A pH optode based on thymol blue: application to determination of CO2 using flow injection analysis system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Número necessário de experimentos para a comparação de cultivares de feijão

O objetivo deste trabalho foi determinar o número de medições (experimentos) necessários à predição do desempenho de cultivares de feijão (Phaseolus vulgaris L.). Quatorze cultivares de feijão foram avaliadas em nove experimentos conduzidos em Santa Maria, Estado do Rio Grande do Sul (latitude 29°42'S, longitude 53°49'W e 95m de altitude), nos anos agrícolas de 2000/2001 a 2004/2005. As avaliações foram constituídas por produtividade de grãos, número de vagens por planta, número de sementes por vagem, massa de cem grãos, população final de plantas, número de dias da emergência ao florescimento, número de dias da emergência à colheita, altura de inserção da primeira vagem, altura de inserção da última vagem, grau de acamamento e coloração do tegumento dos grãos. As estimativas dos coeficientes de repetibilidade foram obtidas por três métodos - análise de variância, componentes principais e análise estrutural. Sete experimentos possibilitam a identificação de cultivares superiores de feijão em relação às características de produção, de fenologia e de morfologia, com 85% de exatidão no prognóstico de seu valor real.

Persistência do plano experimental em ensaios de avaliação de germoplasma elite de feijão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de fatores genéticos e ambientais que afetam a infestação de fêmeas bovinas da raça Caracu por carrapatos (Boophilus microplus)

Este trabalho foi conduzido com o objetivo de avaliar o efeito de fatores de meio sobre a infestação de bovinos Caracu pelo carrapato Boophilus microplus (Canestrini, 1887) e estimar parâmetros genéticos do grau de infestação por esse ectoparasita. Foram realizadas contagens em fêmeas de dois rebanhos, nas quatro estações, por dois anos consecutivos (setembro/1998 a julho/2000). Contou-se o número de carrapatos (NC) em um dos lados do animal e atribuiu-se escore visual (EC) de acordo com a quantidade de carrapatos no animal. Foram feitas de uma a oito avaliações, totalizando-se 4.079 e 3.994 observações de NC e EC, respectivamente, em 718 animais. Os dados foram analisados pelo método dos quadrados mínimos com um modelo que incluiu efeitos de rebanho (R), cor do animal (C), R x C, animal dentro de R x C como erro a, ano e estação da avaliação, espessura de pelame e idade do animal como covariável. As estimativas dos componentes de variância foram obtidas pelo método da máxima verossimilhança restrita livre de derivadas, utilizando-se um modelo que incluiu os efeitos fixos de grupo de contemporâneos (fazenda-ano-época), espessura do pelame e idade do animal como covariável e os efeitos aleatórios aditivos diretos e de ambiente permanente. Antes das análises, a variável NC foi transformada para log10 (n + 1) e EC para (x + 0,5)½, em que n é o número de carrapatos contados no animal e x, o escore (0 a 4). A incidência de carrapatos foi maior no verão e, quanto maior a espessura do pelame, maior o nível de infestação. As estimativas de herdabilidade e repetibilidade foram, respectivamente, 0,22 e 0,29 para NC e 0,15 e 0,21 para EC; a correlação genética entre NC e EC foi igual a 1,00. Os resultados sugerem que é possível obter progresso genético para resistência a carrapato pela seleção.

Parâmetros e tendências da produção de leite em bubalinos da raça Murrah no Brasil

Objetivou-se estimar os parâmetros e avaliar as tendências genética e fenotípica para a produção de leite ajustada aos 305 dias em bubalinos da raça Murrah nascidos no período de 1982 a 2003. Os parâmetros e os valores genéticos foram estimados por meio do aplicativo MTDFREML. A tendência genética foi estimada pela regressão dos valores genéticos sobre o ano de nascimento, por duas metodologias: 1) regressão linear; 2) regressão por meio de polinômios articulados utilizando-se a função de alisamento spline. A herdabilidade e a repetibilidade estimadas foram de 0,20 e 0,36, respectivamente. As tendências (regressão linear) fenotípica e genética foram significativas e iguais a 32,86 e 0,85 kg/ano, respectivamente. O ganho genético foi positivo, constatando-se instabilidade na tendência genética no decorrer dos anos, com períodos de ganhos e outros de perdas genéticas. A maior parte do ganho observado em alguns períodos resultou de melhorias nas condições ambientais.

