Procedures to Evaluate the Efficiency of Protective Clothing Worn by Operators Applying Pesticide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tricot stitched carbon fiber reinforced polymer composite laminates manufactured by resin transfer molding process: C-scan and flexural analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatigue crack growth rate in mode I of a carbon fiber 5HS weave composite laminate processed via RTM

Delamination or crack propagation between plies is a critical issue for structural composites. In viewing this issue and the large application of woven fabrics in structural applications, especially the ones that requires high drapeability to be preformed in a RTM mold cavity such as the asymmetric ones, e.g HS series, this research aimed in dynamically testing the carbon fiber 5HS/RTM6 epoxy composites under opening mode using DCB set up in order to investigate the crack growth rate behavior in an irregular surface produced by the fabric waviness. The evaluation of the energy involved in each crack increment was based on the Irwin-Kies equation using compliance beam theory. The tests were conducted at constant stress ratio of R=0.1 with displacement control, frequency of 10 Hz, in accordance to ASTM E647-00 for measurement of crack growth rate. The results showed large scatter when compared to unidirectional carbon fiber composites due to damage accumulation at the fill tows.

Processamento e caracterização de compósito fibra de sisal/resina epóxi via RTM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tutaméia: labirinto de imagens e símbolos

Pós-graduação em Estudos Literários - FCLAR

Produção e imobilização de celulases em matriz de agarose com diferentes ativações químicas

Pós-graduação em Biotecnologia - IQ

Método para avaliação de risco ambiental de acidentes de trânsito envolvendo produtos perigosos usando análise multicritério

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of fiber orientation on the shear behavior of glass fiber/epoxy composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O clima urbano de Assis/SP: estudo comparativo da temperatura e umidade relativa entre a cidade e o campo

It is known that the urban environment modifies the energy balance between the surface and the atmosphere, causing changes in temperature, relative humidity, among other things, opening the way for studies aimed at urban climatology. Based on the theme of urban climate, this research focuses on the city of Assis, located west of São Paulo. The generation of urban climate is a result of various factors, among which stand out: the use and different land use, the thermodynamic properties of buildings, number of buildings in the urban, socioeconomic activities, etc.. In general, this increases the temperature and reducing relative humidity, providing thermal discomfort. The rural environment is used for comparison studies to this theme by presenting different characteristics in relation to the structure, morphology and urban functionality. The main objective of this study is to determine the characteristics of temperature and humidity environments with the habits and occupations of the different soils in winter, at night, one inserted into the urban fabric of Assis and the other in the rural environment, to verify for evidence of changes in climatic elements because of urbanization. To collect the data will be used mini automatic weather stations that record data on temperature and humidity. For analysis of the results will be made between the data obtained in the city and the countryside, developing graphics application using Excel to tabulate the data. It was found that there were differences in the thermo-hygrometric data collection points, showing a specific urban climate in the city of Assis

Cálculo das funções de anisotropia e radial de dose para braquiterapia com semente de 192Ir em diferentes materiais de interesse em radiologia com o auxílio do programa baseado no método de Monte Carlo MCNPX

The brachytherapy braquiterapia is an x-ray modality radiotherapy in which stamped or halfstamped radioactive sources in format of seeds are used, wires or to one short distance, in contact or implanted to the fabric to be treated. All the treatment modalities require a previous planning. The formalism recommended for calculation of dose was considered by the AAPM for the first TG-43 Report. In it distributions of dose of isolated seeds measured and calculated by Monte Carlo method in water instead of with models half-empiricists. In this work we in accordance with present some preliminary results of the calculation of functions of radial anisotropy and of dose in the distance for seed of 192Ir, wide used in brachytherapy treatments of high tax of dose (HDR), with the aid of the program based on the Monte Carlo method MCNPX v2.50 (Mount Carlo N ParticleeXtended). The materials chosen in the simulation beyond water, had been MS20 and estriado muscle

Estudo teórico das funções de anisotropia e radial de dose para braquiterapia com semente de Ir192 em diferentes materiais de interesse em radiologia

The brachytherapy braquiterapia is an x-ray modality radiotherapy in which stamped or halfstamped radioactive sources in format of seeds are used, wires or to one short distance, in contact or implanted to the fabric to be treated. All the treatment modalities require a previous planning.The formalism recommended for calculation of dose was considered by the AAPM for the first TG-43 Report. In it distributions of dose of isolated seeds measured and calculated by Monte Carlo method in water instead of with models half-empiricists.In this work we in accordance with present some preliminary results of the calculation of functions of radial anisotropy and of dose in the distance for seed of 192Ir, wide used in brachytherapy treatments of high tax of dose (HDR), with the aid of the program based on the Monte Carlo method MCNPX v2.50 (Mount Carlo N ParticleeXtended).The materials chosen in the simulation beyond water, had been MS20 and estriado muscle

