Consideracoes sobre a aplicacao da geoestatistica a dados geoquimicos.

Deals with some common problems in structural analysis when calculating the experimental semi-variogram and fitting a semi-variogram model. Geochemical data were used and the following cases were studied: regular versus irregular sampling grade, presence of 'outliers' values, skew distributions due to a high variability of the data and estimation using a kriging procedure. -from English summary

Estudo da influencia do relevo nos dados de reflectancia da superficie do terreno atraves de imagens Landsat.

Presents a study of the spectral response of a specific vegetative cover under the same soil elevation angle, but in different classes of slope, through Landsat transparencies. The site located in the region of Presidente Prudente was studied through topo sheets to define the classes of slope. Densitometric readings were obtained of selected areas, representing the terrain reflectance in different relief conditions. The cluster analysis was used to classify the densitometric data according to the classes of slope. The map of classes of slope/reflectance of the terrain surface showed a high correlation, mainly for the classes A (0-10%) and B (10-20%). -from English summary

Obtencao e interpretacao de dados de Reflexao Sismica Superficial (Rasa) - exemplos e aplicacoes

Successful application of shallow seismic reflection method is related directly to the ability of the ground to transmit high-frequency seismic energy from a seismic source. The dominant frequencies of reflection data are in the range of 50 to 100 Hz and depend on the surface materials and water table. A spread of geophones send the siemsic signal to be recorded on a 12, 24 or 48 channel portable seismograph, using a single high-frequency geophone per channel. Although it is possible to find seismographs with display and processing unities, it is also possible to transfer digitalized data to a personal computer to be processed and interpreted by using specific programs. Some results of two recent field studies to specify the underground structure in the tidal flats area of Baie St. Paul (Quebec-Canada) and in glacial terrains, in the Waterloo (Ontario-Canada) region. -from English summary

Representacao grafica de dados multidimensionais com o auxilio de microcomputador

Software in BASIC (GWBASIC, version 2.0) and TURBO PASCAL (version 3.0) is presented for PC type microcomputers with the purpose of calculating the graphical method for multivariate data according to Andrews. Applying both softwares to data from the Irati Formation mesossaurides skull measures, in velocity and graphical quality, the TURBO PASCAL language performed better. -after English summary

Megaestruturacao pre-cambriana do territorio brasileiro baseada em dados geofisicos e geologicos

Crustal discontinuities may be seen as A-type collision sutures with triple junction arrays. Shear belts developed at the block borders due to oblique plate convergence. A consistent litho-structural zoning may be observed along the border zones of the blocks: the known high-grade terrains are exposed along the upper block border and pass to distal granite-greenstone terrains; in the lower block, granite-greenstone terrains form the older basement, and supracrustals occur as a metavolcano-sedimentary belt near or adjacent to the suture. This regional litho-structural framework may be related to diachronous collisions of sialic masses which lead to their amalgamation into an extensive continental mass. -from English summary

Rede neural não supervisionada baseada em transformada Karhunen-Loève para processamento, compressão e reconhecimento de imagens

The merit of the Karhunen-Loève transform is well known. Since its basis is the eigenvector set of the covariance matrix, a statistical, not functional, representation of the variance in pattern ensembles is generated. By using the Karhunen-Loève transform coefficients as a natural feature representation of a character image, the eigenvector set can be regarded as an feature extractor for a classifier.

Degradabilidade ruminal da matéria seca e da fração protéica da silagem de milho, do farelo de soja e do sorgo grão, em bovinos da raça nelore. Comparação com os dados obtidos pelo CNCPS

The nylon bag in situ degradation thecnique was employed to compare the data of the CNCPS to the ruminal degradability of the dry matter and crude protein in corn silage, soybean meal and sorghum grain, in four rumen fistulated Nellore steers, averaging 36 months of age and 520 kg of liveweight. A randomized complete block experimental design was used, where animals constituted the blocks. Two levels of concentrate, 18 and 39 %, were used in the diets. The forage used in the diets was corn silage and the concentrate ingredients were: soybean meal, cottonseed meal, corn grain and sorghum grain. There was a reduction in the potentially by degradable fraction (B) of the dry matter(DM) of the corn silage and sorghum grain with an increase in the concentrate level of the diet; however, the degradation rate(c) of the silage was similar for the two diets and the sorghum grain showed an increase of 28.4 %. The B fraction of the DM from the soybean meal was not affected by the diet, but its rate (c) was reduced by 18.1 %. The same effect was observed for the rate(c) of crude protein(CP) of the soybean meal, with a reduction of 38.1 %. The values for the effective degradability of the two fractions were not affected by the diet when the lag time was not considered. When lag time was considered, the degradability values of the studied feeds were superior in both fractions.

