Utilização de técnicas de planejamento de experimentos na análise de viabilidade de alterações no processo de pintura de grades Antracite em uma indústria automotiva

The search for better performance and competitive advantage in the current market scenario has made organizations keep their focus on quality planning and the use of effective techniques aimed at continuous improvement and optimization of processes and resources. The situation is not different for the painting process in the automotive industry, which has a significant amount of variables and influential external factors. This work, developed at General Motors in São José dos Campos, aims to analyze the feasibility of changing the painting process of the pickup S10 railings in the Antracite color located in the main line to the another line located in a Painting Repair Booth at the plant and, therefore, to study the possibility about reducing the window of cure for Antracite’s enamel by using Design of Experiments’ techniques. Applying this method is possible to find the best arrangement among studied factors of Painting Repair Booth that are, in this case, the Temperature, in Celsius degrees, and Skid’s Steps, in seconds, and it’s also possible to get their behavior according to quality requirements specified by GM rules for the Brightness and Paint Adhesion on the part. As a result, it can conclude that is possible to paint the S10 Antracite railings in the painting process’ line of Painting Repair Booth, and with the new configuration obtained by the Design of Experiments for the process variables, there are significant gains related to the parts’ quality, costs reduction and the optimization of production capacity, much in the main line as in the line of the Painting Repair Booth

Efeito de dentifrícios fluoretados e suplementados com nanopartículas de trimetafosfato de sódio sobre a desmineralização, remineralização e erosão dentária

Pós-graduação em Ciência Odontólogica - FOA

Efeito de vernizes fluoretados suplementados com trimetafosfato de sódio na desmineralização e remineralização do esmalte bovino: estudos in vitro e in situ

Pós-graduação em Ciência Odontólogica - FOA

Seqüelas em dentes permanentes após trauma nos predecessores decíduos e sua implicação clínica

In regarding to the high prevalence of traumatic dental injuries in primary teeth and the possible disturbances on developing permanent successor germs, an early diagnosis and an adequate establishment of treatment planning are very important to minimize the damage caused by the trauma. Sequelaes can affect the coronal portion (white or yellow-brown discoloration associated or not with enamel hipoplasia, dilacerations of the crown), the root portion (dilaceration, duplication or cessation of root formation) or the whole successor permanent tooth (odontoma sequestration or disturbances of permanent successor eruption). The aim of this study is to make a literature review of the developmental disturbances of permanent teeth followed by traumatic injuries to theirs primary predecessors and to present cases reports to advise the dentists, their patients and parents about the damage that developing permanents teeth can undergo.

Efeito da escovação utilizando dentifrícios com diferentes graus de abrasividade no desgaste do esmalte após o uso de agentes clareadores com e sem cálcio, em diferentes intervalos de tempo

Pós-graduação em Odontologia Restauradora - ICT

Eficácia de um gel com reduzida concentração de fluoreto suplementado com hexametafosfato de sódio sobre o processo de desmineralização do esmalte dentário: estudo in vitro

Pós-graduação em Ciência Odontólogica - FOA

Efeito de nanopartículas de trimetafosfato de sódio associadas a dentifrício com concentração reduzida de fluoreto sobre a desmineralização do esmalte bovino: estudos in vitro e in situ

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Concentração de flúor e cálcio no fluido do biofilme associada ao uso de dentifrícios fluoretados suplementados com trimetafosfato de sódio ou glicerofosfato de cálcio, sob desafio cariogênico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da superfície dentinária bovina na resistência de união de sistemas adesivos

Pós-graduação em Odontologia Restauradora - ICT

Influência da concentração de peróxido de hidrogênio nos agentes clareadores na cor e penetração através da estrutura dental

Pós-graduação em Odontologia Restauradora - ICT

Desgaste superficial do esmalte dental após microabrasão in vitro

The aim of this study was to investigate the enamel wear permanent teeth after plastic stick or low speed rubber cup microabrasion. Ten permanent molars were selected to evaluate enamel wear which were sectioned into mesial and distal halves. Each half of the molars was randomly assigned to one of two experimental groups (n = 10) according to the enamel microabrasion technique: plastic stick (GE) or rubber cup (GT). In both the groups, the enamel was submitted to 10 applications of an abrasive paste comprised of 35% phosphoric acid and pumice powder. The paste was applied for 20 seconds under a pressure of 30 g using the instrument defined for each group (plastic stick or rubber cup). The specimens were evaluated under a stereomicroscope connected to a computer. The enamel wear no was statistically different between GE and GT, which presented a mean wear of 304.74 µm (21.20%) and 338.35 µm (22.75%). In conclusion, superficial enamel wear was seen for both the groups, independent of the technique used for the accomplishment of the microabrasion.

Resistência de união e microinfiltração em restaurações de resina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Accuracy of radiographic examination in determining the depth of approximal carious lesions in primary molars

The purpose of this study was to evaluate the accuracy of the depth of carious lesions on bitewing radiographs. Methods Recently extracted primary molars had their proximal surfaces evaluated visually (EC) and classified as healthy surface (0), signs that suggest the presence of carious lesions in enamel (1), signs of a superficial lesion in dentin (2) and carious lesions in deep dentin (3). Results The results were obtained by consensus between the investigators. The gold standard was determined by histological analysis. The values of sensitivity, specificity, accuracy and area under the ROC (Receiver Operating Characteristic) curve were evaluated. There was equilibrium between sensitivity (76.92% EC and 88.46% ER) and specificity (95.83% EC and 95.83% ER). Accuracy was 86.01% (EC) and 88.46% (ER). The Spearman correlation test was used to prove the correlation between clinical and radiographic examinations (0.886), for clinical and histological (0.736) and for radiographic and histological analysis (0.843).

