Distribuição temporal dos comportamentos de Pinguins-de-Magalhães (Spheniscus magellanicus) cativos

Em cativeiro, Pinguins-de-Magalhães, Spheniscus magellanicus (Forster, 1781) (Sphenisciformes, Aves) são descritos como sedentários, obesos, pouco interativos e apáticos, costumam apresentar pododermatite e baixo índice de reprodução. Atualmente, existem poucos estudos relacionados a pinguins de cativeiro, dificultando o trabalho de manejo e conservação. Diferentes parâmetros podem ser utilizados para avaliação do bem estar animal, dentre eles a diversidade comportamental e repertório típico da espécie. O presente estudo objetivou avaliar o orçamento temporal e o padrão de distribuição do comportamento de um grupo de seis animais ao longo do dia e em épocas do ano distintas, e relacionar os comportamentos aos indicadores do estado de saúde dos pinguins. Foram estudados animais residentes no Parque Escola SABINA, em Santo André, SP, nos meses de janeiro, março, maio e julho de 2014. O comportamento dos animais locais foi observado por dois dias nos seguintes horários: 8h-8h50min, 9h25- 10h15min, 10h50min-11h40, 12h20-13h10, 13h40-14h30, 15h05-15h55. As lesões de pododermatite foram classificadas seguindo o escore padronizado de 1 a 3 para a classificação de pododermatite nos pinguins. Foi observado que nenhum animal apresentou lesões avançadas de calosidades nas patas, porém quatro demonstraram evolução no bumblefoot. Os animais passaram mais tempo nos seguintes comportamentos: repouso em pé, repouso deitado, nadar, banho, arrumar penas. A duração dos comportamentos variou entre os meses: no mês de julho os pinguins passaram mais tempo nadando e banhando-se e houve uma tendência de redução do repouso. A distribuição dos comportamentos entre os períodos da manhã e da tarde foi distinta dependendo do mês. Em geral, os pinguins passaram mais tempo banhando-se e nadando pela manhã e em repouso à tarde. Dessa forma, os animais apresentaram variação sazonal que seria esperada em condição de vida livre,...

Aplicação da distribuição de poisson para determinação de estoque mínimo de itens de MRO de baixo giro aplicados em manutenção de ativos industriais

Pós-graduação em Engenharia de Produção - FEB

Claritromicina como adjuvante ao debridamento periodontal no tratamento de periodontite agressiva generalizada: estudo controlado randomizado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variação da distribuição do diâmetro eritrocitário e do volume corpuscular médio em cães anêmicos

The anisocytosis is a hematologic finding that is routinely evaluated from the mean corpuscular volume (MCV) and erythrocyte morphology in assessment of blood smears. The present study tested the hypothesis that the coefficient of variation of the red cell distribution width (RDW-CV - Red Cell Distribution Width) is a more sensitive parameter in the evaluation of hematologic anisocytosis, considering different levels of anemia in dogs and reticulocytosis. Blood counts of 102 anemic dogs and 353 control dogs made by automated hematology counter. The anemic animals were grouped according to the degree of anemia (mild, moderate and severe) and also as medullary response by manual reticulocyte count (none, weak, moderate and strong). The RDW-CV was different to the animal groups with moderate and severe anemia, which were higher, compared to the control group and mild anemia. The highest average value of RDW-CV (14.45%) occurred in patients with severe anemia. In the control group had higher MCV value that anemic animals , this may be due to a mixed population of erythrocytes in that group of animals. However, there wasn’t difference in MCV between different degrees of anemia and reticulocytosis. Therefore, the RDW is a more sensitive indicator anisocytosis than VCM and its value is directly proportional to the degree of anemia and reticulocytosis; when combined, the sensitivity for detection of anisocytosis in anemic dogs is greater. The use of reference values established by the clinical laboratory itself is mighty important.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Influência da angulação do implante e tipo de intermediário na distribuição das tensões

The aim of this study was to evaluate the influence of implant angulation and abutment type (UCLA and Estheticone) on stress distribution in screw-retained implant-supported prostheses through photoelasticity. Three models were fabricated with photoelastic resin PL-2 (Vishay, Micro-Measurements Group, Inc Raleigh, N.C., USA) containing one external hexagon implant with 3.75x10mm (Master screw, Conexão Sistemas de Prótese Ltda., Arujá, São Paulo) with 0°, 17° and 30° degrees and a screw-retained prostheses with UCLA and Estheticone abutments. The assembly was positioned in a circular polariscope; axial and oblique (45° degrees) loads of 100N were applied in fixed points on the occlusal crown surfaces by a universal testing machine. The stress generated was photographed and analyzed qualitatively with appropriate software (Adobe Photoshop®). The results demonstrated the same number of fringes for both abutment types for each angulation, with fringes increasing in the same way. A higher number of fringes were closer in the oblique loading mode. It was concluded that there was no significant difference in stress distribution in prostheses with UCLA and Estheticone abutments. Higher stress concentrations were observed with increased implant angulation. Stress concentration and intensity were higher in the oblique load than in axial load application.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Distribuição geográfica de agravos nutricionais entre escolares na cidade de Piracicaba-SP, Brasil

The objective was to map the prevalence of nutritional disorders in children attending the 1st to 4th grade of 12 public elementary schools located in the 5 administrative regions of Piracicaba, SP, each with its own socioeconomic profi le, from 2003 to 2006. A total of 16,068 children, divided into 8,133 (50.6%) girls and 7,935 (49.4%) boys, aged 7 to 11 years, were weighed and measured. Their nutritional status indicators heightfor-age (H/A), weight-for-age (W/A), and body mass index-for-age (BMI/A) were compared with those of the NCHS/CDC 2000 reference population and classifi ed according to the z-score cut-off points recommended by the World Health Organization. During that period, the Western Region, which has the lowest socioeconomic indicators, had the lowest z-score medians of the three anthropometric indicators assessed (p<0.0001) and was the only region to have a higher-than-expected stunting prevalence (3.0% with Z < -2). Excess weight prevalence was higher than expected in all regions. The Central Region, which has the highest socioeconomic indicators, had the highest excess weight prevalence (6.0% with Z > 2). Time had a positive effect on the stunted children, reducing the stunting rates in the regions with the lowest socioeconomic indicators. In conclusion, the three nutritional status indicators showed results suitable to the social and economic characteristics of each region. Although nutritional disorders have particular characteristics, they are a problem to the entire population.

Distribuição dos desembolsos do BNDES no setor sucroenergético no Brasil

The organization and dynamics of the energetic-sugarcane sector in Brazil have suffered the impacts of the “deregulation” process that took place in the 1990s, since when it is no longer monitored by the State. In this scenario, the agribusiness enterprises, in order to survive, act over production, marketing and management of their activities, among others areas, demanding financial investments. The credit lines offered by BNDES (National Bank for Economic and Social Development) are one of the factors that enable the implementation of these actions. In this context, the aim of this study is to assess the connections between BNDES's outlays for the sugarcane sector in Brazil from 2001 to 2008, and the activities of this sector, according to the federation unity and the region in the country. The work is based on: i) literature review and ii) secondary selected data collection aimed at the composition of data series. The organization and analysis of data indicates that the largest amount of money is destined to the south-central region, specifically the state of São Paulo. This is the only state that receives almost all types of financings, an equivalent to 68% of the receptions in the period. The concentration of BNDES's outlays in the south-central region may be linked to the dominance of the sector in this region, either in terms of harvested area, amount of production, employment contracts or number of enterprises.

Ocorrências e distribuição de bactérias resistentes a metais pesados em sedimentos da Baía do Araça, São Sebastião (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)