Repetibilidade da mensuração de imagens das características de carcaça obtidas por ultrassonografia em fêmeas Nelore

Avaliou-se a repetibilidade da mensuração de imagens de ultrassom da área do músculo longissimus dorsi (AOL) e das espessuras de gordura subcutânea do lombo (EGL) e da garupa (EGG). Imagens de ultrassom tomadas no lombo (entre a 12ª e a 13ª costela) e na garupa (entre os músculos gluteus medium e biceps femoris) de novilhas Nelore de 14 a 22 meses de idade foram classificadas em aceitáveis, marginais e rejeitáveis. As imagens aceitáveis e marginais foram mensuradas duas vezes por três técnicos em diferentes níveis de treinamento. Foram estimadas as repetibilidades entre e dentro de técnicos por classe de qualidade da imagem, para determinação do efeito da qualidade da imagem e do técnico no valor absoluto da diferença entre a primeira e a segunda mensuração dessas características. A repetibilidade para as imagens aceitáveis foi maior que para imagens marginais, tanto entre como dentro de técnicos. Na análise da diferença absoluta entre a primeira e a segunda interpretação, foram significativos os efeitos de técnico para AOL e EGL e de classe de qualidade da imagem para AOL. em geral, o técnico com maior experiência apresentou maiores valores de repetibilidade. É recomendável que a mensuração de imagens de animais de mesmo grupo contemporâneo seja feita por um único técnico.

Effects of age at first calving, gestation length and dry period on milk yield in a Gyr herd

Relationships of several reproductve traits and milk yield were studied in 716 Gyr cows at Sant'Ana da Serra farm, Mococa, State of São Paulo, a humid tropical climate region. Mean age at first calving was 49.8 +/- 0.4 months, with a coeficient of cariation (C. V.) of 20.8%. Only year of parturition significantly affected age at first calving (P < 0.01). Heritability, estimated from paternal half-sib correlations, was 0.91 +/- 0.20, a value considered unrealistically high. Overall mean gestation length was 287.7 +/- 0.5 days (C. V. = 3.3%) for 419 observations, with month and year of parturition having significant effects. Heritability estimate was 0.30 +/- 0.14. Overall mean dry period for 1.276 observations was 238 +/- 3 days (C. V. = 48%); repeatability estimate was 0.19 +/- 0.06. Estimated annual genetic trend for dry period was -0.6 days, phenotypic trend was 11.5 days, and environmental trend, 12.1 days. Month and year of parturition and cow age had no significant effect on dry period. Highest milk yield was obtained at fourth lactation. The gross correlation between milk yield and gestation period was 0.11, and between previous dry period and subsequent milk yield, 0.16. Normal gestations of 285 to 290 days were associated with higher milk yields. Milk yield increased as dry period advanced from 30 to 390 days, and declined as dry period continued beyond 390 days. Delays in first mating and a more extensive dry period decreased reproductive efficiency in the herd studied.

Repetibilidade de resposta superovulatória em vacas de raça Holandesa

The purpose of this study was to estimate the repeatability of transferable embryos in Holstein cows and to evaluate the effects of the year, season and order of the superovulation on the number of total structures, transferable embryos, non-transferable embryos and ovules. Four hundred and eighty-six superovulations were used in the analysis. The year of superovulation affected significantly all traits (P<0.01); however, we did not find effects of the season of the year. Superovulation order affected the total structures (P<0.01) and non-transferable embryos (P<0.05). The repeatability of the transferable embryo was 0.28 +/- 0.05. Positive correlations were found among total structures and transferable embryos (0.73) and total structure and ovule (0.51).

