Virulence factors in Escherichia coli strains isolated from pigs in the Ribeirao Preto region, State of Sao Paulo, Brazil.

Three-hundred faecal swabs were obtained from pigs with diarrhoea in farms located in different areas of the Ribeirao Preto region in the State of Sao Paulo. One-hundred Escherichia coli strains were isolated and tested for production of thermolabile (TL) and thermostable (STRa and STb) enterotoxins, and for the presence of colonization factors F4, F5 and F6. The strains were also tested for sensitivity to 14 antibiotics and chemotherapeutic agents. Twenty-four Escherichia coli strains produced enterotoxin STb, 5 produced LT and 3 produced STa. In the mannose-resistant haemagglutination reaction, one strain reacted positively with sheep, chicken, horse and human red blood cells and another reacted positively with guinea pig, sheep, chicken, horse and human red cells. However, both strains were negative for colonization factors F4, F5 and F6 when submitted to the slide agglutination test. All Escherichia coli strains were resistant to at least one antibiotic, the highest percentages being obtained for resistance to penicillin, tetracycline and cephalotin. In addition to the importance of the virulence factors normally encountered in enterotoxigenic Escherichia coli strains from pigs, the present results show the possible existence of new colonization factors other than F4, F5 and F6 participating in E. coli-induced pigs colibacillosis in the Ribeirao Preto region.

Adenocarcinoma in females detected in serous effusions: Cytomorphologic aspects and immunocytochemical reactivity to cytokeratins 7 and 20

OBJECTIVE: To investigate the usefulness of assessing the immunoreactivity of cytokeratins 7 (CK7) and 20 (CK20) as well as several cytomorphologic parameters in effusions with metastatic adenocarcinomas in the search for the primary site of the tumor. STUDY DESIGN: From the files of the Pathology Department, A. C. Camargo Hospital, we studied cytologic smears from 73 metastatic adenocarcinomas originally from the breast, 63 from the ovary, 40 from the lung and 32 from the stomach, looking for morphologic parameters that could have discriminant potential in suggesting the primary site in a routine situation, including intranuclear inclusions, prominent nucleoli, mitosis, signet-ring cells, psammoma bodies, nuclear crease, binucleation and multinucleation, papillary features, acinar profile (including ball cells) and single cells. Immunoreactions were performed with monoclonal antibodies to CK7 (OV-TL 12/30 and CK20 (Ks 20.8) and included morphologic analysis. Both analyses were studied in a blind fashion regarding the primary site of the tumors. RESULTS: Positivity ratios for breast, ovary, stomach and lung cases were 67.6%, 63.5%, 29.7% and 45.5%, respectively, for CK7 and 17.2%, 15.8%, 13.5% and 32.2%, respectively, for CK20. Discriminant analysis of morphologic and immunocytochemical parameters had an error rate of 42.9% in recognizing the primary site and a Wilk's lambda of .7290. CONCLUSION: The more efficient parameter with discriminant function was the papillary appearance showed by CK7, which should be used in further studies with a similar scope. The set of parameters used in this study were insufficient to discriminate the primary site of female adenocarcinomas in effusions with significant accuracy.

Study of KCl + x% in and KCl + y% TlCl thin films

The present work reports the study of KCl thin films doped with In+ or Tl+. Both systems show optical absorption bands similar to single crystals. As the impurity concentration increases, so does the absorption as also the half band width, unlike in KCl: Cu+ films. Further experimental techniques such as X-ray diffraction, scanning electron micrographs and energy dispersive X-ray observations were used and comparative analysis with KCl : Cu+ films reveals new conditions for better crystallinity of the samples.

Tratamento da leishmaniose cutanea difusa (LCD) com a associacao antimoniato-N-metilglucamina (Glucantime®) e sulfato de paramomicina (Gabbrox®)

Diffuse cutaneous leishmaniasis (DCL) is a rare form of tegumentary leishmaniasis (TL) and 350 cases have been reported world wide. Presently in Brazil, there were 31 cases reported corresponding to 8.9% of the world cases. The state of Maranhao contributed with ten cases (32.3%) of national reports. Recently the authors had opportunity to follow two new cases of DCL, both from the countryside of that state totaling 12 cases. The parasite Leishmania L. amazonensis was incriminated in the disease, confirming the available data as being the unique species to produce DCL in this state. The therapy associating meglumine anthimoniate with paramomicine sulphate (Gabbrox®) during 90 days, showed good tolerance and favorable response, being another option for fills form of DCL that constituted a challenge to science so far.

