Seed germination in Miconia theaezans (Bonpl.) Cogniaux (Melastomataceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of light and temperature on seed germination in Tibouchina mutabilis (Vell.) Cogn. (Melastomataceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Temperatura e substrato para o teste de germinação de sementes de barbatimão ((Stryphnodendron adstringens (Mart.) Coville (Leguminosae))

As normas oficiais para análise de sementes não estabelecem critérios para a execução de testes de germinação da maioria das espécies florestais. Assim, o objetivo deste trabalho foi a determinação do substrato, da temperatura e da necessidade de superação da dormência das sementes para o teste de germinação de Stryphnodendron adstringens. Foram avaliados o tratamento de escarificação com ácido sulfúrico por 60 min, os substratos vermiculita, rolo de papel, areia e solo e as temperaturas constantes de 20, 25, 30 e 35 ºC e alternadas de 15-35 ºC e 20-30 ºC, utilizando-se a primeira contagem de germinação (7 dias) e a porcentagem de plântulas normais, anormais, sementes mortas e dormentes (42º dia após a semeadura) com quatro repetições de 50 sementes. As sementes de S. adstringens devem ser submetidas ao teste de germinação, após superação da dormência, em substrato papel e nas temperaturas constantes de 25, 30 ou 35 ºC ou alternadas de 20-30 ºC.

Exercício físico e menopausa

A deficiência de estrógenos, as alterações do perfil lipídico, o ganho de peso e o sedentarismo são considerados os principais fatores para a maior prevalência de hipertensão arterial em mulheres na menopausa. Na tentativa de reduzir a incidência da hipertensão arterial nessa população, diversas abordagens têm sido empregadas, porém a maioria dos trabalhos mostra que, nesse momento, a mudança de estilo de vida parece ser a melhor estratégia para o controle da hipertensão arterial e de seus fatores de risco nessa fase de vida da mulher - entre elas a prática de atividade física regular. O exercício físico contínuo, no qual a intensidade é mantida constante (leve/moderada), tem sido empregado na maioria dos trabalhos dentro da área de Saúde, com evidentes efeitos benéficos sobre as doenças cardiovasculares e endócrino-metabólicas. A prescrição do exercício contínuo caracteriza-se por atividades de pelo menos 30 minutos, três dias por semana, numa intensidade de 50 a 70% da frequência cardíaca máxima. O exercício físico intermitente caracteriza-se por alterações em sua intensidade durante a realização do treinamento, podendo variar de 50 a 85% da frequência cardíaca máxima, durante dez minutos. Atualmente, o exercício físico intermitente tem sido também empregado como forma de treinamento físico em diversas clínicas de controle de peso e em treinamentos personalizados, o que é devido ao menor tempo de execução do exercício físico intermitente. Além disso, trabalhos mostram que as adaptações metabólicas e o condicionamento físico são similares aos observados no exercício contínuo, que exigem maior tempo de execução para obter as mesmas adaptações celulares. Assim, essa revisão abordou a importância do exercício físico no controle da pressão arterial bem como os principais estudos conduzidos em modelos experimentais de menopausa e em mulheres, relacionando a hipertensão arterial e os mecanismos envolvidos em sua gênese e as perspectivas futuras.

Aplicação do teste de raios x no estudo da morfologia interna e da qualidade fisiológica de aquênios de arnica (Lychnophora pinaster Mart.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade sanitária e germinação de sementes de pinhão-manso

O pinhão-manso é uma espécie arbustiva que está se destacando pelo interesse para produção de biocombustível, porém, os estudos sobre controle de qualidade das sementes estão se iniciando. Neste trabalho objetivou-se estudar o efeito da temperatura e do tempo de contagem na germinação de sementes de pinhão-manso, conduzido em papel toalha bem como avaliar a qualidade sanitária das sementes, desinfestadas ou não com hipoclorito de sódio, a 2%. O estudo foi conduzido, com sementes de pinhão-manso extraídas de frutos maduros, coletados na planta. O teste de germinação foi conduzido nas temperaturas de 25 ºC e alternadas de 20-30 ºC, com contagens aos 6, 9 e 12 dias. O teste de sanidade foi conduzido a 20 ºC com fotoperíodo de 12 h por 7 dias. Foi utilizado o delineamento experimental inteiramente casualizado com quatro repetições e empregado o teste F na análise de variância dos dados de germinação e do índice de velocidade de germinação. As médias foram comparadas pelo teste de Tukey a 5% de probabilidade. O potencial máximo de germinação das sementes de pinhão-manso foi obtido na temperatura de 25 ºC, com contagens aos seis, nove e 12 dias, entretanto não apresentou diferença significativa com as temperaturas de 20-30 ºC, nas contagens aos 9 e 12 dias. As sementes de pinhão-manso analisadas apresentaram alta frequência de espécies fúngicas, independente da desinfestação superficial. A incidência de fungos em ordem decrescente foi dos gêneros: Alternaria, Macrophomina, Cladosporium, Colletotrichum, Fusarium, Pestalotiopsis, Phoma, Helminthosporium, Epicocum e Nigrospora a maioria destes fungos apresenta potencial patogênico.

