Preliminary results of a floating subirrigation system (Aquaforest system) as an alternative to conventional tree nurseries

A new methodology for tree seedling production (Aquaforest system) based on a continuous floating subirrigation system was developed and tested using creeks with different nutrient levels. Eucalyptus grandis seedlings were produced in water from polluted and clean creeks, and compared to conventional tree nursery production. The growth variables analyzed in the seedling phase were: survival, height, diameter, shoot and root dry weight, leaf area, and root/shoot ratio. Water and substrate were analyzed, as well as leaf nutritional status. Plant survival was 100% in all treatments. Height and diameter were greater in the higher nutrient water treatment. Leaf area and dry weight of plants produced in the higher nutrient water treatment were similar to those of the control. The results showed that polluted water can represent a good nutrient source. The preliminary results show that the Aquaforest system can be a viable alternative for tree seedling production. (C) 2004 Elsevier B.V. All rights reserved.

Assistência de ar em barra de pulverização no controle da ferrugem asiática da soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Volatile compounds from organic and conventional passion fruit (Passiflora edulis F. Flavicarpa) pulp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental murine mycobacteriosis: evaluation of the functional activity of alveolar macrophages in thalidomide- treated mice

Thalidomide is a selective inhibitor of tumor necrosis factor-alpha (TNF-alpha), a cytokine involved in mycobacterial death mechanisms. We investigated the role of this drug in the functional activity of alveolar macrophages in the presence of infection induced by intranasal inoculation of Mycobacterium avium in thalidomide-treated and untreated adult Swiss mice. Sixty animals were inoculated with 5 x 10(6) M. avium by the respiratory route. Thirty animals received daily thalidomide (30 mg/kg mouse) and 30 received water by gavage up to sacrifice. Ten non-inoculated mice were used as a control group. Lots of animals from each group were evaluated until 6 weeks after inoculation. Infection resulted in an increased total number of inflammatory cells as well as increased activity of pulmonary macrophages. Histologically, intranasal inoculation of bacilli resulted in small mononuclear infiltrates located at the periphery of the organ. Culture of lung fragments revealed the presence of bacilli only at the beginning and at the end of the experimental period. Thalidomide administration did not affect the microbiological or histological features of the infection. Thalidomide-treated and untreated animals showed the same amount of M. avium colonies 3 weeks after infection. Although it did not affect bacillary clearance, thalidomide administration resulted in a decreased percent of spread cells and release of hydrogen peroxide, suggesting that factors other than TNF-alpha play a role in the killing of mycobacteria by alveolar macrophages. Thalidomide administration also reduced the number of spread cells among resident macrophages, suggesting a direct effect of the drug on this phenomenon.

Experimental study of the conventional equation to determine a plate's moment of inertia

In this work, we describe an experimental setup in which an electric current is used to determine the angular velocity attained by a plate rotating around a shaft in response to a torque applied for a given period. Based on this information, we show how the moment of inertia of a plate can be determined using a procedure that differs considerably from the ones most commonly used, which generally involve time measurements. Some experimental results are also presented which allow one to determine parameters such as the exponents and constant of the conventional equation of a plate's moment of inertia.

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

Studies on the cooling minimum quantity and conventional cooling at hardened steels in grinding process

The purpose of this work is to explain the concept of cutting fluids reasonable usage through the fluid minimum quantity in grinding processes. on that purpose, the development of a new nozzle and an own and adequate methodology should be required in order to obtain good results and compare them to the conventional methods. The analysis of the grinding wheel/cutting fluid performance was accomplished from the following input parameters: flow rate variation by nozzle diameter changes (three diameters values: 3mm, 4mm and 5mm), besides the conventional round nozzle already within the machine. Integral oil and a synthetic emulsion were used as cutting fluids and a conventional grinding wheel was employed. The workpieces were made of steel VC 131, tempered and quenched with 60HRc. Thus, as the flow rate and the nozzle diameter changes, keeping steady fluid jet velocity (equal to cutting velocity), attempted to find the best machining conditions, with the purpose to obtain a decrease on the cutting fluid volume, taking into consideration the analysis of the process output variables such as cutting strength, cutting specific energy, grinding wheel wear and surface roughness. It was verified that the 3mm diameter optimized nozzle and the integral oil, in general, was the best combination among all proposed.