Experimental analysis of heat transfer in packed beds with air flow

Heat-transfer studies were carried out in a packed bed of glass beads, cooled by the wall, through which air percolated. Tube-to-particle diameter ratios (D/dp) ranged from 1.8 to 55, while the air mass flux ranged from 0.204 to 2.422 kg/m2·s. The outlet bed temperature (TL) was measured by a brass ring-shaped sensor and by aligned thermocouples. The resulting radial temperature profiles differed statistically. Angular temperature fluctuations were observed through measurements made at 72 angular positions. These fluctuations do not follow a normal distribution around the mean for low ratios D/dp. The presence of a restraining screen, as well as the increasing distance between the temperature measuring device and the bed surface, distorts TL. The radial temperature profile at the bed entrance (T0) was measured by a ring-shaped sensor, and T 0 showed to be a function of the radial position, the particle diameter, and the fluid flow rate.

The no-central chi-square chart with two-stage samplings

Throughout this article, it is assumed that the no-central chi-square chart with two stage samplings (TSS Chisquare chart) is employed to monitor a process where the observations from the quality characteristic of interest X are independent and identically normally distributed with mean μ and variance σ2. The process is considered to start with the mean and the variance on target (μ = μ0; σ2 = σ0 2), but at some random time in the future an assignable cause shifts the mean from μ0 to μ1 = μ0 ± δσ0, δ >0 and/or increases the variance from σ0 2 to σ1 2 = γ2σ0 2, γ > 1. Before the assignable cause occurrence, the process is considered to be in a state of statistical control (defined by the in-control state). Similar to the Shewhart charts, samples of size n 0+ 1 are taken from the process at regular time intervals. The samplings are performed in two stages. At the first stage, the first item of the i-th sample is inspected. If its X value, say Xil, is close to the target value (|Xil-μ0|< w0σ 0, w0>0), then the sampling is interrupted. Otherwise, at the second stage, the remaining n0 items are inspected and the following statistic is computed. Wt = Σj=2n 0+1(Xij - μ0 + ξiσ 0)2 i = 1,2 Let d be a positive constant then ξ, =d if Xil > 0 ; otherwise ξi =-d. A signal is given at sample i if |Xil-μ0| > w0σ 0 and W1 > knia:tl, where kChi is the factor used in determining the upper control limit for the non-central chi-square chart. If devices such as go and no-go gauges can be considered, then measurements are not required except when the sampling goes to the second stage. Let P be the probability of deciding that the process is in control and P 1, i=1,2, be the probability of deciding that the process is in control at stage / of the sampling procedure. Thus P = P1 + P 2 - P1P2, P1 = Pr[μ0 - w0σ0 ≤ X ≤ μ0+ w 0σ0] P2=Pr[W ≤ kChi σ0 2], (3) During the in-control period, W / σ0 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ0 = n0d2, i.e. W / σ0 2 - xn0 22 (λ0) During the out-of-control period, W / σ1 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ1 = n0(δ + ξ)2 / γ2 The effectiveness of a control chart in detecting a process change can be measured by the average run length (ARL), which is the speed with which a control chart detects process shifts. The ARL for the proposed chart is easily determined because in this case, the number of samples before a signal is a geometrically distributed random variable with parameter 1-P, that is, ARL = I /(1-P). It is shown that the performance of the proposed chart is better than the joint X̄ and R charts, Furthermore, if the TSS Chi-square chart is used for monitoring diameters, volumes, weights, etc., then appropriate devices, such as go-no-go gauges can be used to decide if the sampling should go to the second stage or not. When the process is stable, and the joint X̄ and R charts are in use, the monitoring becomes monotonous because rarely an X̄ or R value fall outside the control limits. The natural consequence is the user to pay less and less attention to the steps required to obtain the X̄ and R value. In some cases, this lack of attention can result in serious mistakes. The TSS Chi-square chart has the advantage that most of the samplings are interrupted, consequently, most of the time the user will be working with attributes. Our experience shows that the inspection of one item by attribute is much less monotonous than measuring four or five items at each sampling.

