Influence of HLA-DRB-1 alleles on the production of antibody against CSP, MSP-1, AMA-1, and DBP in Brazilian individuals naturally infected with Plasmodium vivax

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of oxygen atmosphere on LiNbO3 thin films prepared by Pechini process

Thin films of lithium niobate were deposited on the Pt/Ti/SiO2 (111) substrates by the polymeric precursor method (Pechini process). Annealing in static air and oxygen atmosphere was performed at 500°C for 3 hours. The films obtained were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The dielectric constant, dissipation factor and resistance were measured in frequency region from 10 Hz to 10 MHz. Electrical characterizations of the films pointed to ferroelectricity via hysteresis loop. The influence of oxygen atmosphere on crystallization and properties of LiNbO3 thin films is discussed.

Compositional influence on spectroscopic properties of Yb3+ doped tellurite glasses

Spectroscopic properties of ytterbium-doped tellurile glasses with different compositions are reported. Results of linear refractive index, absorption and emission spectra, and fluorescence lifetimes are presented. The studied samples present high refractive index (∼2.0) and large transmission window (380-6000nm). Absorption and emission cross-sections are calculated as well as the minimum pump laser intensity. The results are compared with the values of other laser materials, in order to investigate applications as laser media in the infrared region.

The influence of the flame structure on the combustion oscillations in a cylindrical chamber

An experimental study has been conducted with the objective of investigating the effects of the flame structure in the combustion oscillation conditions into a laboratorial scale cylindrical chamber. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. To analyze the flame structure the image tomographic reconstruction process were used, and the resultant images were associated to the oscillatory conditions (frequency and amplitude) into the combustion chamber. The main conclusions were: 1) when the flame premixed condition increase, for example 60% of the total air flow rate is premixed with LPG, the region of intense energy released is close to burner exit and strong amplitudes of oscillation (close to 50 mbar) were obtained into the chamber; 2) for long flames, predominantly diffusive flames, just weak amplitudes were detected, in the spite of the speaker exiting the premixed flow; 3) when the energy is released distributed through the combustion chamber, the long flame acts like a baffle. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Foraging activity of Protopolybia exigua (Hymenoptera, Vespidae) in different phases of the colony cycle, at an area in the region of the Médio São Francisco River, Bahia, Brazil

In this work, the foraging activity of Protopolybia exigua (de Saussure) was studied, aiming to verify the amplitude of the foraging time, the relation between the physical factors of weather (temperature, relative air humidity, luminosity and wind speed) and the daily activity of searching for resources, as well as to analyze the influence of the colony development phases and the number of individuals (adults and immatures) engaged in such activity. The study was carried out in two areas of the city of Bom Jesus da Lapa, Bahia, Brazil, during the period from January to June 2006, when the observation of 12 colonies of P. exigua was performed. The results revealed this species presented an amplitude of activity of almost 13 hours. There was an average of 44.4 nest exits and 37.6 returns a day by the nest workers and the Returns with Resources Index for this species was 93.5%. The foraging activity increased as of 10:01, and became more intense, with the peak from 1:01 p.m. to 4:00 p.m., when the highest temperatures (°C) and the lowest values of relative air humidity (%) were observed. The colonies that had a larger number of larvae presented a higher average number of trips to the field per hour (10.94) and the number of females in the colony tends to induce foraging activity. There were no differences between the numbers of nest exits by the workers regarding the three phases of colony development.

Frequency of the HFE C282Y and H63D polymorphisms in Brazilian malaria patients and blood donors from the Amazon region

Malaria is an endemic parasitosis and its causitive agent, Plasmodium, has a metabolism linked to iron supply. HFE is a gene with the polymorphisms C282Y and H63D, which are associated with a progressive iron accumulation in the organism leading to a disease called hereditary hemochromatosis. The aim of the present study was to determine the allelic and genotypic frequencies of the HFE gene polymorphisms in malaria patients and blood donors from the Brazilian Amazon region. We screened 400 blood donors and 400 malaria patients for the HFE C282Y and H63D polymorphisms from four states of the Brazilian Amazon region by polymerase chain reaction and restriction fragment length polymorphism analysis. We did not find any C282Y homozygous individuals, and the only five heterozygous individuals detected were from Pará State. The most frequent genotype in the North region of Brazil was the H63D heterozygote, in both study groups. Our results contribute to the concept that the Brazilian Amazon region should not be regarded as a single entity in South America. These polymorphisms did not influence the symptoms of malaria in the population studied, as neither severe signs nor high parasitemia were observed. Therefore, different hereditary hemochromatosis diagnostic and control measures must be developed and applied within its diverse locations. Investigations are currently being carried out in our laboratory in order to determine the importance of the coexistence of hereditary hemochromatosis in patients affected by parasitic diseases, such as malaria. ©FUNPEC-RP.