Desgaste e rugosidade superficial de um cimento de ionômero de vidro nanoparticulado

To compare the abrasion wear resistance and superficial roughness of different glass ionomer cements used as restorative materials, focusing on a new nanoparticulate material. Material and Method: Three glass ionomer cements were evaluated: Ketac Molar, Ketac N100 and Vitremer (3M ESPE, St. Paul, MN, USA), as well as the Filtek Z350 (3M ESPE, St. Paul, MN, USA). For each material were fabricated circular specimens (n=12), respecting the handling mode specified by the manufacturer, which were polished with sandpaper disks of decreasing grit. The wear was determined by the amount of mass (M) lost after brushing (10,000 cycles) and the roughness (Ra) using a surface roughness tester. The difference between the Minitial and Mfinal (ΔM) as well as beroughness of aesthetic restorative materials: an in vitro comparison. SADJ. 2001; 56(7): 316-20. 11. Yip HK, Peng D, Smales RJ. Effects of APF gel on the physical structure of compomers and glass ionomer cements. Oper. Dent. 2001; 26(3): 231-8. 12. Ma T, Johnson GH, Gordon GE. Effects of chemical disinfectants on the surface characteristics and color of denture resins. J Prosthet Dent 1997; 77(2): 197-204. 13. International organization for standardization. Technical specification 14569-1. Dental Materials – guidance on testing of wear resistance – PART I: wear by tooth brushing. Switzerland: ISO; 1999. 14. Bollen CML, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater.1997; 13(4): 258-9. 15. Kielbassa AM, Gillmann C, Zantner H, Meyer-Lueckel H, Hellwig E, Schulte-Mönting J. Profilometric and microradiographic studies on the effects of toothpaste and acidic gel abrasivity on sound and demineralized bovine dental enamel. Caries Res. 2005; 39(5): 380-6. 16. Tanoue N, Matsumara H, Atsuta M. Wear and surface roughness of current prosthetic composites after toothbrush/dentifrice abrasion. J Prosthet Dent. 2000; 84(1): 93-7. 17. Heath JR, Wilson HJ. Abrasion of restorative materials by toothpaste. J Oral Rehabil. 1976; 3(2): 121-38. 18. Frazier KB, Rueggeberg FA, Mettenburg DJ. Comparasion of wearresistance of class V restorative materials. J Esthet Dent. 1998; 10(6): 309-14. 19. Momoi Y, Hirosakil K, Kohmol A, McCabe JF. In vitro toothebrushdentifrrice abrasion of resin-modified glass ionomers. Dent Mater. 1997; 13(2): 82-8. 20. Turssi CP, Magalhães CS, Serra MC, Rodrigues Jr.AL. Surface roughness assessment of resin-based materials during brushing preceded by pHcycling simulations. Oper Dent. 2001; 26(6): 576-84. 21. Wang L, Cefaly DF, Dos Santos JL, Dos Santos JR, Lauris JR, Mondelli RF, et al. In vitro interactions between lactic acid solution and art glassionomer cements. J Appl Oral Sci. 2009; 17(4): 274-9. 22. Carvalho FG, Fucio SB, Paula AB, Correr GM, Sinhoreti MA, PuppinRontani RM. Child toothbrush abrasion effect on ionomeric materials. J Dent Child (Chic). 2008; 75(2): 112-6. 23. Coutinho E, Cardoso MV, De Munck J, Neves AA, Van Landuyt KL, Poitevin A, et al. Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer. Dent Mater. 2009; 25(11): 1347-57. tween Rainitial and Rafinal (ΔRa) were also used for statistical analysis (α=0.05). Results: Except for the composite, significant loss of mass was observed for all glass ionomer cements and the ΔM was comparable for all of them. Significant increase in roughness was observed only for Vitremer and Ketac N100. At the end of the brushing cycle, just Vitremer presented surface roughness greater than the composite resin. Conclusion: All glass ionomer cements showed significant weight loss after 10,000 cycles of brushing. However, only Vitremer showed an increase of roughness greater than the Z350 resin, while the nanoparticulate cement Ketac N100 showed a smooth surface comparable to the composite.

Abordaje conservador y mínimamente invasivo de la hipomineralización molar-incisivo (HMI) - Relato de casos clínicos

Molar-Incisor Hypomineralization (MIH) is a qualitative developmental enamel defect that affects one to four permanent first molars, with or without involvement of permanent incisors. Enamel defects may produce many symptoms that have physical, social and psychological effects and influence day-to-day living or quality of life. The available treatment modalities for teeth with MIH are extensive, ranging from prevention, restoration, to extraction. Factors such as age, patient expectations, severity of the lesion and materials should be considered in the treatment of the patient with MIH. Restoration with composite resin is an alternative choice for posterior and anterior MIH defective teeth and its use has been show acceptable results. This article describes two clinical cases involving pediatric patients with MIH whose procedure of cavity preparation was based on the use of CVD ultrasound diamond tips and restored using composite resin obtaining favorable esthetics results after a 1 year follow-up.