaceae) inhibited the in vitro growth of the fungus cultivated by leaf-cutting ants of the species Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae). A comparison of activity among the lignans was obtained.

Yeasts associated with nests of the leaf-cutting ant Atta sexdens rubropilosa Forel, 1908

A total of 137 yeasts associated with the leaf-cutting ant Atta sexdens rubropilosa Forel, 1908 were characterized, being selected 93 for analysis. Twenty four species belonging to seven genera(Candida, Cryptococcus, Rhodotorula, Sporobolomyces, Tremella, Trichosporon, Pichia) were isolated from the different analysed material. The genus Candida was widely distributed, with C. homilentoma, C. colliculosa-like, C. famata and C. colliculosa being the most prevalent. A few isolates did not fit the standard descriptions and probably some of them could be new biotypes or even new species. Three strains of black yeasts were also isolated, and four others were identified as being Candida spp. The effective number of yeast species was higher in newer sponge. The origin, distribution and relative importance of these microorganisms for the ants are discussed.

Refuse production in leaf-cutting ants (Hymenoptera: Formicidae) and its relationship with leaf harvest

We examined the relationship between fungal refuse production and vegetation input in a laboratory colony of the leaf-cutting ant Acromyrmex coronatus. We found only a strong 6-day time-delay in the production of refuse with variation in substrate intake.

GROWTH OF OOCYTE AND NURSE CHAMBER DURING OOGENESIS IN QUEENS OF THE LEAF-CUTTING ANT ATTA SEXDENS RUBROPILOSA FOREL, 1908 (HYM, FORMICIDAE)

Volume changes of the vitellarium components of the leaf-cutting ant Atta sexdens rubropilosa are reported. The oocyte grew to approximately 409 times of its initial volume and reached a maximum value of 1.2 x 10(7) mu m(3). The follicle increase in size at a more or less constant rate up to the 12(th), showing an elevated growth rate thereafter. The mean number of follicles per ovariole was 16.42 +/- 3.58.

Sex allocation in the polydomous leaf-cutting ant Acromyrmex balzani

Logistic regression analysis was used to analyse sex allocation in a population of the leaf-cutting ant Acromyrmex balzani occurring in a pasture in southern Brazil. The field sample consisted of 151 fungus-garden chambers (18 queenright and 133 queenless), belonging to 50 nests with three vertically stacked chambers per nest on average. Taking nest chamber as the unit of analysis, seven predictor variables were considered: sampling date, chamber depth, chamber volume, weight of fungus garden, presence of a queen, number of large workers, and number of small to medium workers. The population-level numerical proportion of females was 0.548 and the inferred proportional energetic investment in females 0.672. The former was not significantly different from 0.5 (P=0.168), but the latter was (P=0.0003). The proportional investment in females per fungus garden increased with the number of large workers present (P=0.0002) and decreased with the dry weight of the fungus garden (P=0.012). This implies that resource acquisition through foraging is likely to be a major proximate determinant of sex allocation. The negative correlation between female bias and fungus garden weight might be due to developing adult females requiring more food than males, but this hypothesis could not be confirmed by direct statistical evidence.