Efeito da linhagem e do nível de lisina da dieta sobre a qualidade da carne do peito de frangos de corte

O experimento foi conduzido com o objetivo de avaliar o efeito da linhagem e do nível de lisina da dieta sobre o rendimento e a qualidade da carne de peito de frangos de corte. Foram utilizados 2250 pintos não sexados, de três linhagens comerciais, identificadas como A, B e C, distribuídos em delineamento inteiramente casualizado em esquema fatorial 3x3 (linhagens e níveis de lisina), com cinco repetições de 50 aves. As aves receberam ração à vontade, à base de milho e farelo de soja, suplementadas com 1,18; 1,24 e 1,30% de lisina nas rações pré-iniciais (1 a 7 dias); 1,10; 1,16 e 1,22% nas rações iniciais (7 a 21 dias); 1,0; 1,06 e 1,12% nas rações de crescimento (21 a 35 dias) e 0,85; 0,91 e 0,97% nas rações de terminação (35 a 42 dias). Foram avaliadas as características de rendimento de peito e carne de peito e as medidas de espessura, largura, comprimento, pH, perda de peso por cozimento e força de cisalhamento da carne de peito. Para o rendimento de peito não foram observadas diferenças significativas, enquanto para rendimento de carne de peito houve efeito significativo da linhagem, em que a linhagem A apresentou o maior rendimento e a linhagem B, o menor. Para as medidas físicas da carne do peito, foram encontradas diferenças significativas entre as linhagens para comprimento de peito, com a linhagem C apresentando o maior resultado. O pH da carne diferiu significativamente para linhagens e níveis de lisina. As linhagens tiveram efeito sobre o rendimento, comprimento e pH da carne de peito, em que a linhagem A apresentou maiores valores para rendimento e pH e a linhagem C para comprimento.

Efeito dos Níveis de Cantaxantina na Dieta Sobre o Desempenho e Qualidade dos Ovos de Poedeiras Comerciais

O experimento teve como objetivo estudar os efeitos de níveis de cantaxantina sobre o desempenho e a coloração das gemas dos ovos de galinhas poedeiras. Foram utilizadas 384 galinhas da linhagem Hisex Brown, em um delineamento em blocos ao acaso, contendo seis tratamentos (0, 12, 24, 36, 48 e 60 ppm de cantaxantina), com oito repetições de oito aves por parcela. O período experimental foi de 56 dias. A coleta de ovos foi realizada diariamente e a análise de coloração dos ovos foi efetuada com o abanico colorimétrico da Roche. Durante os 14 dias do período inicial do experimento, a melhor coloração das gemas foi obtida com a adição de 60 ppm de cantaxantina, atingindo-se a cor plateau de 14,3 do leque colorimétrico Roche aos 5,43 dias de inclusão do pigmentante. Considerando-se o período experimental total, os níveis de cantaxantina utilizados melhoraram de forma quadrática a coloração das gemas, sem influenciar os parâmetros produtivos e demais características de qualidade dos ovos de poedeiras comerciais.

Alterações Morfólogicas de Codornas Poedeiras Submetidas a Muda Forçada

Objetivou-se avaliar as alterações físicas, produção de ovos e mortalidade de codornas poedeiras submetidas a muda forçada, durante um período de jejum. Utilizou-se um delineamento inteiramente ao acaso, com quatro tratamentos (0, 1, 2, e 3) dias de jejum, com três repetições de 36 aves por parcela. No início e ao final do período de jejum 2 aves por parcela foram abatidas, pesadas individualmente e sacrificadas para retirada e avaliação do ovário, oviduto, e fígado. Os resultados mostraram que no período de jejum de três dias houve uma redução de 25,64% no peso vivo, a produção de ovos caiu a 2,81% e a mortalidade foi de 4,60%.

Alterações Morfológicas e Desempenho de Cordornas Poedeiras Tratadas com Diferentes Programas de Alimentação no Período de Repouso, da Muda Forçada

O experimento objetivou avaliar as alterações físicas, produção de ovos e mortalidade de codornas poedeiras alimentadas por diferentes períodos com milho moído após muda forçada. Utilizou-se um delineamento inteiramente ao acaso, com três tratamentos (0, 4 e 7) dias de alimentação com milho moído e quatro repetições de 30 aves por parcela para análise do peso vivo e mortalidade e duas aves por parcela para análise das características físicas. Os resultados mostraram involução do aparelho reprodutivo até o quarto dia após muda forçada. Após sete dias, as aves alimentadas com ração de produção atingiram o peso que possuíam antes da muda forçada, e aos onze dias, as aves alimentadas com milho moído por sete dias não haviam ainda recuperado o peso de aparelho reprodutivo existente antes da muda forçada.

