The effect of adhesive systems on the pullout strength of a fiberglass-reinforced composite post system in bovine teeth

Purpose: To evaluate the pullout strength of a glass fiber-reinforced composite post (glass FRC) cemented with three different adhesive systems and one resin cement. The null hypothesis was that pullout strengths yielded by the adhesive systems are similar. Materials and Methods: Thirty bovine teeth were selected. The size of the specimens was standardized at 16 mm by sectioning off the coronal portion and part of the root. The specimens were divided into three groups, according to the adhesive system, which were applied following the manufacturers' instructions: G1, ScotchBond Multi-Purpose Plus; G2, Single Bond; G3, Tyrian SPE/One-Step Plus. The glass FRCs (Reforpost) were etched with 37% H3PO4 for 1 min and silanized (Porcelain Primer). Thereafter, they were cemented with the dual resin cement En-Force. The specimens were stored for 24 h, attached to an adapted device, and submitted to the pullout test in a universal testing machine (1 mm/min). The data were submitted to the one-way ANOVA and Tukey's test (α = 0.05). Results: G1 (30.2 ± 5.8 Kgf) displayed the highest pullout strength (p < 0.001) when compared to G2 (18.6 ± 5.8 Kgf) and G3 (14.3 ± 5.8 Kgf), which were statistically similar. Analysis of the specimens revealed that all failures occurred between the adhesive system and the root dentin (pullout of the post cement), regardless of group. Conclusion: The multiple-bottle, total-etch adhesive system provided higher pullout strength of the glass FRC when compared to the single-bottle, total-etch, and single-step self-etching adhesive systems. The null hypothesis was rejected (p < 0.001).

Fiberglass-reinforced glulam beams: Mechanical properties and theoretical model

The glued-laminated lumber (glulam) technique is an efficient process for making rational use of wood. Fiber-Reinforced Polymers (FRPs) associated with glulam beams provide significant gains in terms of strength and stiffness, and also alter the mode of rupture of these structural elements. In this context, this paper presents a theoretical model for designing reinforced glulam beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

Utilização de meios alternativos e diferentes tipos de recipientes no cultivo de Ankistrodesmus gracilis (Reinsch) Korshikov (Chlorophyceae) em laboratório

A laboratory culture of Ankistrodesmus gracilis algae was evaluated by studying the biology of the species and its chemical composition in a traditional medium (CHU 12) and in two alternative culture media, NPK (20-5-20) and macrophyte (Eichhornia crassipes) + NPK, in three different types of recipients (fiberglass, carboy and plastic bag). First peak in the growth curve of Ankistrodesmus gracilis occurred on the ninth day in macrophyte + NPK medium (74.16 x 10 5 cells mL -1) in a fiberglass recipient. However, highest density (p < 0.01) was reported in medium CHU 12 (122.87 x 10 5 cells mL -1) in a plastic bag on the twelfth day. Cell density was over 70 x 10 5 cells mL -1 starting on the twelfth day. Growth rate of A. gracilis was similar (p > 0.05) in culture media in the three recipients. Protein and fiber were similar (p > 0.05) in the treatments, but lipids were higher (p < 0.05) in NPK. Nitrate, ammonia, total phosphorus and orthophosphate contents were over 1 mg L -1 in NPK (p < 0.01). Results show that alternative media, such as NPK and macrophyte + NPK, are possible for large-scale culture of A. gracilis cultured in three types of recipients. Costs are low, occupying less space when cultured in plastic bags and in the laboratory.

Fracture resistance of composite resin cores with or without prefabricated posts over different substrates

The fracture resistance of endodontically treated teeth has been an obstacle to the durability of the remaining teeth and restorations. The aim of this study was to evaluate the fracture resistance of endodontically treated bovine and human teeth that were restored with either prefabricated metal posts, glass fiber posts, or composite resin cores. Statistical analysis revealed significant difference between different substrates, but there was no statistically significant difference between different types of intraradicular posts or in the interaction between substrate and post types. The intraradicular posts do not increase the fracture resistance of endodontically treated teeth. The metal posts presented more unfavorable fracture modes when compared to glass fiber posts and composite resin cores.

Production of an axial piston: Impacts resulting from the substitution of steel by a polymer-based material

The substitution of steel as a raw material in the production of axial pistons for pressure washers by polyphthalamide, polytetrafluoroethylene and glass fiber-based composite was studied. The new production process with composite consists of only two steps, while the production of the steel piston is to comprise of thirteen steps. This replacement would result in an estimated reduction of 80% of water consumption, 83% of electricity consumption, 73% of the total cost and 88% of the final mass. With regard to the main mechanical properties required for the end product, the composite was found to withstand the critical axial loads and it shows acceptable wear resistance in an environment without lubrication, an additional advantage of this replacement. © 2012 Elsevier Ltd. All rights reserved.

Effects of a homeopathic complex on the performance and cortisol levels in Nile tilapia (Oreochromis niloticus)

Background: Intensive fish farming results in stress adversely effecting the performance of farmed fish. Plasma cortisol is a validated measure of stress in fish. We evaluated the effect of a homeopathic complex on the cortisol level of Nile tilapias (Oreochromis niloticus). Method: 60 animals with approximate average weight of 100 g each at the start of experiment were randomly distributed in six glass fiber water tanks, capacity 1000 liters, with a daily water renewal rate of 20%. They received one of two treatments: 30 animals in control treatment and 30 animals receiving the homeopathic complex Homeopatila 100. On days 1, 30 and 60, all fish were anesthetized and blood was collected by puncture on the caudal vein, to determine the levels of circulating cortisol. Results: At the end of the experiment the fish receiving a homeopathic complex, had significantly lower circulating cortisol level (17.96 ng/mL ± 0.95) than the control group (38.68 ng/mL ± 1.21) (p < 0.05). Conclusions: Cortisol levels were significantly lower in the treated group than control, and the fish were larger in the treated group. © 2013 The Faculty of Homeopathy.

Influência do sistema de cimentação adesiva e da fonte de luz fotoativadora na resistência à extrusão de pinos de fibra de vidro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da resistência à fratura de raízes fragilizadas reabilitadas por diferentes técnicas de construção de núcleos intra-radiculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação das propriedades mecânicas e químicas em função de diferentes cimentos resinosos e pinos não-metálicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do condicionamento ambiental nas propriedades de cisalhamento e viscoelásticas de compósitos híbridos metal-fibra

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da interface adesiva entre cimentos resinosos e diferentes terços da dentina intrarradicular

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da inclusão de fibras de vidro na resistência flexural e módulo de elasticidade de resinas compostas indiretas em função da espessura e do padrão de poilimerização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de diferentes procedimentos restauradores na resistência á fratura de dentes com cavidade classe IV submetidos ao clareamento dental interno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da cimentação de pinos não metálicos na dentina intraradicular utilizando cimentos resinosos auto-adesivos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistência a extrusão de retentores intra-radiculares de fibra de vidro avaliando: técnica de confecção e cimento resinoso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)