Influence of storage period and effect of different brands of acrylic resin on the dimensional accuracy of the maxillary denture base

The aim of this study was to evaluate the dimensional changes of denture bases made from different resins after different storage periods. For this purpose, 25 sets of plaster models/resin bases were prepared using 4 acrylic resins submitted to two types of polymerization: 1- QC-20 submitted to polymerization by microwave energy; 2- QC-20 submitted to polymerization by water hot bath; 3- Vipi Cril submitted to polymerization by water hot bath; 4- Vipi Wave submitted to polymerization by microwave energy; and 5- Onda Cryl submitted to polymerization by microwave energy. After polymerization, the specimens were sectioned for accuracy readings using a comparison microscope. Readings were taken at 3 points: the crests of the right (A) and left (B) ridges, and the median region of the palate, in 4 different periods. The data obtained were submitted to two-way ANOVA and Tukey's test at 5% significance level. The greatest distortions were found in the posterior palatal region of the base (M), with statistically significant difference (p<0.05) for the studied resins. All acrylic resins presented dimensional changes and the storage period influenced these alterations.

Influence of voids in the hybrid layer based on self-etching adhesive systems: a 3-D FE analysis

The presence of porosities at the dentin/adhesive interface has been observed with the use of new generation dentin bonding systems. These porosities tend to contradict the concept that etching and hybridization processes occur equally and simultaneously. Therefore, the aim of this study was to evaluate the micromechanical behavior of the hybrid layer (HL) with voids based on a self-etching adhesive system using 3-D finite element (FE) analysis. Three FE models (Mr) were built: Mr, dentin specimen (41x41x82 μm) with a regular and perfect (i.e. pore-free) HL based on a self-etching adhesive system, restored with composite resin; Mp, similar to M, but containing 25% (v/v) voids in the HL; Mpp, similar to Mr, but containing 50% (v/v) voids in the HL. A tensile load (0.03N) was applied on top of the composite resin. The stress field was obtained by using Ansys Workbench 10.0. The nodes of the base of the specimen were constrained in the x, y and z axes. The maximum principal stress (σmax) was obtained for all structures at the dentin/adhesive interface. The Mpp showed the highest peak of σmax in the HL (32.2 MPa), followed by Mp (30 MPa) and Mr (28.4 MPa). The stress concentration in the peritubular dentin was high in all models (120 MPa). All other structures positioned far from voids showed similar increase of stress. Voids incorporated into the HL raised the σmax in this region by 13.5%. This behavior might be responsible for lower bond strengths of self-etching and single-bottle adhesives, as reported in the literature.

Influence of medium composition in the production of ethanol by Zymomonas mobilis

The production of ethanol using Zymomonas mobilis had been reported to be three to four times larger than with Saccharomyces cereviseae. The influence of pH, temperature and composition of the means of fermentation are parameters that can direct the metabolism for the production of ethanol. The objective of this study was to evaluate the production of ethanol by Zymomonas mobilis CCT 4494, by variations of the initial pH, temperature and concentrations KCl, K 2SO4, MgSO4, CaCl2 and sucrose, by a factorial experimental design of type 27-2, according to the model proposed by Box et al. (1978). For this, the broth of sugar cane was used as sole carbon source, because it is cheap and easily accessible in the region of São José do Rio Preto, São Paulo State. According to the experimental design, the bacteria Zymomonas mobilis CCT 4494 has adapted in the fermentation mean containing high concentrations of sucrose, and supported the change of pH and temperature of fermentation. The highest amount of ethanol produced was 8.89 mg mL-1. This is not similar to the levels of secondary metabolites produced by Zymomonas mobilis CCT 4494.