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)(2) plus Mg(NO3)(2) as chemical modifier,to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 mug l(-1) Ph in 0.2% v/v HNO3) were spiked with 25 mug l(-1) Bi. For a 20 mul aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rose wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 mug l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.

Effect of modifiers on thermal behaviour of Se in acid digestates and slurries of vegetables by graphite furnace atomic absorption spectrometry

The influence of sample preparation strategy of vegetables on the electrothermal behaviour of Se without and with chemical modifiers such as Pd(NO3)(2), Pd(NO3)(2) + Mg(NO3)(2), Pd(NO3)(2) + Cd(NO3)(2), pre-reduced Pd, Mg(NO3)(2), and Ni(NO3)(2) was investigated. Acid digestates and slurries of vegetables (0.1% m/v in 1% m/v HNO3 + 0.005% v/v of Triton X-100) were used to prepare reference solutions or slurries. For 10 mul of each modifier tested, pyrolysis and atomization temperatures were evaluated using pyrolysis and atomization curves, respectively. Best conditions, such as thermal stability, signal profile, repeatability and sensitivity were attained using Pd(NO3)(2) as chemical modifier. The following heating program (temperature, ramp/hold time) of the graphite tube of the Varian SpectrAA-800Z atomic absorption spectrometer was used: dry step (85 degreesC, 5/0 s; 95 degreesC, 40/0 s; 120 degreesC, 10/.5 s); pyrolysis step (1400 degreesC, 10/3s); atomization step (2200 degreesC, 1/2 s); clean step (2600 degreesC, 2/0 s). This pyrolysis temperature is 800 degreesC higher than when measuring without any modifier. For 20 muL sample volume and 10 mug Pd(NO3)(2), analytical curves in the 3.0-30 mug Se 1(-1) range were obtained. The method was applied for Se determination in acid digestates and slurries of 10 vegetable samples and one standard reference material (rice flower) and results were in agreement at 95% confidence level. Recoveries varied from 89 to 95% for spiked samples. The lifetime of the graphite tube was ca. 250 firings and the relative standard deviations (n = 12) for a typical acid digestate and slurry containing 20 mug Se 1(-1) were 3.8% and 8.3%, respectively. The limits of detection were 2.0 mug Se 1(-1) and 0.6 mug Se 1(-1) Se for digestates and slurries, respectively. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Effective thermal conductivity of beans via a steady-state method

Steady-state concentric cylinder equipment was used to determine the effective thermal conductivity of beans (Phaseolus vulgaris). The measuring cell had no heated end guards and its length to diameter ratio was 10.5. Glass beads were employed to assess the accuracy and repeatability of the experimental system under heat transfer conditions. The results agree well with those reported in the literature so that the system can be considered reliable. Corn was used to verify the system's accuracy under heat and mass transfer conditions. Again the results were satisfactory. Moisture migration was observed and measured during the tests with beans, but this behavior does not compromise thermal conductivity values if both thermal and mass transfer steady-states are correctly interpreted. The effective thermal conductivity increases linearly with increasing grain moisture content. Statistical regression leads to good estimates of the fitted parameters.