The Effect of the Aminic Substituent on the Thermal Decomposition of Cyclic Dithiocarbamates

Estudos termogravimétricos e calorimétricos diferenciais para ditiocarbamatos de NH4+, Na+, Zn2+, Cd2+ e Pb2+, derivados de aminas cíclicas contendo nitrogênio como heteroátomos, foram realizados em atmosferas de ar e nitrogênio, para avaliar a influência da tensão angular dos anéis na decomposição térmica destes compostos, em relação à formação de tiocianatos metálicos como via de decomposição. Os intemediários formados foram caracterizados por difração de raios-X, tendo sido encontrados oxissulfatos de Zn2+, Cd2+ e Pb2+, sob atmosfera de ar, o que sugere a decomposição térmica nestas condições como via sintética para estes compostos. Os produtos de decomposição final obtidos foram sulfetos metálicos sob nitrogênio e óxidos dos metais de transição e sulfato de sódio sob ar. Entalpias de fusão são também descritas, com base nos resultados de DSC.

Effects of the seed predator Acanthoscelides schrankiae on viability of its host plant Mimosa bimucronata

Seeds of Mimosa bimucronata are heavily infested (pre-dispersal predation) by the bruchid beetle Acanthoscelides schrankiae in Brazil. In this study, firstly we set up experiments to assess seed germination under seven and six different light and temperature regimes, respectively, and then we evaluated the ability of seeds to germinate after predation. We tested the hypothesis that the non-predated seeds from infested fruits may respond differently when set for germination than those seeds of non-infested fruits. We also hypothesized that predation may increase the production of unviable seeds. Seeds under 18 hours of light presented the highest percentage of germination, and the alternating temperature 20-30 degrees C was considered as optimum for germination (abnormal seedlings were not considered as a successful germination). Germination of seeds from non-infested fruits was significantly higher than germination of non-predated seeds from infested fruits, and predation also caused a significant increase in the proportion of dead seeds. Our results also show a positive correlation between proportions of unviable seeds and predated seeds. These results demonstrated that seeds of M. bimucronata are strongly affected by predation because predated seeds did not germinate and non-predated seeds had their viability reduced when located in infested fruits, supporting our hypothesis.

Electron transfer between adjacent layers in self-assembled films

A simple model of electron transfer is adapted to explain fluorescence quenching in self-assembled films of poly( p-phenylene vinylene) (PPV) alternating with poly(thiophene acetic acid) (PTAA). Quenching is caused by a photo-induced electron transfer between the excited PPV (donor, D) and the PTAA (acceptor, A). The electron-transfer process can be mediated by insertion of electronically inert spacing bilayers between the D and A layers, As the number of bilayers is increased, the fluorescence is gradually recovered which is explained theoretically by assuming that the electron-transfer rate can be described as k = Z exp(- beta r) where r is the distance between D and A. (C) 2000 Elsevier B.V. B.V. All rights reserved.

Mechanically activating formation of layered structured bismuth titanate

Bismuth titanatc-Bi(4)Ti(3)O(12) (BIT) with wide application in the electronic industry as capacitors, memory devices and sensors is the simplest compound in the Aurivillius family, which consists of (Bi(2)O(2))(2+) sheets alternating with (Bi(2)T(i)3O(10))(2-) perovskite-like layers. The synthesis of more resistive BIT ceramics would be preferable advance in obtaining of well-densified ceramic with small grains randomly oriented to limit the conductivity along the (Bi(2)O(2))(2+) layers. Having in mind that the conventional ceramic route for the synthesis can lead to non-stoichiometry in composition, in consequence of the undesirable loss in bismuth content through volatilization of Bi(2)O(3) at elevated temperature, our efforts were addressed to preparation of BIT by mechanical activation the constituent oxides. The nucleation and phase formation of BIT, crystal structure, microstructure, powder particle size and specific surface area were followed by XRD, Rietveld refinement analysis, thermal analysis, scanning electron microscopy (SEM) and the BET specific surface area measurements. (c) 2005 Elsevier B.V. All rights reserved.

Improvement of the dielectric and ferroelectric properties in superlattice structure of Pb(Zr,Ti)O-3 thin films grown by a chemical solution route

Making heterolayered perovskite materials constitutes an approach for the creation of better dielectric and ferroelectric properties. In the experiment reported here, heterolayered PZT40/PZT60 films were grown on Pt/Ti/SiO2/Si (100) by a chemical solution deposition. The dielectric constant of the heterolayered thin film was significantly enhanced compared with that of pure PZT40 and PZT60 thin films. A dielectric constant of 701 at 100 kHz was observed for a stacking periodicity of six layers having a total thickness of 150 nm. The heterolayered film exhibited greater remanent polarization than PZT60 and PZT40 films. The values of remanent polarization were 7.9, 18.5, and 31 muC/cm(2), respectively, for pure PZT60, PZT40, and heterolayered thin films, suggesting that the superior dielectric and ferroelectric properties of the heterolayered thin film resulted from a cooperative interaction between the ferroelectric phases made from alternating tetragonal and rhombohedral phases of PZT, simulating the morphotropic phase boundary of this system. (C) 2004 American Institute of Physics.