Schooling behavior of Mugil curema (Perciformes: Mugilidae) in an estuary in southeastern Brazil

Schools of mullets, Mugilidae, are abundant in estuaries and shallow marine waters. We report on the schooling behavior of juvenile white mullet, Mugil curema, in the estuary of the Canto da Paciência stream, in Ubatuba, southeastern Brazil. Schools of small fish (15 to 35 mm TL) were composed of a larger number of individuals (up to a hundred individuals), and were found feeding mainly in shallow nearshore waters, whereas schools of larger fish (40 to 100 mm TL) were observed only in deeper waters. Three patterns of swimming were observed for the schools: stationary feeding, slow movement while searching for food, and rapid displacement. The variations observed in school structure and behavior seem to be related to the balance between predation risk and increasing food intake. Copyright © 2007 Sociedade Brasileira de Ictiologia.

Sexual development and reproductive cycle of the Eyespot skate Atlantoraja cyclophora (Regan, 1903) (Chondrichthyes: Rajidae: Arhynchobatinae), in southeastern Brazil

Specimens o/Atlantoraja cyclophora were collected monthly from commercial fishing landings at Guarujá, São Paulo State, Brazil, from March 2005 to April 2006 at depths between 10 and 146 m. Males ranged from 13.3 to 58.5 cm TL (n = 396). Both the smallest mature male and the largest immature male were 47.0 cm long. Males' size-at-50% maturity was calculated to be 46.3 cm. Females ranged from 11.5 to 68.0 cm (n = 401). The smallest mature and the largest immature female were 51.6 and 53.0 cm long respectively. For the females, size-at-50% maturity was calculated to be 53.2 cm. In the males the hepatosomatic andgonadosomatic indices varied between 0.48 (August) and 3.54 (November) and between 0.15 (November) and 1.45 (June) respectively, with no significant variation for the fourteen-month period. In the females the hepatosomatic and gonadosomatic indices varied from 1.55 and 6.30 3.54 (both for April 2006) and from 0.08 (December) to 4.41 (October) respectively, with no significant difference among months. Egg-bearing females were found in all months with proportions varying from 0.03 (March) to 0.67 (April). Both males and females undergo an annual cycle, with slight seasonal variations in reproductive activity and a peak in the proportion of egg bearing females between April and July.

Inversor CS Boost monofásico em aplicações com fontes renováveis

This paper presents a new methodology for the operation and control of a single-phase current-source (CS) Boost Inverter, considering that the conventional current-source inverter (CSI) has a right-half-plane (RHP) zero in its control-to-output transfer function, and this RHP zero causes the known non-minimum-phase effects. In this context, a special design with low boost inductance and a multi-loop control is developed in order to assure stable and very fast dynamics. Furthermore, the Inverter presents output voltage with very low total harmonic distortion (THD), reduced components and high power density. Therefore, this paper presents the inverter operation, the proposed control technique, and main simulation and experimental results in order to demonstrate the feasibility of the proposal. © 2010 IEEE.

The use of current transformers for noise detection due to sparking in insulators strings in high voltage transmission lines

In a general way, in an electric power utility the current transformers (CT) are used to measurement and protection of transmission lines (TL) 1 The Power Line Carriers systems (PLC) are used for communication between electrical substations and transmission line protection. However, with the increasing use of optical fiber to communication (due mainly to its high data transmission rate and low signal-noise relation) this application loses potentiality. Therefore, other functions must be defined to equipments that are still in using, one of them is detecting faults (short-circuits) and transmission lines insulator strings damages 2. The purpose of this paper is to verify the possibility of using the path to the ground offered by the CTs instead of capacitive couplings / capacitive potential transformers to detect damaged insulators, since the current transformers are always present in all transmission lines (TL's) bays. To this a comparison between this new proposal and the PLC previous proposed system 2 is shown, evaluating the economical and technical points of view. ©2010 IEEE.

