Potencial de aproveitamento de agregados reciclados de resíduos da construção e demolição

CONAMA Resolution 307 / 02, in Article 4, states that the primary goal of those involved in the reuse process of construction and demolition waste is not the generation of such wastes, secondarily is the reduce, reuse, recycling and proper disposal of such material. The disposal problem of large volumes of waste generated coupled with the scarcity of natural resources and environmental degradation involved in the extraction process of such materials resulted in several studies, that after many analyzes proposed various forms of reuse and recycling . The NBR 15.116/04 provides requirements for the use of recycled aggregates in paving and concrete without structural function. This work aims to show the usage potential of recycled aggregates from waste generated in construction and demolition sampled Group AB Areias, Pindamonhangaba (SP) in order to meet the standards in Brazil, as well as the environmental contribution by reducing the use of raw materials extracted from nature. After stabilization and particle size analysis of the California Bearing Ratio and Proctor, obtained mixtures of recycled aggregates showed higher values submitted by the minimum standards related, with excellent potential for use in paving

Utilização da cinza de folha de cana-de-açúcar como material pozolânico em matrizes cimentantes

Pós-graduação em Engenharia Civil - FEIS

Caracterização e utilização do resíduo de cerâmica vermelha como material pozolânico em matrizes cimentantes

Pós-graduação em Engenharia Civil - FEIS

Viabilidade técnica e econômica do superadobe na construção de casas populares

The need for affordable housing and the high cost of today's building materials make necessary to look for useful and affordable technologies for these house buildings. In this context, this study aimed to evaluate the technical and economic feasibility of construction technology called Earthbag for use in public housing. Technical assessments were based on Kiffmeyer and Hunter's book (2004), academics dissertations and construction standards for the technology. The result allowed a positive evaluation towards the feasibility proposal and showing the possibility of replace the use of structural concrete blocks in public housing. The economic viability was performed an economical compared to a project Housing Project Bom Retiro 2 with one of Earthbag which have been shown considerable savings between the techniques. For the construction of masonry, build with purchased sand, 13% lower budget was found in comparison of a concrete masonry block. With the use of sand from the work site itself, there is a saving of 18%. Although earthbag has proven to be a technically and economically feasible for application in the construction of affordable housing, the shortage of technical and scientific studies and Brazilian regulations on this technology has limited its large-scale use

O bambu na arquitetura: desing de conexões estruturais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aproveitamento de resíduos de empresas moveleiras da região de São José do Rio Preto para confecção e avaliação de painéis aglomerados

Pós-graduação em Engenharia Civil - FEIS

Utilização de resíduos de concreto em concreto auto-adensável

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de ciclos térmicos na microestrutura e propriedades mecânicas da junta soldada do aço COS CIVIL 300

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Área de degradação urbana: uma questão socioeconômica e ambiental no bairro Santo Antônio, Teresina - Piauí

Pós-graduação em Geografia - IGCE

Avaliação de medidores com múltiplas tomadas de pressão na macromedição em sistemas de água

Pós-graduação em Engenharia Civil - FEIS

Estudo da viabilidade do emprego do pó de mármore para produção de concreto autoadensável e substituição parcial dos agregados por pérolas de poliestireno expandido (EPS)

Pós-graduação em Engenharia Civil - FEIS

A qualidade de placas de circuito impresso confeccionadas a partir de poliestireno reciclado

Pós-graduação em Engenharia Mecânica - FEG

Estudo comparativo entre MDF e MDP utilizados na indústria moveleira

Increasingly, the furniture market is competitive. The construction industry presents itself in growth, mainly due to the lines of existing incentives and tax credits established by the government, assisting the impulse to purchase real estate, building materials and furniture. Factors that promote and strengthen the sector's growth. With high demand from the furniture market, demand for higher quality and increasing technological advances, research is often undertaken in search of solutions for process improvement and product features, focusing on the production of materials less harmful to the environment, provision of raw press to lower cost, improve the production process and product development of cost-effective. This research focuses on the comparative study between two materials widely used in furniture manufacturing. MDF (Medium Density Fiberboard) and MDP (Medium Density Particleboard). The subject provides the focus in furniture production, presenting and comparing data collected from three companies producing panels between physical and mechanical characteristics of the materials, also presenting some of the main factors of influence on the quality of the panels, their features and applications on mobile. The study shows the high potential of using the MDP (Medium Density Particleboard) in furniture designs, as well as MDF (Medium Density Particleboard), favoring the final terms of the project , resulting in better utilization of each material , avoiding waste and increase unnecessary cost . Currently, several projects are developed in MDP and MDF furniture, where there is no relevance to their characteristics regarding their limitations. Many of these furnishings are designed without a specific study of the best use and positioning of each material, with better utilization , favoring collateral design , especially furniture designed exclusively for each environment . The lack of technical ...

Aplicação de resíduos de construção e demolição em estruturas de pavimento

The objective of this work was collect information of articles published previously and carry out a study about them, including contents and interesting stuff that bring growth regarding the construction residues utilization and demolition (RCD), that today provides many environmental impacts. The need of utilization of the RCD in Brazil and in the world earned bigger attention world speaking, therefore the industry of the civil construction is had as one of the biggest present residues output springs. For it present a point that can be applied the RCD, is discussed in that work the kinds and structures of floors, where are presented the layers and, finally, a short argument about the possible and economic feasabilities job of the residues recycled in some layers of the structure of floor

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag