Interfacial integrity of low-shrinkage composite restorations related to the filling technique and consistency

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphology and adhesion on blood components in root surfaces treated by a piezoelectric ultrasonic: an in vitro study

The aim of this study was to evaluate the morphology and adhesion of blood components on root surfaces instrumented with piezoelectric ultrasonic Piezon Master Surgery. Methods 10 teeth were used in this study. The teeth had their proximal divided into four areas that received different treatments: Group 1: untreated control Group 2: scaling with manual instrument; Group 3: scaling with ultrasound; Group 4: Scaling with manual instruments and ultrasound. We obtained 20 samples, 10 of which were used to analyze the morphology and the other 10 were used for analysis of adhesion of blood components. The specimens were analyzed by scanning electron microscopy. Photomicrographs were analyzed by the scores of adhesion of blood components and the index of root morphology. The results were statistically by the Kruskall-Wallis and Mann-Whitney with a significance level of 95%. Results The morphological analysis showed that the Group 1 had a surface unchanged in relation to other groups (Group 1 X Group 2 = 0.0025; Group 1 X Group 3 = 0.0003; Group 1 X Group 4 = 0.0003) and Group 2 presented a smoother surface compared to Group 1 and groups instrumented with ultrasound (Group 2 X Group 3 = 0.0025; Group 2 X Group 4 = 0.0025) there were no statistical differences between the Groups 3 and 4. analysis of adhesion of blood components showed that the Groups 2, 3 and 4 had no statistically significant differences between themselves, but more biocompatible surfaces promoted the surface untreated control (Group 1 X Group 2 = 0.02; Group 1 X Group 3 = 0.04; Group 1 X Group 4 = 0.005). Conclusion The instrumentation with piezoelectric ultrasonic promoted an irregular root surface, but did not negatively affect the adhesion of blood components.

Effect of Er:YAG laser and diamond drill on hybrid layer morphology obtained with self-etch adhesive: analysis by SEM and confocal laser scanning microscopy (CLSM)

This study aimed to evaluate the effect of Er:YAG (L) and diamond drills (DD) on: 1) the microshear bond strength (MPa); 2) the adhesive interface of two-step (TS) – Adper Scotchbond Multipurpose and one-step (OS) adhesives – Adper EasyOne, both from 3M ESPE. Material and methods: According to the preparation condition and adhesives, the samples were divided into four groups: DD_TS (control); DD_OS; L_TS and L_OS. 60 bovine incisors were randomly divided into experimental and groups: 40 for microshear bond strength (n = 10) and 20 for the adhesive interface morphology [6 to measure the thickness of the hybrid layer (HL) and length of tags (t) by CLSM (n = 3); 12 to the adhesive interface morphology by SEM (n = 3) and 2 to illustrate the effect of the instruments on dentine by SEM (n = 1)]. To conduct the microshear bond strength test, four cylinders (0.7 mm in diameter and 1 mm in height with area of adhesion of 0.38 mm) were constructed with resin composite (Filtek Z350 XT – 3M ESPE) on each dentin surface treated by either L or DD and after adhesives application. Microshear bond strength was performed in universal testing machine (EMIC 2000) with load cell of 500 kgf and a crosshead speed of 0.5 mm / min. Adhesive interface was characterized by thickness of hybrid layer (HL) and length of tags (t) in nm, with the aid of UTHSCSA ImageTool software. Results: Microshear bond strength values were: L_TS 34.10 ± 19.07, DD_TS 24.26 ± 9.35, L_OS 33.18 ± 12.46, DD_OS 21.24 ± 13.96. Two-way ANOVA resulted in statistically significant differences only for instruments (p = 0.047). Mann-Whitney identified the instruments which determined significant differences for HL thickness and tag length (t). Concerning to the adhesive types, these differences were only observed for (t). Conclusion: It can be concluded that 1) laser Er:YAG results in higher microshear bond strength values regardless of the adhesive system (TS and OS); 2) the tags did not significant affect the microshear bond strength; 3) the adhesive interface was affected by both the instruments for cavity preparation and the type of adhesive system used.