Influence of hydric stress in the production of toxic principles in Nerium oleander L.

Many plants utilized in the urban center shows substances considered toxic whose production could be influenced by some factors, like hydric stress, including ornamental Nerium oleander L., widely used in gardens in various parts of the world, which presents production of cardioative glucosides, considered toxic. This study had the objective to evaluate the effect of field capacity in the biomass and the level of cardioative glucosides in seedlings of Nerium oleander. The experiment was carried at UNIDERP, in Campo Grande City, Mato Grosso do Sul State, Brazil, at the University for Development of State and Pantanal Region, using the experimental delineation in randomized blocks. There were 4 treatments (25%; 50%; 75% and 100% of the field capacity), 5 replications and 4 plants by parcel, totalling 80 plants. The evaluations were realized 60 days after the seedlings were planted. The quantitative analysis of the cardioative glucosides was realized by gravimetric test, after selective extraction of the glucosides. Were conclude that increase of the quantity of water in the soil raised the biomass production until 75% of the field capacity and increased the level of cardioative glucosides, showing that water management is very important and should be provided only the necessary to development of the plant.

Uniconazole on mango floral induction cultivar 'Kent' at submedio são francisco region, Brazil

In order to provide efficient crop management which enables the scaling of the production of mango in semi-arid conditions and achieve a greater precision in the recommendation, evaluating the effect and the influence of uniconazole foliar spray, on the emission of vegetative flushes in the cultivar 'Kent', field tests were carried out in a productive orchard. Treatments tested were three uniconazole dosages, 500, 1,000 and 1,500 mg L-1, with one, two or three respective foliar sprayings. Another treatment with paclobutrazol was used at 2.0 g a.i./m of canopy diameter, with a single application via soil and a control (without spraying of plant growth regulators), where spreader-sticker was added and the pH was adjusted. With 30, 60 and 90 days after the first spraying of the flowering inducer the growth of branches were evaluated, as well as the percentage of flowering in all treatments after 120 days of first spraying. The sprayings started in the orchard after the emission of the second vegetative flush after pruning of production, through airassisted sprayer with flow rate of 1,000 L ha-1. The experimental design was done through randomized blocks with four replications, using three plants per plot. It was observed that paclobutrazol was significantly highlighted in relation to other treatments and that the uniconazole with one, two and three foliar sprayings presented inhibition of the vegetative growth in mango 'Kent' and showed, even at low proportions, signs of flowering.

Influence of apical enlargement in cleaning and extrusion in canals with mild and moderate curvatures

Optical microscopy and morphometric analysis were used in this study to evaluate, in vitro, the cleaning of the apical region in root canals with mild or moderate curvatures subjected to biomechanical preparation with a rotary system, as well as to assess the amount of extruded material to the periapical area. Lateral incisors (n = 32), 16 with curvature angles smaller or equal to 10° (GI) and 16 between 11° and 25° angles (GII) were submitted to Hero 642 rotary instrumentation with different surgical diameters: (A) 30.02 and (B) 45.02. Irrigation was performed at each change of instrument with 5 mL of ultrapure Milli-Q water and the extruded material through the apical foramen was collected. Root cross-sections were subjected to histological analysis by optical microscopy (×40) and the images were evaluated morphometrically using the Image Tool software. Quantification of the extruded material was performed by weighing after liquid evaporation. ANOVA showed no statistically significant differences (p>0.05) among the groups with respect to the procedures used to clean the apical region. Considering the amount of extruded material, the Tukey's HSD showed that canals with mild curvature prepared with the 45.02 surgical diameter showed significantly higher values (p<0.05) that those of the other groups, which were similar between themselves (p>0.05). In conclusion, the effect of cleaning the apical region did not differ in the groups, considering root curvature and the surgical diameter of instruments used for apical preparation. The amount of extruded material was greater in canals with mild curvature that were prepared with the 45.02 surgical instrument diameter.

Influence of δβ-thalassemia or regulatory elements in individuals with increased fetal Hb levels in the São Paulo northwest population

Fetal hemoglobin (Hb F), formed by two alpha globin chains (α) and two gamma chains (γ) (α2 γ2), has reduced expression in adults, ranging from 0 to 1% of total hemoglobin. Increased levels of Hb F are due to mutations in the β-globin family, which cause hereditary persistence of fetal hemoglobin (HPFH) and delta-beta thalassemia (δβ-thalassemia).The control of the production takes place by the regulatory region and regions outside the β-globin family, among them 2q16, 6q23, 8q, and Xp22.2.The aims of this study were to determine the presence and frequency of two mutations for δβ-thalassemia, the XmnI polymorphism and β-globin haplotypes in healthy individuals with increased Hb F in the State of São Paulo. We analyzed 60 samples of peripheral blood of healthy adults, without complaints of anemia. The samples were separated into two groups according to Hb F level: group I - 34 samples with Hb F ranging from 2 to 15% and group II - 26 samples with Hb F over 15%. In relation to the polymorphisms examined, we found three heterozygous individuals (5%) for Spanish δβ-thalassemia, belonging to group I, whose Hb F levels were within the normal range.The Sicilian δβ-thalassemia mutation was not found, indicating the need to study other polymorphisms related to the increase of Hb F in adult life.The frequency of XmnI polymorphism was 33.3% and the mean Hb F levels were 15.48 ± 11.69%.The frequency observed in our study for this polymorphic site is higher than that found in the literature for healthy subjects.This polymorphism was more prevalent in individuals with Hb F levels below 15%. For four samples positive for this polymorphism, the Hb F levels were explained by the presence of HPFH and Spanish δβ-thalassemia mutations, so that the presence of the XmnI polymorphic site was not a determinant in the overexpression of γ-globin genes. Regarding β-globin haplotypes, 18 alleles and 27 distinct genotypic patterns were found.The pattern Atp1/Atp2 was the mostfrequent genotype (13.72%).Of the 18 alleles, 13 showed atypical patterns.The results show that the haplotype V was the most frequent (27.45%), followed by atypical Atp2 (13.72%) and Atp1 (11.76%), and that there was a higher correlation with the presence of HPFH and XmnI polymorphism.The high frequency of haplotype V in our samples and high frequency of atypical haplotypes may reflect a high rate of miscegenation in this population, suggesting an ethnic characteristic for the Brazilian population, requiring the evaluation of population genetic markers to corroborate this hypothesis. © FUNPEC-RP.

Photoelastic analysis of the influence of residual ridge inclination in conjugated class i mandibular prostheses with different attachment systems

Objectives: The aim of this study was to evaluate the stress distribution in mandibular free-end removable partial dentures (RPD) associated with FPD in the abutment teeth considering different inclinations of the residual ridge: (1) horizontal and (2) distal descending ridges and two designs of free-end RPD with different attachment systems were tested: (1) clasp and (2) system ERA. Methods. Axial loads (100 N) were applied on the teeth of the RPD. The images were recorded and the stress distribution was evaluated through photoelastic fringes. Results. In general, the distal descending ridge presented more photoelastic fringes in the region of the roots of the abutment teeth while the horizontal ridge exhibited higher compression in the base of the prosthesis. In the horizontal ridge, the denture with clasp presented more favourable stress distribution than the denture with the system ERA. In the distal descending ridge, the denture with the system ERA relieved the region of the abutment teeth and overloaded the residual ridge. Conclusion: The horizontal ridge presented more favourable performance; the dentures with clasp exhibited better performance for both ridges evaluated; the denture with the system ERA presented better results in the distal descending ridge. © 2013 Informa Healthcare.

Evaluation of weather influence on mechanical and viscoelastic properties of polyetherimide/carbon fiber composites

In order to investigate how environmental degradation affects the mechanical and thermal performance of polyetherimide/carbon fiber laminates, in this work different weathering were conducted. Additionally, dynamic mechanical analysis, interlaminar shear strength tests and non-destructive inspections were performed on this composite before and after being submitted to hygrothermal, UV radiation and thermal shock weathering. According to our results, hygrothermally aged samples had their glass transition temperature and elastic and storage moduli reduced by plasticization effect. Photooxidation, due to UV radiation exposure, occurred only on the surface of the laminates. Thermal shock induced a reversible stress on the composite's interface region. The results revealed that the mechanical behavior can vary during weather exposure but since this variation is only subtle, this thermoplastic laminate can be considered for high-performance applications, such as aerospace. © The Author(s) 2013.