67 resultados para 783


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The processing of titanium porous coatings using powder metallurgy technique to achieve a porous structure that allows osseointegration with bone tissue was discussed. The porous microstructure exhibited micropores and interconnected macropores with size ranges that allowed bone ingrowth. The macropores in the coatings were originated from the binder evaporation while the micropore was related with the porous titanium powder and the low compaction pressure used. The in vivo evaluation indicated that osseointegration had occurred between the bone and porous material.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Purpose: To evaluate the fatigue resistance of the bond between dentin and glass-infiltrated alumina ceramic, using different luting protocols. Materials and Methods: The null hypothesis is that the fatigue resistance varies with the luting strategy. Forty blocks of In-Ceram Alumina were prepared, and one surface of each block was abraded with 110-μm aluminum oxide particles. Then, the blocks were luted to flat dentin surfaces of 40 human third molars, using 4 different luting strategies (luting system [LS]/ceramic surface conditioning [CSC]) (n=10): (G1) [LS] RelyX-Unicem/[CSC] airborne abrasion with 110-μm Al2O3 particles; (G2) [LS] One-Step + Duo-Link (bis-GMA-based resin)/[CSC] etching with 4% hydrofluoric acid + silane agent; (G3) [LS] ED-Primer + Panavia F (MDP-based resin)/[CSC] Al2O 3; (G4) [LS] Scotchbond1+RelyX-ARC (bis-GMA-based resin)/[CSC] chairside tribochemical silica coating (air abrasion with 30-μm SiO x particles + silane). After 24 h of water storage at 37°C, the specimens were subjected to 106 fatigue cycles in shear with a sinusoidal load (0 to 21 N, 8 Hz frequency, 37°C water). A fatigue survivor score was given, considering the number of the fatigue cycles until fracture. The failure modes of failed specimens were observed in a SEM. Results: G3 (score = 5.9, 1 failure) and G4 (score = 6, no failures) were statistically similar (p = 0.33) and had significantly higher fatigue resistance than G1 (score = 3.9, 5 failures) and G2 (score = 3.7, 6 failures) (p < 0.03). SEM analysis of fractured specimens of G1 and G2 showed that almost all the failures were between ceramic and cement. Conclusion: The MDP-based resin cement + sandblasting with Al2O3 particles (G3) and bis-GMA-based resin cement + tribochemical silica coating (G4), both using the respective dentin bonding systems, were the best luting protocols for the alumina ceramic. The null hypothesis was confirmed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objective: To increase the knowledge base regarding pulmonology research in Brazil. Methods: A retrospective, observational study of the abstracts published in the Annals of the Brazilian Pulmonology and Phthisiology Conferences held from 1986 to 2004, quantifying the institutions of origin by geographic distribution and type, as well as categorizing the abstracts by study design and topic. Results: A total of 6467 abstracts were published. The institutions of origin were located, variously, in the Southeast (3870 abstracts), South (1309), Northeast (783), Central-West (267) and North (84). There were 94 abstracts originating from foreign institutions, especially from institutions in Portugal (56.3%) and the United States (13.8%). Most of the studies (5825) were conducted in public Brazilian institutions. There were 4234 clinical studies, 1994 case reports and 239 original research articles. A marked, progressive increase was observed in the number of clinical studies and case reports during the period evaluated. Overall, the most common themes were tuberculosis and other infections diseases (25.2%), following by oncology (11.6%), interstitial lung diseases (8.8%) and thoracic surgery (8.5%). Nevertheless, the number of abstracts on each topic varied widely from year to year. Conclusion: Public Brazilian institutions are the principal sources of pulmonology research in Brazil. Such research activity is concentrated in the southeastern part of the country. Case reports account for one-third of this activity. Although there was great variability in the subjects addressed, diseases that are highly prevalent in Brazil, such as tuberculosis and other infections diseases, were the most common topics.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We aimed to evaluate the risk factor of serum reactive dogs to antileptospire agglutinin and their spatial distribution in an urban area. We collected 1,000 blood samples from dogs at 20 immunization centers, homogeneously distributed in the urban area (32 km2) of Botucatu, Sao Paulo, Brazil. Diagnosis was made by microscopic serum agglutination using 24 serovars of Leptospira spp. Statistical analysis was performed by Goodman's test with 5% of significance. Spatial clusters were tested by spatial scan statistic using SaTScan. We found that 17.9% dogs reacted to Leptospira spp. (p<0.0001). Dogs with street access (22.14%) were more reactive (p<0.05) than those without (14.83%). The scan test indicated only one significant cluster influenced by age. Incorporating each one of the co-variables gender, breed, and street access to age, we found that street access was the most important. Street access and age were the most important risk factors in the large number of reactive animals in the cluster, with the castellonis serovar being the most reactive in urban dogs. The identification of a cluster with more reactive dogs than expected allows local preventive measures to be taken.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Horticultura) - FCA

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Relevância:

10.00% 10.00%

Publicador:

Resumo:

OBJECTIVE: After acute myocardial infarction, during the cardiac repair phase, periostin is released into the infarct and activates signaling pathways that are essential for the reparative process. However, the role of periostin in chronic cardiac remodeling after myocardial infarction remains to be elucidated. Therefore, the objective of this study was to investigate the relationship between tissue periostin and cardiac variables in the chronic cardiac remodeling induced by myocardial infarction. METHODS: Male Wistar rats were assigned to 2 groups: a simulated surgery group (SHAM; n = 8) and a myocardial infarction group (myocardial infarction; n = 13). After 3 months, morphological, functional and biochemical analyses were performed. The data are expressed as means±SD or medians (including the lower and upper quartiles). RESULTS: Myocardial infarctions induced increased left ventricular diastolic and systolic areas associated with a decreased fractional area change and a posterior wall shortening velocity. With regard to the extracellular matrix variables, the myocardial infarction group presented with higher values of periostin and types I and III collagen and higher interstitial collagen volume fractions and myocardial hydroxyproline concentrations. In addition, periostin was positively correlated with type III collagen levels (r = 0.673, p = 0.029) and diastolic (r = 0.678, p = 0.036) and systolic (r = 0.795, p = 0.006) left ventricular areas. Considering the relationship between periostin and the cardiac function variables, periostin was inversely correlated with both the fractional area change (r = -0.783, p = 0.008) and the posterior wall shortening velocity (r = -0.767, p = 0.012). CONCLUSIONS: Periostin might be a modulator of deleterious cardiac remodeling in the chronic phase after myocardial infarction in rats.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar os efeitos da adubação com fósforo e potássio na produção e na qualidade de sementes de soja. Foram realizados experimentos em dois anos agrícolas, em delineamento de blocos ao acaso, em arranjo fatorial 5x3, com cinco doses de fósforo (0, 40, 80, 120 e 160 kg ha‑1 de P2O5 como superfosfato triplo), três de potássio (0, 50 e 100 kg ha‑1 de K2O como cloreto de potássio) e quatro repetições. Foram avaliados: produtividade, número de sementes por planta, número de vagens por planta, peso de mil sementes, germinação, vigor (envelhecimento acelerado, condutividade elétrica e lixiviação de potássio), e teores de P e K na folha e na semente. A produtividade, o peso de mil sementes e a produção de vagens e de grãos por planta aumentaram linearmente com a adubação fosfatada. O aumento na produtividade foi de 17,6%, no primeiro ano, e de 39,7% no segundo. As doses de P, no entanto, não interferiram na germinação e no vigor das sementes. A adubação potássica não altera a produtividade nem a concentração de K nas sementes, mas pode melhorar a germinação, sem interferir no vigor.