Repair of composites: Effect of laser and different surface treatments

Objectives: This study investigated the repairs of resin composite restorations after using different surface treatments.Design: Eighty four truncated cones of Filtek Z350 were prepared and thermo-cycled (20,000 cycles). Surfaces were roughened with diamond bur and etched with 37% phosphoric acid. Those cones were divided into 7 groups (N=12): 1) Prime&Bond 2.1; 2) aluminum oxide sandblasting+Prime&Bond 2.1; 3) Er:YAG laser treatment+Prime&Bond 2.1; 4) 9.6% hydrofluoric acid for 2 min-Fsilane coupling agent.; 5) silane coupling agent; 6) auto-polymerized acrylic monomer+Prime&Bond 2.1; 7) Adper Scothbond SE. Teflon device was used to fabricate inverted truncated cones of repair composite over the surface-treated. The bonded specimens were stressed to failure under tension. The data were analyzed with oneway ANOVA and Tukey tests.Results: Mean repair strengths (SD, in MPa) were, Group-2: 18.8a; Group-1: 18.7a; Group-6: 13.4ab; Group-7: 9.5bc; Group-3: 7.5bcd; Group-4: 5.2cd; Group-5: 2.6d.Conclusions: The use of diamond bur and a conventional adhesive and the use of aluminum oxide sandblasting prior to adhesive provided a simple and cost-effective solutions to composite repair. Er:YAG laser, silane alone, 9.6% hydrofluoric acid plus silane or a self-etching adhesive results in inferior composite repair strengths. (C) 2015 Elsevier Ltd. All rights reserved.

Alterations of protein expression in conditions of copper-deprivation for Paracoccidioides lutzii in the presence of extracellular matrix components

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação da expressão da molécula de adesão CD56 em plasmócitos no mieloma múltiplo através de estudo imuno-histoquímico

O papel das moléculas de adesão celular, na fisiopatologia do mieloma múltiplo (MM), tem sido alvo de vários estudos nos últimos anos. A expressão de CD56 pelos plasmócitos tumorais está associada a comportamento clínico menos agressivo da doença, e sua perda tem sido descrita na fase de leucemização plasmocitária. A determinação da expressão da molécula CD56 pelos plasmócitos tumorais pode ser obtida através de citometria em fluxo, revelando positividade em 55% a 78% dos casos. No presente estudo, objetivamos verificar a expressão da molécula CD56 por plasmócitos tumorais na medula óssea de portadores de MM, utilizando o estudo imuno-histoquímico das amostras histológicas obtidas ao diagnóstico. Analisamos as amostras de medula óssea de vinte portadores de MM, e realizamos o estudo imuno-histoquímico para determinação da expressão das cadeias leves kappa e lambda e da molécula CD56 pelos plasmócitos tumorais. A expressão da molécula CD56 foi importante em três casos, moderada em seis, discreta em quatro e negativa em sete. O estudo imuno-histoquímico mostrou-se válido para determinação da expressão de CD56 por plasmócitos tumorais em portadores de MM, fornecendo resultados semelhantes aos descritos para os obtidos por citometria em fluxo. Através do estudo imuno-histoquímico, foi possível observar variações da expressão da molécula CD56.

The Disk-Specimen Thickness Does Not Influence the Push-Out Bond Strength Results Between Fiber Post and Root Dentin

This study evaluated the effect of different thickness of disk-shaped specimens on the push-out bond strength test. Eighteen lower bovine teeth were sectioned (20mm) and prepared (15mm) with the same post system drill (Light Post (R) #1, Schaumburg, IL, Bisco, USA). The apical third of each specimen was embedded in a plastic matrix filled with an acrylic resin (Dencrilay (TM), Dencril, São Paulo, Brazil). The posts were cleaned with alcohol, silanated (ProSil (R), FGM, Joenville, SC, Brazil) and cemented with the RelyX (TM) U100 (3M ESPE, St. Paul, MN, USA). Each specimen was sectioned into three pieces of differing thicknesses (1, 2, and 4 mm). These disk-samples were allocated into 3 groups (n=18) and subjected to push-out testing. One-way ANOVA showed no influence of the specimen thickness on the results (p=0.842). No correlation was observed between thickness and push-out bond strength (Pearson Correlation, r(2)=0.0688; P=0.6209). The push-out bond strength test was not affected by the thickness of the disk-specimens.