Structure of a glycoglucuronomannan from the low-viscosity gum of Vochysia lehmannii

The polysaccharide (VSP) from the gum exudate of quaruba (Vochysia lehmannii) had two components of almost identical M. centred at 24,800, as shown by HSPEC-MALLS. The presence of aggregates was shown since carboxy-reduction gave VSP-RED, which contained low molecular weight components with M-w 19,000 > 5800 and polydispersity ratios dn/dc 0.160 and 0.149, respectively. VSP formed low viscosity aqueous solutions and acid hydrolysis gave Man (30%), Ara (16%), Gal (10%), and Glc (14%). The latter arose partly from GlcA (30%). Methylation analysis revealed mainly neutral units of 2-O- (60%) and 2,3-di-O-substituted Manp (5%), and those of nomeducing ends (8%), 2-O- (3%), and 4-O-substituted Arap and/or 5-O-substituted Araf units (6%). VSP-RED contained Glc (45%), Man (35%), and Ara (13%) and methylation analysis indicated mainly 4-O-substituted Glcp (31%) and 2-O- (51%) and 2,3-di-O-substituted Manp units (5%). A predominant alternating structure for VSP was shown by its C-13 NMR spectrum, which contained 10 main signals and a small one of C-6 of GlcpA. This was confirmed by formation, on partial hydrolysis of VSP, of a tetrasaccharide, which was characterised by NMR spectroscopy and ESI-MS as beta-GlcpA-(1 --> 2)-alpha-Manp-(1 --> 4)-beta-GlcpA-(1 --> 2)-Man, which arose from the main chain, thus confirming VSP to be a glycoglucuronomannan. (C) 2004 Elsevier Ltd. All rights reserved.

Economic design of two-stage (X)over-bar charts: the Markov chain approach

When the (X) over bar chart is in use, samples are regularly taken from the process, and their means are plotted on the chart. In some cases, it is too expensive to obtain the X values, but not the values of a correlated variable Y. This paper presents a model for the economic design of a two-stage control chart, that is. a control chart based on both performance (X) and surrogate (Y) variables. The process is monitored by the surrogate variable until it signals an out-of-control behavior, and then a switch is made to the (X) over bar chart. The (X) over bar chart is built with central, warning. and action regions. If an X sample mean falls in the central region, the process surveillance returns to the (Y) over bar chart. Otherwise. The process remains under the (X) over bar chart's surveillance until an (X) over bar sample mean falls outside the control limits. The search for an assignable cause is undertaken when the performance variable signals an out-of-control behavior. In this way, the two variables, are used in an alternating fashion. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A study is performed to examine the economic advantages of using performance and surrogate variables. (C) 2003 Elsevier B.V. All rights reserved.

Electrical characterization of in situ polymerized polyaniline thin films

The alternating conductivity, sigma*(f) = sigma'(f) + i sigma ''(f), of in situ polymerized polyaniline thin films doped with hydrochloric acid, deposited on top of an interdigitated gold line array previously deposited on glass substrates, were measured in the frequency (f) range between 0.1 Hz to 10 MHz and in the temperature range from 100 to 430 K. The results for sigma'(f) are typical of a disordered solid material: for frequencies lower than a certain hopping frequency gamma(hop), log[sigma'(f)] is frequency-independent rising almost linearly for in logf > gamma(hop). A master curve was thus obtained by plotting the real component of the conductivity using normalized scales sigma'(f)/sigma(dc) and f/gamma(hop) which is indicative of a single process operating in the whole frequency range. An expression encompassing the conduction through a disordered structure taken from previous random free energy barrier model for hopping carriers, as well a dielectric function to represent the capacitive behavior of the PAni was employed to fit the experimental results. The dielectric constant and activation energy for hopping carriers were obtained as function of the polymer doping level. (c) 2007 Elsevier B.V. All rights reserved.

Seed maturation and effect of temperature regime on Trema micrantha (L.) Blume seed germination

T. micrantha (L.) Blume (Ulmaceae), a common pioneer tree species in Brazil, is used in the restoration of degraded areas. The fruits are fleshy and indehiscent, with only one water impermeable seed. During the fruiting period, fruits of different colours are found at the same time on the same branch. This research aimed to correlate fruit colour with other physical indicators of seed maturity and to Verify the effect of temperature regime on seed germination. Collected fruits were separated in to green, green-red and red colour and for each of these maturation stages, size, moisture content and dry matter of both fruits and seeds were determined. Seeds were scarified with sulphuric acid and submitted to a germination test conducted at constant (20 degreesC, 30 degreesC and 40 degreesC) and alternating (20-30 degreesC, 30-40 degreesC and 20-40 degreesC) temperatures for 15 weeks. Seed germination percentage and speed were analysed after five weeks and the fmal percentage of germinated and Viable seeds after 15 weeks. Seed maturity is attained when the fruits are green-red. At this stage, moisture content was about 64% for fruits and 10% for seeds. Alternating temperature was required for seed germination and 20-30 degreesC was the best option. Most seeds had germinated after five weeks, providing mature seeds, acid scarification and alternating temperature were used.