Revendo os códigos hamming e CRC para tratar com erros na transmissão de dados

This article has the purpose to review the main codes used to detect and correct errors in data communication specifically in the computer's network. The Hamming's code and the Ciclic Redundancy Code (CRC) are presented as the focus of this article as well as CRC hardware implementation. Each code is reviewed in details in order to fill the gaps in the literature and to make it accessible to the computer science and engineering students as well as to anyone who may be interested in learning the technique to treat error in data communication.

Força de compressão e umidade no perfil de dissolução da hidroclorotiazida

The aim of this work was to evaluate the influence of compression force and humidity in the dissolution profile of tablets formulation. As hidroclorotyiazide presents real problems of bioavailability, it was incorporate as standard drug in a formulation of tablets to study the mechanical resistance, time of disintegration and dissolution profile in function of humidity and compression force. The time of disintegration was not affected by the compression force, but it was influenced by humidity. The dissolution profile was altered by the compression force and for the humidity as well. Both factors can alter the bioavailability of drugs dispensed in the form of tablets.

Resistência à compressão do concreto autoadensável: Influência da atividade pozolânica do calcário e do basalto

This research studies the influence of the pozzolanic activity of the calcareous and basalt in the resistence behavior of the compressive strength of high performance self-compacting concrete (HPSCC). The selected aditives are the calcareous filler and basalt filler, for they are industrial residues helping that way the sustainable development. The paste of this concrete type is constituted of cement, silica fume, calcareous filler or basalt filler, water and superplasticizer additive. In this research the relationships water/cement are fixed in 0,40 kg/kg, silica fume/cement of 0,10 kg/kg and the relationships filler/cement and superplasticizer/cement are determined through of Marsh́s cone and mini-slump tests. The granular skeleton is gotten from a composition between quartzous sand and brita of basalt that presents the lesser index of emptinesses. The results show that the HPSCC with the addition of calcareous filler has greater compressive strength than what the HPSCC with addition of basalt filler in the ages of 7, 28 and 63 days. It is explained by the fact that the calcareous filler presents greater index of pozzolanic activity than the basalt filler. Besides that the relation water/fine for the HPSCC with calcareous filler is 0,27 l/kg whereas the HPSCC with basalt filler is of 0,29 l/kg.

Segmentação de dados de perfilamento a laser em áreas urbanas utilizando uma abordagem Bayesiana

In this paper is presented a region-based methodology for Digital Elevation Model segmentation obtained from laser scanning data. The methodology is based on two sequential techniques, i.e., a recursive splitting technique using the quad tree structure followed by a region merging technique using the Markov Random Field model. The recursive splitting technique starts splitting the Digital Elevation Model into homogeneous regions. However, due to slight height differences in the Digital Elevation Model, region fragmentation can be relatively high. In order to minimize the fragmentation, a region merging technique based on the Markov Random Field model is applied to the previously segmented data. The resulting regions are firstly structured by using the so-called Region Adjacency Graph. Each node of the Region Adjacency Graph represents a region of the Digital Elevation Model segmented and two nodes have connectivity between them if corresponding regions share a common boundary. Next it is assumed that the random variable related to each node, follows the Markov Random Field model. This hypothesis allows the derivation of the posteriori probability distribution function whose solution is obtained by the Maximum a Posteriori estimation. Regions presenting high probability of similarity are merged. Experiments carried out with laser scanning data showed that the methodology allows to separate the objects in the Digital Elevation Model with a low amount of fragmentation.