Prevalência e caracterização de espécies de lactobacilos vaginais em mulheres em idade reprodutiva sem vulvovaginites

OBJETIVO: identificar espécies de lactobacilos isolados do conteúdo vaginal de mulheres saudáveis e assintomáticas; determinar as espécies mais prevalentes e caracterizá-las fenotipicamente. MÉTODOS: lactobacilos foram isolados em meio seletivo a partir de amostras de conteúdo vaginal de 135 mulheres, sem queixa de corrimento e com diagnóstico laboratorial negativo para infecções vaginais, acompanhadas em um ambulatório de Planejamento Familiar. Os isolados foram identificados por PCR multiplex e, quando necessário, submetidos ao sequenciamento do gene RNAr 16S. Foram também avaliados quanto à acidificação do meio de cultura, à produção de ácido láctico, de H2O2, bacteriocinas e a capacidade de adesão às células epiteliais. RESULTADOS: oitenta e três cepas de lactobacilos foram isoladas e identificadas, sendo as espécies predominantes L. crispatus (30,1%), L. jensenii (26,5%), L. gasseri (22,9%) e L. vaginalis (8,4%). Apenas 20 destes isolados não produziram H2O2 em quantidades detectáveis. Das 37 linhagens selecionadas para teste de adesão a células epiteliais, 12 apresentaram adesão entre 50 a 69%, 10 apresentaram 70% ou mais, e as restantes pouca ou nenhuma adesão. Nenhum dos isolados produziu bacteriocinas. CONCLUSÕES: as espécies de lactobacilos mais prevalentes em mulheres sem vulvovaginites, isoladas em meio de cultura seletivo e identificadas por métodos moleculares, foram L. crispatus, L. jensenii e L. gasseri. Além de mais frequentes, tais linhagens também apresentaram melhor produção de H2O2 e atingiram menores valores de pH em meio de cultura.

Obstrução intestinal congênita em cão por aderência de alça em osso púbico

Atendeu-se uma cadela, sem raça definida, com aproximadamente cinco meses de idade, apresentando anamnese com queixa de apatia e hiporexia associadas a vômitos e emagrecimento progressivo com início incerto. Ao exame físico era evidente distensão abdominal com dilatação intestinal e aumento de peristaltismo. O animal apresentava-se emaciado e subdesenvolvido, com acentuado grau de desidratação, pulso filiforme e nível de consciência reduzido. Minutos após o início do atendimento a cadela foi a óbito. À necropsia, pôde-se observar um segmento do intestino delgado atravessando o púbis e com lúmen reduzido. Tal apresentação se faz relevante por se tratar de um caso nunca antes descrito na literatura veterinária.

Relação entre perdas dentárias e queixas de mastigação, deglutição e fala em indivíduos adultos

OBJETIVO: investigar se as perdas dentárias em indivíduos adultos apresentam relação com as queixas de fala, mastigação e deglutição. MÉTODOS: participaram deste estudo 50 indivíduos adultos, trabalhadores de uma Avícola, do município de Bariri (SP), com faixa etária entre 18 e 52 anos. Os participantes selecionados foram submetidos à avaliação odontológica por um cirurgião-dentista e à entrevista fonoaudiológica, por duas fonoaudiólogas, em um consultório do município que mantém contrato de prestação de serviço com a Avícola. Para análise dos resultados, foram comparados os indivíduos com e sem perda dos elementos dentários, denominados de grupo experimental (GE) e grupo controle (GC), respectivamente, a partir da aplicação do teste Qui-Quadrado. RESULTADOS: os resultados revelaram maior ocorrência de mastigação unilateral no GE. Queixas quanto à dificuldade e dor na mastigação estiveram presentes apenas no GE, com diferença estatisticamente significante entre os grupos (p<0,05). O tempo de deglutição mostrou-se inadequado para a maioria dos indivíduos em ambos os grupos. A maioria dos indivíduos do GC mencionou utilizar algum tipo de líquido para facilitar a deglutição. Nenhum indivíduo mencionou queixas de fala. CONCLUSÃO: os achados revelaram que a ausência de elementos dentários em indivíduos adultos apresentou relação apenas entre dificuldade e dor durante a mastigação.

