64 resultados para Dynamometer


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of the present study was to compare in which part (lower limb or upper limb) the repeated bout effect has the greatest magnitude. Twelve males individuals with no recent (6 months) experience with resisted training participated in this study. The subjects were randomly divided into two groups (legs and arms) and came to the laboratory 5 times. 1st) adaptation to the dynamometer. 2nd) to perform one bout of eccentric exercise (EE) and provide markers such as isometric peak torque (IPT), delayed onset muscle soreness (DOMS) (both collected before and after the bout) and concentration of the creatine kinase (CK) enzyme in the blood (only before the bout). 3rd) 48 after the first bout the same markers were collected again. After 14 days, the methodologies used in the 2nd and 3rd visits to the laboratory were repeated respectively to determine the repeated bout effect. A significant decrease of IPT and a significant increase of CK and DOMS were found immediately after and 48 hours after the first bout of EE for the arms group. The legs group showed a significant increase in CK (48 hours after the EE) and DOMS (immediately after the EE) resulting from the first bout. In the arms group, the second bout did not cause significant increase in CK or DOMS on any of the situations, however, it provoked a decrease in force production immediately after the EE. The legs group showed a significant increase of DOMS immediately after the second bout of EE, which caused no significant increase in CK. The only marker in which the repeated bout effect happened for both groups was CK. No significant difference was found between the protections for both groups. Taking into account the results, it’s been discussed whether there is a relation between the susceptibility to muscle damage and the repeated bout effect, and also...(Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introduction: Loss of muscle strength may represent a burden on everyday tasks significantly compromising the quality of life for mastectomy patients. In addition to the reduced strength of the upper limb, has been shown in mastectomy patients and difficulties in reducing grip. Objectives: To analyze the possible differences in grip strength among women undergoing breast cancer surgery and to compare the body composition. Methods: In the control group (CG n = 46) women participated in the community of FCT / UNESP aged 35 to 70 years without acute orthopedic pathologies. In the experimental group (EG n = 49) participated in women undergoing surgery for breast cancer, without bilateral lymphedema and independent of time and type of surgery. Were evaluated by dynamometer, by Dual Energy X-ray absorptiometry (DEXA) and physical assessment. Results: We observed significant differences in grip strength (p = 0.000), when the group after mastectomy compared with the control group and the radical mastectomy surgery left and quandrandectomia left (p = 0.004). Regarding the presence of lymphedema, statistical difference was observed in the composition of lean mass and trunk fat (p = 0.05). Conclusion: The results of this study suggest that the experimental group are lower grip strength and trunk lean body mass when compared with the control group. The experimental group showed higher values of fat mass when there was presence of lymphedema

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this study was to investigate the influence of previous active static stretch on the isometric peak torque (PT) and rate of force development (RFD) measured from different time intervals from the beginning of muscle contraction. Participated of this study 15 male individuals, apparently healthy, with ages between 18 and 25 years, without regular physical activity practice. The individuals were submitted in different days to the following tests: 1) Familiarization session to the isokinetic dynamometer; 2) Two maximal isometric concentric contractions for knee extensors in isokinetic dynamometer to determine PT and RFD (Control), and; 3) Two active static stretching exercises for the dominant leg extensors (10 x 30 s for each exercise, with 20 s of rest). After the stretching, the isokinetic test was repeated (Post-Stretching). The conditions 2 and 3 were performed in random order. The RFD was considered as the mean slope of the moment-time curve at time intervals of 0-30, 0-50 and 0-100ms relative to the beginning of muscle contraction. It was verified significant reduction for both maximal RFD and PT after the stretching (p < 0.05). At intervals of 0- 30ms, 0-50ms and 0-100ms, the RFD at the conditions with stretching was similar to the RFD without stretching (p > 0.05). At intervals of 0-150ms and 0-200ms, the RFD obtained at the contraction without stretching was significantly higher that that obtained at the contraction with stretching (p < 0.05). It can be concluded that the static stretching, performed with duration of 600 s diminish isometric PT, maximal RFD and RFD measured at late phase (> 100 ms) of muscle contraction.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of the present study was to compare the effects of a high speed isokinetic training (180°.s-1) and an isometric training (75°) on the maximum rate of force development (RFDmax) measured in the isokinetic and isometric modes. Twenty seven male non active subjects participated of this study (Mean + SD = body mass 78.6 + 14.1 kg; stature 175.1 + 8.9 cm; age 22.6 + 3.8 years). They were randomly divided into three groups: Control (GC); Isokinetic training (GISOC) and; Isometric training (GISOM). The subjects were submitted in different days to the following pre training protocols: 1) Familiarization to the isokinetic dynamometer tests; 2) Five maximum concentric isokinetic contractions of the knee extensors (180°.s-1) to access the maximum concentric torque (TMC) and the concentric RFDmax; 3) Two maximum isometric contractions of the knee extensors (75°) to access the maximum isometric torque (TMI) and the isometric RFDmax. The same tests were repeated after the training period, but without the familiarization session. Eighteen training sessions were performed (3 times per week). The GISOC performed the entire training whit concentric isokinetic contractions whit the speed of 180°.s-1. The GISOM performed the entire training whit isometric contractions whit the angle between the thigh end the leg being 75° (0° = full knee extension). TMI, TMC, concentric RFDmax, isometric RFDmax values of the GC was not different between pre and post training. GISOM increased only the TMI and the GSIOC increased the TMC, concentric RFDmax and isometric RFDmax. Furthermore, the GISOC had a higher percentage increase of the isometric RFDmax than the isokinetic RFDmax. Based on these results, it is possible to conclude that the increase in maximum strength corresponded to the training specificity theory, unlike to the RFDmax. Thus the use of isometric contraction ...(Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this study was to investigate the influence of previous active static stretch on the peak torque (PT) and rate of force development (TDF) during isokinetic concentric contractions at 60 and 180.s-1 in active individuals. Twelve active subjects with ages between 18 and 30 years participated of this study. The individuals were submitted in different days to the following tests: 1) Familiarization session to the isokinetic dynamometer; 2) Five maximal isokinetic concentric contractions for knee extensors at each angular velocity (60 and 180.s-1) to determine PT and TDF (Control), and; 3) Two active static stretching exercises for the dominant leg extensors (10 x 30 s for each exercise, with 20 s of rest). After the stretching, the isokinetic test was repeated (Post-Stretching). The conditions 2 and 3 were performed in random order. There was no significant modification after the stretch exercises on the PT, angle and time at which the PT was attained, at 60 and 180º.s-1. In the same way, there was no significant modification on the TDF and angle at which the maximal TDF was attained in both angular speeds. In other way, the time to attain maximal TDF (TTDF) at 180º.s-1 was significantly lower after the stretching (Pre - 98.3 ± 27.5 ms and Post - 86.6 ± 30.2 ms). There was significant modification on the torque (60 and 180º.s-1) and time (60º.s-1) at different delta of angle variations, obtained at 60º.s-1 at Control and Post-Stretching conditions. However, there was significant reduction of time after the stretching exercises on delta of angle variations of 90-88º (Pre - 46.6 ± 6.5 ms and Post - 44.1 ± 5.1 ms), 88-85º (Pre - 65.8 ± 7.9 ms and Post - 63.3 ± 4.9 ms) and 85-80º (Pre - 93.3 ± 7.7 ms and Post - 90.0 ± 4.2 ms) at 180º.s-1. With base on these data, it is possible to conclude that PT and TDF do not modify after static stretching, irrespectively on the speed...(Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Indoor soccer is a modality of sport similar to football, which is accompanying an increasing of the number of participants. With the growth of this sport, increased as well the number of injuries, which has been requiring greater attention and care from the health professionals. AIMS: To investigate the functional balance before and after an indoor soccer game and analyze the maximum force before and after the game, in order to verify if there is a great loss of muscle strength of knee flexors and extensors during the game. METHODS: The study included seven amateur soccer players. The isokinetic evaluation was made using the Biodex 3 isokinetic dynamometer at velocities of 60°/s and 180°/s with five repetitions at each velocity for each leg. Further, the study analyzed the peak torque of each leg at each speed of the extensor muscles and flexor concentric and eccentric. RESULTS: Compared to the peak torque before and after the game, there were no significant differences. At 60°/s in the non-dominant leg, peak torque decreased after the game of the extensor concentric and eccentric. In the dominant leg there was a decrease of peak torque in eccentric flexion at 60°/s and concentric flexion to 180°/s. Comparing the peak torque between dominance, there was any significant differences in speed. However, in eccentric flexion at 60°/s before the match there was a significant difference. The peak torque of the dominant leg showed better results than the non-dominant leg. Regarding the functional balance there was no statistically significant differences between the muscles involved. CONCLUSION: From the results achieved, it is possible to conclude that the peak torque of flexor eccentric decreases depending on the length of the exercise. This muscle is stronger in the dominant leg, comparing to the non-dominant leg