Conventional and microwave sintering of CaCu(3)Ti(4)O(12)/CaTiO(3) ceramic composites: non-ohmic and dielectric properties

The non-ohmic and dielectric properties as well as the dependence on the microstructural features of CaCu(3)Ti(4)O(12)/CaTiO(3) ceramic composites obtained by conventional and microwave sintering were investigated. It was demonstrated that the non-ohmic and dielectric properties depend strongly on the sintering conditions. It was found that the non-linear coefficient reaches values of 65 for microwave-sintered samples and 42 for samples sintered in a conventional furnace when a current density interval of 1-10 mA cm(-2) is considered. The non-linear coefficient value of 65 is equivalent to 1500 for samples sintered in the microwave if a current interval of 5-30 mA is considered as is shortly discussed by Chung et al (2004 Nature Mater. 3 774). Due to a high non-linear coefficient and a low leakage current (90 mu A) under both processing conditions, these samples are promising for varistor applications. The conventionally sintered samples exhibit a higher relative dielectric constant at 1 kHz (2960) compared with the samples sintered in the microwave furnace (2100). At high frequencies, the dielectric constant is also larger in the samples sintered in the conventional furnace. Depending on the application, one or another synthesis methodology is recommended, that is, for varistor applications sintered in a microwave furnace and for dielectric application sintered in a conventional furnace.

Uso de câmara úmida em enxertia convencional de maracujazeiro-amarelo sobre três porta-enxertos

A propagação do maracujazeiro através da enxertia poderá ser a solução para o controle de doenças do sistema radicular. Assim, com o objetivo de avaliar o desenvolvimento e a sobrevivência de plantas enxertadas de maracujazeiro-amarelo (Passiflora edulis Sims) em três porta-enxertos, utilizando-se de câmara úmida, instalou-se este experimento em um viveiro de mudas no município de Adamantina-SP, no período de dezembro de 2005 a abril de 2006. O delineamento experimental utilizado foi em blocos ao acaso, em esquema fatorial 3 x 2, com quatro repetições e 10 plantas/parcela. Os fatores avaliados foram três porta-enxertos (Passiflora edulis, P. alata e P. gibertii)em dois ambientes (com e sem câmara úmida). Foi utilizada a enxertia convencional pelo método de garfagem tipo fenda cheia. Avaliaram-se a sobrevivência e a altura dos enxertos, o diâmetro do caule do porta-enxerto e do enxerto, o número de folhas e a fitomassa seca da parte aérea e das raízes. Verificaram-se melhores resultados com os porta-enxertos P. edulis e P. gibertii, superiores ao P. alata em todas as variáveis estudadas. Os maiores índices de sobrevivência foram observados em P. edulis e P. gibertii, com 100% e 98,8%, respectivamente. Apesar de o P. alata ter-se mostrado inferior, é viável o uso deste material como porta-enxerto para o maracujazeiro-amarelo. O uso da câmara úmida favoreceu o pegamento dos enxertos em P. alata.

Características físicas e químicas de frutos de maracujazeiro-amarelo enxertado em três porta-enxertos

O mercado de frutas frescas do maracujá-amarelo valoriza a qualidade interna e externa dos frutos. Assim, este trabalho teve o objetivo de avaliar o efeito do porta-enxerto e do tipo de enxertia na qualidade dos frutos de maracujazeiro-amarelo (Passiflora edulis Sims). O experimento foi conduzido no município de Adamantina-SP, no período de abril de 2006 a junho de 2007, adotando-se o delineamento em blocos ao acaso, em esquema fatorial 3 x 2 + 1 tratamento adicional, com quatro repetições. Os porta-enxertos avaliados foram: P. edulis (maracujá-amarelo), P. alata (maracujá-doce) e P. gibertii (maracujá-giberti), em dois tipos de enxertia: hipocotiledonar e convencional por garfagem tipo fenda cheia e um tratamento adicional, sem enxertia. Utilizou-se como copa o maracujazeiro-amarelo (Passiflora edulis Sims). Avaliaram-se o comprimento, o diâmetro, a massa fresca e a classificação dos frutos no período de novembro de 2006 a abril de 2007, a massa e a espessura da casca dos frutos, o rendimento do suco, o teor de sólidos solúveis totais (SST), a acidez total titulável (ATT) e o ratio (SST/ATT) dos frutos no mês de dezembro de 2006. O diâmetro e a massa fresca de frutos obtidos de plantas enxertadas sobre P. gibertii foram inferiores em relação aos de plantas pé-franco e aos de plantas enxertadas sobre P. alata. Os maiores comprimentos de frutos foram encontrados em plantas não enxertadas. Os porta-enxertos utilizados não influenciaram no teor de SST, na ATT e no ratio. O método de enxertia não interfere no diâmetro, no comprimento, na massa fresca dos frutos, na massa e na espessura da casca, no rendimento do suco e no teor de SST.