Alimentação de Codornas com Milho Moído e Ração de Postura no Período Pós-jejum Durante a Muda Forçada e Seus Efeitos Sobre o Desempenho

O experimento foi realizado com o objetivo de avaliar o desempenho de codornas poedeiras alimentadas por diferentes períodos com milho moído ou ração de postura durante sete dias após três dias de jejum, método de muda utilizado. Após esse período, as aves foram alimentadas com ração de postura durante as 20 semanas do período experimental. Utilizou-se um delineamento inteiramente ao acaso com três tratamentos (ração de postura por sete dias, ração de postura por três dias e milho moído por quatro dias e milho moído por sete dias), e quatro repetições de 24 aves por parcela. Os resultados mostraram que aves alimentadas apenas com ração de postura nos sete primeiros dias após o jejum apresentaram maior produção de ovos nas seis primeiras semanas do período de produção pós-muda. Porém, não foi constatado efeito de tratamento sobre a produção de ovos, peso dos ovos, consumo de ração e conversão alimentar durante as 20 semanas do período experimental.

Stress Analysis in Platform-Switching Implants: A 3-Dimensional Finite Element Study

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and pen-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the Solid Works 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0 degrees), oblique (45 degrees), and lateral (90) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the pen-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

Influence of Microgap Location and Configuration on Radiographic Bone Loss in Nonsubmerged Implants: An Experimental Study in Dogs

Purpose: The implant-abutment connection (microgap) influences the pen-implant bone morphology. However, it is unclear if different microgap configurations additionally modify bone reactions. This preliminary study aimed to radiographically monitor pen-implant bone levels in two different microgap configurations during 3 months of nonsubmerged healing. Materials and Methods: Six dogs received two implants with internal Morse taper connection (INT group) on one side of the mandible and two implants with external-hex connection (EXT group) on the other side. One implant on each side was positioned at bone level (equicrestal); the second implant was inserted 1.5 mm below the bone crest (subcrestal). Healing abutments were attached directly after implant insertion, and the implants were maintained for 3 months without prosthetic loading. At implant placement and 1, 2, and 3 months, standardized radiographs were taken to monitor pen-implant bone levels. Results: All implants osseointegrated. A total bone loss of 0.48 +/- 0.66 mm was measured in the equicrestal INT group, 0.69 +/- 0.43 mm in the equicrestal EXT group, 0.79 +/- 0.93 mm in the subcrestal INT group, and 1.56 +/- 0.53 mm in the subcrestal EXT group (P>.05, paired t tests). Within the four groups, bone loss over time became significantly greater in the EXT groups than in the INT groups. The greatest bone loss was noted in the subcrestal EXT group. Conclusion: Within the limits of this animal study, it seems that even without prosthetic loading, different microgap configurations exhibit different patterns of bone loss during nonsubmerged healing. Subcrestal positioning of an external butt joint microgap may lead to faster radiographic bone loss. Int J Prosthodont 2011;24:445-452.

Influence of Microgap Location and Configuration on Peri-implant Bone Morphology in Nonsubmerged Implants: An Experimental Study in Dogs

Purpose: It is unknown whether different micro gap configurations can cause different pen-implant bone reactions. Therefore, this study sought to compare the peri-implant bone morphologies of two implant systems with different implant-abutment connections. Materials and Methods: Three months after mandibular tooth extractions in six mongrel dogs, two oxidized screw implants with an external-hex connection were inserted (hexed group) on one side, whereas on the contralateral side two grit-blasted screw implants with an internal Morse-taper connection (Morse group) were placed. on each side, one implant was inserted level with the bone (equicrestal) and the second implant was inserted 1.5 mm below the bony crest (subcrestal). Healing abutments were inserted immediately after implant placement. Three months later, the peri-implant bone levels, the first bone-to-implant contact points, and the width and steepness of the peri-implant bone defects were evaluated histometrically. Results: All 24 implants osseointegrated clinically and histologically. No statistically significant differences between the hexed group and Morse group were detected for either the vertical position for peri-implant bone levels (Morse equicrestal -0.16 mm, hexed equicrestal -0.22 mm, Morse subcrestal 1.50 mm, hexed subcrestal 0.94 mm) or for the first bone-to-implant contact points (Morse equicrestal -2.08 mm, hexed equicrestal -0.98 mm, Morse subcrestal -1.26 mm, hexed subcrestal -0.76 mm). For the parameters width (Morse equicrestal -0.15 mm, hexed equicrestal -0.59 mm, Morse subcrestal 0.28 mm, hexed subcrestal -0.70 mm) and steepness (Morse equicrestal 25.27 degree, hexed equicrestal 57.21 degree, Morse subcrestal 15.35 degree, hexed subcrestal 37.97 degree) of the pen-implant defect, highly significant differences were noted between the Morse group and the hexed group. Conclusion: Within the limits of this experiment, it can be concluded that different microgap configurations influence the size and shape of the peri-implant bone defect in nonsubmerged implants placed both at the crest and subcrestally. INT J ORAL MAXILLOFAC IMPLANTS 2010;25:540-547

Palatal lymphangioma: A case report

Lymphangioma is a rare, congenital benign tumor involving vascular malformation, with a great potential for recurrence. It appears during the early years of life and therefore is highly common among children. We report here a five-year-old patient with a simple lymphangioma. The mother of the child reported she had noted the lesion in the palate after an injury in the area with a pen. The recommended treatment was surgical excision since this was a small and well-delimited lesion. Periodic clinical controls for 18 months showed that the mucosa presented normal characteristics, with no signs of recurrence.

Comparison of visual inspection, radiographic examination, laser fluorescence and their combinations on treatment decisions for occlusal surfaces

Purpose: To compare visual inspection (VI), radiographic examination (RX) and the laser fluorescence device DIAGNOdent (L), as well as their combinations in vitro regarding treatment decisions for occlusal surfaces. Methods: 72 extracted human permanent teeth (molars and premolars) were used. Treatment decisions were recorded by three calibrated examiners, and the options available were fissure sealant and conservative restoration. For validation of treatment decisions, the teeth were sectioned and examined in a stereomicroscope. Thereafter, dental slices were scanned and the images were edited to facilitate classification of existing carious lesions. Intra and inter-examiner reproducibility for the determination of treatment plans were calculated using Cohen's kappa test (95%-CI). Sensitivity, specificity, positive and negative predictive values, and the area under the ROC curve were also calculated. Results: VI and L provided on average the greatest intra- and inter-examiner reproducibility, respectively. Although the combination of diagnostic methods may decrease both intra- and inter examiners reproducibility, combination of VI, L and RX resulted in the greatest sensitivity, being statistically superior to RX and L. There was more inter-examiner agreement for the option of restorative treatment, while the use of sealants as a treatment option yielded the lowest values. Negative predictive values were numerically inferior to positive predictive values, indicating that the examiners preferred not to restore a carious tooth than to proceed operatively in an intact tooth. The combination of the three methods studied showed the best results in determining treatment plans for occlusal surfaces, when compared to the other types of exams. on the other hand, radiographic examination and laser fluorescence were less efficient when used alone.

In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

In vivo evaluation of laser fluorescence performance using different cut-off limits for occlusal caries detection

The aim of this in vivo study was to evaluate the performance of laser fluorescence (LF) comparing different cut-off limits for occlusal caries detection. One hundred and thirty first permanent molars were selected. Visual examination and LF assessments were performed independently. The extent of caries was assessed after operative intervention. New cut-off limits were established and compared with those proposed by the manufacturer and by Lussi et al. (Eur J Oral Sci 109:14-19, 2001). Similar sensitivity and higher specificity was found at D(2) (considering as disease only dentin caries) when the LF cut-off limits proposed by Lussi et al. and the new one were compared. At the D(3) threshold (considering as disease only deep dentin caries), no statistically significant difference among the cut-off limits for sensitivity was found. However, the new cut-off limits showed higher specificity. The LF device provided good ability to detect dentin caries lesions. Furthermore, the new cut-off limits and the values proposed by Lussi et al. could be suggested for the in vivo detection of occlusal caries.

The performance of conventional and fluorescence-based methods for occlusal caries detection An in vivo study with histologic validation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Influence of Pit and Fissure Sealants on Infrared Fluorescence Measurements

The aim of this in vitro study was to evaluate the influence of pit and fissure sealants on fluorescence readings using lasers. We selected 166 permanent molars and randomly divided them into 4 groups which were each treated with a different sealant (a commercially available clear sealant, 2 opaque sealants and an experimental nanofilled clear sealant). The teeth were independently measured twice by 2 experienced dentists using conventional laser fluorescence (LF) and a laser fluorescence pen device (LFpen), before and after sealing, and again after thermocycling to simulate the thermal stressing between the tooth and the dental materials. Friedman test showed no statistically significant changes using LF and LFpen for the commercial clear sealant group, although values tended to increase after sealing. However, the values increased significantly after thermocycling. There was a statistically significant decrease in fluorescence after application of opaque sealants. After application of the experimental nanofilled clear sealant, LF values increased only after thermocycling, whereas the LFpen values increased after sealing and after thermocycling as well. The intraclass correlation coefficient ranged from 0.87 to 0.96 for interexaminer and 0.82 to 0.94 for intraexaminer reproducibility. It was shown that pit and fissure sealants influence LF and LFpen readings, with the values increasing or decreasing according to the material used. In conclusion, both laser fluorescence devices could be useful as an adjunct to detect occlusal caries under unfilled clear sealants. Nevertheless, surfaces sealed with clear nanofilled material could be assessed using only the LF device. Copyright (C) 2008 S. Karger AG, Basel.

In vitro comparison of laser fluorescence performance with visual examination for detection of occlusal caries in permanent and primary molars

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)