Atherosclerosis morphology and pathogenesis

Atherosclerosis is a very common and important disease being the most important cause of mortality in Brazil. Indeed, in 1995, 23.3% of deaths, all ages, in our country, were the consequence of atherosclerosis. This percentage grows to 26.3% for S. Paulo and 32.7% for Rio Grande do Sul. Morphologically, there are 3 main types of lesions: fatty streaks, fibrous plaques, and complicated lesions. Fatty streaks are inocuous and occur early in life. In some persons, with age, they change into fibrous plaques that may lead to stenosis. They also may become complicated by erosion, calcification, hemorrhage and thrombosis. Atherosclerosis is initiated by endothelial functional alterations responsible for increase in permeability to macromolecules, adhesion, and migration of monocytes-macrophages and lymphocytes plus recruitment of platelets and smooth-muscle medial cells. Adhesion molecules, cytokines, growth factors, and free radicals are locally synthesized, favoring proliferation of extracellular matrix and progression of the lesion. Experimental, clinical, and epidemiological evidence point to the importance of lipids, mainly cholesterol-rich low-density lipoprotein (LDL), as one of the most important molecules involved in the genesis and progression of atherosclerosis. Patients with a genetic disorder of cholesterol metabolism (familial hyperlipidemia), caused by a decrease in the availability of receptors for LDL, develop severe atherosclerosis early in life. A series of other factors, such as age, diabetes melitus, diet, hypertension, lack of exercise, elevated hemocysteinemia, immunological disorders, and coagulation instability, are related to the progression of atherosclerosis. All of them are capable of altering the endothelium or increasing the offer of LDL. All the above-mentioned factors are systemic; but atherosclerosic lesions are focal, located at preferential sites such as the emergence of colaterals, bifurcations, and curvatures of arteries, all areas in which the laminar flow is disturbed. In these areas shear stress is diminished favoring the prolongation of permanence time of lipid particles, cells, cytokines, growth factors, etc., in the vicinity of the endothelium. Moreover, the endothelium has sensors that act as transducers of mechanical forces in biological responses. Experimental data demonstrate that the number and quality of adhesion molecules, cytokines, and growth factors synthetized, as well as the local production of radicals, and pro and anticoagulation factors may change with shear stress favoring or not the local establishment and progression of atherosclerotic lesions.

Avaliação microbiológica da superfície dos implantes ortopédicos metálicos usados para fixar fraturas ósseas

In the majority of cases of bone fracture requiring surgery, orthopedic implants (screw-plate and screw) are used for osteosynthesis and the infections associated with such implants are due to the growth of microorganisms in biofilms. The objective of this study was to identify microorganisms recovered from osteosynthesis implants used to fix bone fractures, to assess the viability of the cells and the ability of staphylococci to adhere to a substrate and to determine their sensitivity/resistance to antimicrobials. After surgical removal, the metal parts of austenitic stainless steel (ASTM F138/F139 or ISO NBR 5832-1/9) were transported to the Laboratory of Clinical Microbiology, washed in buffer and subjected to ultrasonic bath at 40±2 kHz for 5 minutes. The sonicated fluid was used to seed solid culture media and cell viability was assessed under the microscope by with the aid of a fluorescent marker. The production of extracellular polysaccharide by Staphylococcus spp. was investigated by means of adhesion to a polystyrene plate. The profile of susceptibility to antimicrobials was determined by the disk diffusion assay. The most frequently isolated bacteria included coagulase-negative Staphylococcus resistant to erythromycin, clindamycin and oxacillin. Less frequent were Pseudomonas aeruginosa resistant to trimethoprim/sulfamethoxazole and ampicillin, Acinetobacter baumannii resistant to ceftazidime, Enterobacter cloacae resistant to cephalothin, cefoxitin, cefazolin, levofloxacin and ciprofloxacin, Bacillus spp. and Candida tropicalis. The observation of slides by fluorescence microscope showed clusters of living cells embedded in a transparent matrix. The test for adherence of coagulase-negative Staphylococcus to a polystyrene plate showed that these microorganisms produce extracellular polysaccharide. In conclusion, the metal parts were colonized by bacteria related to orthopedic implant infection, which were resistant to multiple antibiotics.

Efeito fotodinâmico da curcumina em micelas de cetrimida sobre cepas de candida susceptíveis e resistentes a fluconazol

Pós-graduação em Biociências e Biotecnologia Aplicadas à Farmácia - FCFAR

Susceptibilidade antifúngica, produção de biofilme e caracterização do gene ALS3 em isolados de Candida albicans e não-albicans do hospital das clínicas, UNESP, Botucatu

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de soluções irrigadoras na resistência adesiva de pinos de fibra de vidro utilizando cimento resinoso: avaliação através do teste de push-out

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)