Circulação recente de sedimentos costeiros nas praias de santos durante eventos de tempestades: Dados para a gestão de impactos físicos costeiros

The beachs of Santos are situated in Santos Bay, central portion of paulista coast, in São Paulo state. This beachs are frequently affected by cold fronts with winds and currents from the South. These fronts are responsible for the removal and transport of sediments (sand) in Santos beaches. In order to quantify this sedimentation the channels of Santos were analysed, due to their function as box colectors of sediments during storm events. The channels are filled by sands, which volume in channels 1 to 6 was estimated, by using the length, width and height of sand sedimented in the channels, in the event of 22-27 april 2005. The chanels 2, 3 and 1 presented the larger volumes of sands, confirming that the central and SW portion of the beaches of Santos present higher levels of sedimentation or re-sedimentation. That is due to the transport by ocean waves and currents and currents from the Channel of the Port of Santos. This central portion suffer invasion of marine water over street and buildings, caracterizated of geological rise area.

Modelagem numérica da superfície na geração da planialtimetra segundo dados de quatro equipamentos topogríficos

The aim of this present work was to compare planialtimetric charts obtained from different risings using two different theodolite types, a total station, and a precision level, used as control. Using a total station, an area was marked with clear variations of relief, following a grid, with a distance of 20 meters among stakes. After that, the stakes were read by the total station and two theodolites of different precisions. The geometric leveling was done by a precision level. The data were input in the DataGeosis software and the numerical modelling of the land was made with mesh of maximum rigidity, generating planialtimetric representation for each rising. It was verified, through comparison of the four representations that little variations occur in relation to the control. The closest representation of the control was the planialtimetry based on the data from the total station, in which the representations obtained from the theodolites were identical among themselves. It was concluded that in the process of obtaining detailed planialtimetry of small areas, submitted to the grid, it was not necessary to use composed geometric leveling, reducing work to the exclusive use of a total station or conventional theodolite.

Caracterização das falhas de transferência na porção norte da Bacia de Santos a partir da integração de dados geológicos e geofísicos

Structures transverse/sub-transverse to the shoreline have been identified and characterized on the precambrian basement outcrop on the continent adjacent to the northern Santos Basin. These structures were analyzed from images of digital elevation model SRTM 90m by extracting NW-SE lineaments that intersect the NE-SW foliation. The lineaments were selected, classified into 48 segments that extend toward offshore, and correlated with basin structures. In the basin 25 2D seismic sections, 12 well logs and data from potential methods were interpreted, identifying the key stratigraphic levels and the major structures. Structural maps of each horizon were generated. Six transfer faults (FTs) were recognized and named FT-1 to FT-6, whose extensions correspond to continental lineaments named FC1 to FC6. The FTs are related to the basin deformation and evolution. In seismic sections, these faults have lateral slip in flower structures, displacement inversions from normal at the top to reverse at the base, abrupt changes in thickness or even disappearance of the seismic reflectors. The structural map of the Basement and Top of the Rift shows control of some depocenters by faults and displacements in some areas. The maps of potential methods indicate that there are pronounced anomaly shifts in some areas, associated with FTs. Some seismic sections indicate reactivation of FTs when they intersect horizons from the basement until the most recent layers. The 3D integration of data facilitated the observation of the FT extensions in the continent discontinuity.

Batimetria fluvial estimada com dados orbitais: Estudo de caso no alto curso do rio Paraguai com o sensor ASTER

The Paraguay River is the main tributary of the Paraná River and has an extension of 1.693 km in Brazilian territory. The navigability conditions are very important for the regional economy because most of the central-west Brazilian agricultural and mineral production is transported by the Paraguay waterway. Increased sedimentation along the channel requires continuous dredging to waterway maintenance. Systematic bathymetric surveys are periodically carried out in order to check depth condition along the channel using echo-sounding devices. In this paper, digital image processing and geostatistical analysis methods were used to analyze the applicability of the ASTER sensor to estimate channel depths in a segment of the upper Paraguay River. The results were compared with field data in order to choose the band with better adjustment and to evaluate the standard deviation. Comparing the VNIR bands, the best fit was presented by the red wavelength (band 2; 0,63 - 0,69 μm), showing a good representation of the channel depths shallow than 1,7 m. Applying geostatistical methods, the model accuracy was enhanced from 43 cm to 36 cm and undesired components were slacked. It was concluded that the digital number of band 2, converted to bathymetry information allows a good estimation of river depths and channel morphology.