HW/SW for an intelligent transducer network based on IEEE 1451 standard

This work describes a hardware/software co-design system development, named IEEE 1451 platform, to be used in process automation. This platform intends to make easier the implementation of IEEE standards 1451.0, 1451.1, 1451.2 and 1451.5. The hardware was built using NIOS II processor resources on Alteras Cyclone II FPGA. The software was done using Java technology and C/C++ for the processors programming. This HW/SW system implements the IEEE 1451 based on a control module and supervisory software for industrial automation. © 2011 Elsevier B.V.

Sex ratio, growth and recruitment of the pelagic shrimp Acetes americanus on the southeastern coast of Brazil

We evaluated the population dynamics of Acetes americanus Ortmann, 1893 focusing on sex ratio, individual growth, longevity, and the juvenile recruitment period. Samples were collected monthly from January 2006 to June 2007 in the bay of Ubatuba, Brazil. Specimen growth was identified for each gender, and the chosen cohorts were fitted in a von Bertalanffy Growth Model (VBGM); longevity was estimated by the von Bertalanffy inverse equation, considering 99% of the asymptotic length. A total of 6881 individuals (2343 males and 4538 females) were captured. On average the body size (total length) was greater in females (14.64 ± 3.34 mm) than in males (12.27 ± 1.86 mm). The mean growth curves (obtained by grouping the cohorts for each sex), provided estimates of TL∞ = 19.33 mm, k = 0.02 and t0 = -0.12 days for females and TL∞ = 15.13 mm, k = 0.03 and to = -0.07 days for males, where TL∞ is the asymptotic length, k is coefficient of growth and to is the theorical age when the size is equal to 0. Longevity was estimated at 0.61 years for females and 0.50 years for males. The sex ratio tended to favor females, which corroborates with others studies of sergestids. Our finding that males of A. americanus have higher values of k and therefore achieve a smaller size relative to females has been observed in other penaeids. We concluded that this differential growth pattern between the sexes is found across Dendrobranchiata. The life cycles of penaeids have an average duration of approximately 1-2 years, but our results corroborate other studies that estimate a shorter longevity for Acetes, as species of this genus are typically smaller in size. We found continuous recruitment with two main peaks observed during the study period, corroborating previous studies of Acetes. © The Crustacean Society, 2013. Published by Brill NV, Leiden.

Expression of genes related to quality of Longissimus dorsi muscle meat in Nellore (Bos indicus) and Canchim (5/8 Bos taurus×3/8 Bos indicus) cattle

This study was performed to compare CAPN1, CAPN2, CAST, TG, DGAT1 and LEP gene expressions and correlate them with meat quality traits in two genetic groups (Nellore and Canchim) in order to assess their expression profile and use their expression profile as genetic markers. We analyzed 30 young bulls (1. year old), 15 of each genetic group. Samples of the Longissimus dorsi muscle were collected for analysis of: total lipids (TL) and meat tenderness measured as Warner-Bratzler shear force (SF) and myofibrillar fragmentation (MFI) at day of slaughter and 7. days of aging. Gene expression profiles were obtained via RT-qPCR. TL and MFI showed differences between breeds, higher MFI in Canchim and higher TL in Nellore. Calpains showed no differential expression between groups, as did DGAT1, TG, and LEP. CAST was expressed more in the Nellore cattle. The only significant within-breed correlation (0.79) between gene expression and meat traits was found for DGAT1 and MFI in Canchim breed. Although the number of animals used in this study was small, the results indicate that the increased expression of CAST in Nellore may reflect tougher meat, but the lack of correlations with the meat traits indicates it is not a promising genetic marker. © 2013 Elsevier Ltd.

Perfil lipídico de mulheres submetidas a um programa de exercício físico e à suplementação de suco de laranja

Pós-graduação em Alimentos e Nutrição - FCFAR

Variações goniométricas metatarsofalângica e interfalângicas e medidas do casco do membro pélvico de equinos submetidos à tenectomia do flexor digital medial (flexor longo do halux)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)