Evaluation of Ir, Ru, and W as permanent modifiers for the simultaneous determination of As, Bi, Pb, Sb, and Se in natural water by electrothermal atomic absorption spectrometry

Iridium-, Ru-, and W-coated platforms were prepared by thermal treatment of the transversely heated graphite atomizer and investigated for the simultaneous determination of As, Bi, Pb, Sb, and Se in tap water by electrothermal atomic absorption spectrometry. The maximum pyrolysis temperature for As and Bi increased in a modifier sequence W < Ru < Ir. For Pb, Sb, and Se, this sequence was W < Ru, It. Calculated characteristic masses in the presence of It, Ru, and W were 35, 33, and 35 pg for As; 63, 51, and 52 pg for Bi; 50, 32, and 34 pg for Pb; 40, 35, and 31 pg for Sb; and 39, 39, and 93 pg for Se, respectively. Ruthenium was elected as the optimum modifier.Repeatability of the measurements was typically < 6%. Recoveries of As, Bi, Pb, Sb, and Se added to tap water samples varied from 79 to 109%. Accuracy was also checked by analysis of five certified reference materials (CRMs) from the National Institute of Standards and Technology (NIST1640 - Trace Elements in Natural Water; NIST 1643d Trace Elements in Water) and High Purity Standards (Trace Metals in Drinking Water Standards, lots #812708, #591107, and #710710). A paired t-test showed that the results for the CRMs were in agreement at the 95% confidence level with the certified values. The graphite tube lifetime was about 650 firings. multi-element determination is particularly challenging due to the necessity of carefully optimizing compromise conditions.Based on the considerations listed above, the aim of this paper was to evaluate the behavior of Ir, Ru, and W as permanent modifiers for the simultaneous determination of As, Bi, Pb, Sb, and Se. The performance of the proposed procedure was also verified after the ETAAS analysis of tap waters and reference materials.

Fatores genéticos e de meio no intervalo de partos de caprinos leiteiros

The kidding intervals (IDP) of dairy goats raised in Southeastern Brazil were studied to quantify the influence of environmental factors and to estimate genetic parameters by means of least squares (MMQ) and restricted maximum likelihood (REML). The data analyzed were obtained from five farms and three breeds (Alpine, Saanen, and Toggenburg). The overall mean and standard error of IDP, as estimated by MMQ, were 339 +/- 12.70 days. The interaction of year x season of parturition influenced IDP. In two of the years studied, goats kidding at the end of the kidding season showed a shorter IDP when compared to those that were kidding after the end of the season. A quadratic trend of IDP over years was observed across the three kidding periods. For the three seasons. IDP increased from 1986 until mid-1989 and decreased thereafter. The heritability and repeatability of IDP, as estimated by MMQ and REML, were: 0.046 +/- 0.071 and 0.103 +/- 0.043, and 0.00026 and 0.08411, respectively. These estimates indicate that little genetic gain can be expected from selection for this trait.

Voltammetric sensor for sodium nitroprusside determination in biological fluids using films of poly-L-lysine

Sodium nitroprusside (NP), a commercial vasodilator, can be pre-concentrated on vitreous carbon electrode modified by films of 97.5%: 2.5% Poly-L-lysine (PLL): glutaraldehyde (GA). This coating gives acceptable anion exchange properties whilst giving the required improvement of adhesion to the glassy carbon electrode surface. Linear response range and detection limit on nitroprusside in B-R buffer pH 4.0, were 1 x 10(-6) to 2 x 10-(5) mol L-1 and 1 x 10(-7) mol L-1, respectively. The repeatability of the proposed sensor, evaluated in term of relative standard deviation, was measured as 4.1% for 10 experiments. The voltammetric sensor was directly applied to determination of nitroprusside in human plasma and urine samples and the average recovery for these samples was around 95-97% without any pre treatment.

A strain gauge tactile sensor for finger-mounted applications

This paper describes a strain gauge-based sensor used for measuring finger force. The theory, design, and sensor construction details are presented. It was constructed using metallic strain gauges and a carefully designed structure which has a protection de-vice that impedes the sensor damage when forces higher than 100 N are applied. Its dimensions are suitable for measuring thumb force, but the same design can be used for constructing smaller sensors for other fingers. It is rugged, presents linear response, good repeatability, resolution of 0.3 N, low hysteresis, and sensitivity of 0.12 V/N. It can be useful in rehabilitation engineering, biomechanics, robotics, and medicine.