Caracterização de compósitos produzidos por VARTM para aplicações aeronáuticas

In recent years the aeronautic industries has increased investment in areas of technological research aiming at materials that offer better performance, safety, weight reduction and fuel consumption. For this reason the most studied materials are polymeric materials, due to their higher mechanical strength and higher stiffness. This work evaluated characteristics of two composite laminates produced from the same process, but they differed only in regions where the resin was injected and the vacuum position. The composite laminates were SC-79 resin reinforced with glass fiber fabric (plain weave) processed via VARTM. For this reason the material was subjected to mechanical tests such as: tensile, and fatigue following standards ASTM D 3039 and ASTM D 3479, respectively. The latter was observed the S-N curve. It was performed the ultrassonic C-scan analysis to check impregnation of the fiber. Considering that the process was the same for the two laminates, with small variations in the injection and in vacum ports, it was expected to find similar characteristics

Desenvolvimento da malha urbana de Guaratinguetá e propostas de intervenção

The work consists of the historical city of Guaratinguetá, as well as data on their quality of life, economic development and population, transportation in Brazil and the transportation system of the city serving as a basis to support the development of the urban network. The urban fabric of the city was raised with plants of the city in different years, documents obtained by the Museum and Hall of Frei Galvão Guaratinguetá well to check the form of land use and growth drivers of the city over time. We studied also the main access roads to the city by focusing on an approach that has been the subject of a proposed urban intervention. A direct interview was performed and recorded with one of those responsible for planning the urban fabric of the city in order to gather information on the historical development, the future possibilities of interventions in the urban as well as problems encountered and other curiosities. Through the study it was observed that the urban grid Guaratinguetá developing a planned since 1970 and that the highlights of most cities in the Paraíba Valley. The work is grounded in concepts of sustainable city and also in quantitative and qualitative data from sectors responsible

Análise do conforto térmico da cidade de Mirandópolis/SP em seus espaços abertos

Mirandópolis/SP appeared in 1934 from the railroad “the Brazil Northwest”, that there it served one of the points of its stretch that had as main function to drain the agricultural production northwestern native of São Paulo of that time. The installation of the town happened absent of concerns with initial urbanístico planning, thus modifying its natural landscape and modifying characteristic ambient without compensatory measures aiming at a future expansion of the urban mesh. Fact this that still causes today consequences the quality of life of the people and also the observed thermal comfort later. Ahead of this, the present work had for objective to identify through measurements of temperature and relative humidity of the city of Mirandópolis/SP the differences that in the fabric urban they corroborate for a comfort situation or thermal discomfort to the outdoors in accordance with the Diagram Bioclimático de Olgyay the collection of data was made throughout the month of July of 2011 involving the attainment of information of Temperature and relative humidity of air and questionnaire applied to the passer-bys in the act of the measurements. Also approaching the different thermal dynamic of the zones of housing in relation to the Urban Cannyon that develops the commerce as predominant activity. This research sample that, although a city to be small, the quality of life of its inhabitants is not only guaranteed by the transport or that its thermal comfort reveals inside homogeneous of the urban perimeter, but that it has yes heterogeneidade in the scope of the urban climate in these spaces

Comparação de compósitos obtidos via RTM de resina epóxi e fibra de carbono com e sem descontinuidade nos tecidos

Technology is growing interest in the use of composites, due to the requirement of lighter materials and more resistant, factors essential to meet the project specifications and reduce the operational cost. In the production of high performance structural composites, considering the aerospace criteria, the domestic industry has shown interest in the process of resin transfer molding (RTM) for reproducibility and low cost. This process is suitable for producing components of polymeric composites with relatively simple geometries, consistent thicknesses, high quality finish with no size limitations. The objective of this work was machined carbon steel to make a matched-die tooling for RTM and produce two composite plates of epoxy resin and carbon fiber fabric with and without induced discontinuities, which were compared towards their impregnation with ultrasound, their properties via tensile tests and thermal analysis. In ultrasonic inspection, it was found good impregnation of the preform of both composites. In the thermal analysis it was possible to check the degradation temperature of the composites, the glass transition temperature and it was found that the composites showed no effective cure cycles, but presented good performance in the tensile test when compared with aluminum alloy 7050 T7451 . The results showed that the injection strategy was appropriate since the laminate exhibited a good quality for the proposed application