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEB

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

OBJECTIVE: To compare the strength generated by the rotator muscles of the shoulder joint between the right upper limb and left upper limb among healthy individuals. METHODS: To evaluate the muscle strength of upper limbs from isometric contractions in the horizontal direction (rotation) an isometric dynamometer was used, equipped with transducers, signal conditioning, a data acquisition board, and finally, a computer. Study participants were 22 male military subjects, aged between 18 and 19 years old, body mass between 57.7 and 93.0 kg (71.8 ± 9.45 kg) and height between 1.67 and 1.90 m (1.75 ± 0.06 m), healthy and without clinical diseases or any type of orthopedic injury in the muscle skeletal system. RESULTS: The internal rotation in the right upper limb (RUL) was higher than the average strength of internal rotation in the left upper limb (LUL) (p = 0.723). The external rotation strength in RUL was lower than the average strength of external rotation in the LUL (p=0.788). No statistical difference was observed by comparing the strength values of all isometric strength tests. CONCLUSION: For the sample and methodology used to assess muscle strength, there was no statistical difference between the strength generated by the muscles of the rotator cuff of the right and left upper limbs. Experimental Study.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In experimental conditions, cutting forces were studied during turning of green alumina billets, including their correlation with surface aspects of the workpiece. The correlation between cutting power and the removal rate are important parameters for defining the design of ceramic products, since inadequate parameters can produce excessive surface damage to the workpiece. This study examined the forces obtained during turning of alumina workpieces with 99.8% purity in their green state, by means of a three-point dynamometer, evaluating the cutting, feed and depth forces, using a cermet tool under constant machining conditions. Variables were compared with the forces, including surface finish, tool wear and temperature during machining. In the study, it was found that the depth of cut had no significant effect on the surface quality, and the cutting speed and feed influencing the finish. However, preliminary tests for selecting the cutting conditions showed that unsuitables cutting speeds and feeds generate severe damage to the workpiece surface. The best condition was 1.00 mm depth of cut, and the forces increasedfor with each pass performed, with the feed force the variable with greatest increases in relation to the cutting and depth forces, and wear of the cutting tool directly influenced the surface finish, generated by the highly abrasive nature of the alumina particles of the green compact. It is emphasized that the alumina in its green state showed high abrasive effect on the cutting tool during the turning process and the surface finishing of the green workpiece had a direct influence on the sintered workpiece.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aims of this study were to evaluate aspects of balance, ankle muscle strength and spatiotemporal gait parameters in individuals with diabetic peripheral neuropathy (DPN) and verify whether deficits in spatiotemporal gait parameters were associated with ankle muscle strength and balance performance. Thirty individuals with DPN and 30 control individuals have participated. Spatiotemporal gait parameters were evaluated by measuring the time to walk a set distance during self-selected and maximal walking speeds. Functional mobility and balance performance were assessed using the Functional Reach and the Time Up and Go tests. Ankle isometric muscle strength was assessed with a handheld digital dynamometer. Analyses of variance were employed to verify possible differences between groups and conditions. Multiple linear regression analysis was employed to uncover possible predictors of gait deficits. Gait spatiotemporal, functional mobility, balance performance and ankle muscle strength were affected in individuals with DPN. The Time Up and Go test performance and ankle muscle isometric strength were associated to spatiotemporal gait changes, especially during maximal walking speed condition. Functional mobility and balance performance are damaged in DPN and balance performance and ankle muscle strength can be used to predict spatiotemporal gait parameters in individuals with DPN.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

An experimental study was undertaken in arder to find out lhe behavior of the required force to yield dislodgement of circumierential clasps of removable partial dentures ou two groups of samples. 1 with retentive terminais engaging and acting ou enamel 2 with retentive terminais engaging on enamel and acting on composite resm With this aim a device was designed based on a sewing machine (brand name Elgin) that could repeatedly simulate lhe introduction-removal movement of circunferencial clasps ou the samples. ln addiction the device had a platform to sustain the samples and permit measurements, a cycle counter and a dynamometer. The samples were constructed by inclusion in dental stone of extracted natural molar teeth whose retentive areas were ou natural enamel or composite resin addictions.The clasps were fabricated from wax ups of resin and wax and were cast with chromium cobalt alloy. The composite resin used was one of the last generation, monomodal type, photopolymerized and binded to the enamel by the acid etching technique. Tests were carried out in aqueous enviroment. Is was established a maximum of 5.000 cycles for each of the samples. Observatins were made from 100 to 100 cycles until 2.000 and from 200 to 200 cycles to 5.000. Results showed that variations in the amount of the required force for dislodgement of the clasps from the samples during the test periods had no significancy eather to those with retentive areas on the enamel or to those with retentive fabricated with addictions of composite resin