Effects of epidural administration of dexmedetomidine on the minimum alveolar concentration of isoflurane in dogs

Objective-To evaluate the effects of epidural administration of 3 doses of dexmedetomidine on isoflurane minimum alveolar concentration (MAC) and characterize changes in bispectral index (BIS) induced by nociceptive stimulation used for MAC determination in dogs.Animals-6 adult dogs.Procedures-Isoflurane-anesthetized dogs received physiologic saline (0.9% NaCl) solution (control treatment) or dexmedetomidine (1.5 [DEX1.5], 3.0 [DEX3], or 6.0 [DEX6] mu g/kg) epidurally in a crossover study. Isoflurane MAC (determined by use of electrical nociceptive stimulation of the hind limb) was targeted to be accomplished at 2 and 4.5 hours. Changes in BIS attributable to nociceptive stimulation and cardiopulmonary data were recorded at each MAC determination.Results-With the control treatment, mean +/- SD MAC values did not change over time (1.57 +/- 0.23% and 1.55 +/- 0.25% at 2 and 4.5 hours, respectively). Compared with the control treatment, MAC was significantly lower at 2 hours (13% reduction) but not at 4.5 hours (7% reduction) in DEX1.5-treated dogs and significantly lower at 2 hours (29% reduction) and 4.5 hours (13% reduction) in DEX3-treated dogs. The DEX6 treatment yielded the greatest MAC reduction (31 % and 22% at 2 and 4.5 hours, respectively). During all treatments, noxious stimulation increased BIS; but changes in BIS were correlated with increases in electromyographic activity.Conclusions and Clinical Relevance-In dogs, epidural administration of dexmedetomidine resulted in dose-dependent decreases in isoflurane MAC and that effect decreased over time, Changes in BIS during MAC determinations may not represent increased awareness because of the possible interference of electromyographic activity.

Estudo comparativo do bloqueio combinado femoral-isquiático, por punção em sítio único, com anestesia subaracnóidea para cirurgia unilateral do membro inferior

JUSTIFICATIVA E OBJETIVOS: A raquianestesia unilateral pode apresentar vantagens em pacientes ambulatoriais. O objetivo deste trabalho foi comparar a raquianestesia unilateral com o bloqueio combinado femoral-isquiático em cirurgias ortopédicas unilaterais e ambulatoriais. MÉTODO: Sessenta pacientes foram aleatoriamente separados em dois grupos para receber 6 mg de bupivacaína hiperbárica ou hipobárica (grupo RQ) em decúbito lateral esquerdo ou 800 mg de lidocaína 1,6% com epinefrina nos nervos femoral e isquiático (grupo CFI) em decúbito dorsal. O bloqueio dos nervos foi realizado com agulha de 150 mm conectada a um neuroestimulador e inserida no ponto médio entre as duas abordagens clássicas, sendo injetados 15 mL no nervo femoral e 35 mL no nervo isquiático. Avaliados o tempo para realização dos bloqueios e sua duração. Vinte minutos após, os pacientes foram avaliados em relação aos bloqueios sensitivo e motor. RESULTADOS: O tempo para a realização da raquianestesia foi significativamente menor do que o bloqueio combinado femoral-isquiático. O bloqueio unilateral foi obtido em 90% dos pacientes no grupo RQ e 100% no grupo CFI. O tempo para recuperação do bloqueio sensitivo e motor foi significativamente maior no grupo CFI. Não houve bradicardia ou hipotensão. CONCLUSÕES: Este estudo conclui que é tecnicamente fácil realizar bloqueio anterior combinado femoral-isquiático e pode ser uma alternativa para o bloqueio unilateral do membro inferior. A raquianestesia unilateral com baixas doses de bupivacaína resultou em menor tempo para realização, menor número de tentativas e recuperação mais precoce do bloqueio combinado femoral-isquiático, porém com mesma efetividade.

Implante de filtro em veia cava inferior dupla: relato de caso e revisão da literatura

Veia cava inferior dupla é uma variação anatômica rara cuja prevalência é de 0,2-3%. O implante de filtro de veia cava, quando indicado em casos com duplicidade da veia cava inferior, pode ser realizado de diferentes formas: em ambas as veias cavas; em uma delas, embolizando a anastomose entre ambas; em somente uma delas; ou por implante supra-renal. Relatamos um caso de trombose venosa profunda no pós-operatório de implante de prótese de quadril com contra-indicação para tratamento anticoagulante e cuja cavografia evidenciou duplicidade de veia cava inferior. O implante de filtro de veia cava inferior realizado em posição supra-renal mostrou-se opção adequada e segura.