Influência do tratamento de superfície e do tipo de cimento na retenção de coroas YTZP

Pós-graduação em Odontologia Restauradora - ICT

Corpos-de-prova tubulares soldados e respectivo dispositivo para ensaios de fadiga sob esforços co-planares

O presente modelo de utilidade refere-se à configuração ou configurações de corpos-de-prova tubulares soldados e um dispositivo desenvolvido para induzir-lhes esforços combinados de tração e flexão a partir dos carregamentos axiais. Os corpos-de-prova são compostos por dois tubos metálicos (1, 2) aos quais são soldados dois tubos diversos (3, 4), posicionados diametralmente opostos e em diversos ângulos, preferencialmente em ângulos múltiplos de 15<198>. Refere-se ainda a um dispositivo para ensaio, ao qual são acoplados corpos-de-prova, de modo a permitir ensaios de resistência à fadiga sob esforços coplanares. Os braços do corpo-de-prova (8) são montados nos braços (9) do dispositivo. Pinos (10) são encaixados nos braços (9) e fixados.

Energetic efficiency of an agricultural tractor in function of tire inflation pressure

The tire inflation pressure, among other factors, determines the efficiency in which a tractor can exert traction. It was studied the effect of using two tire inflation pressures, 110.4 kPa in the front and rear wheels, 124.2 kPa in the front wheel and 138 kPa in the rear wheels, the energetic efficiency of an agricultural tractor of 147 kW of engine power, in the displacement speed of 6.0 km.h-1, on track with firm surface, with the tractor engine speed of 2000 rpm. For each condition of the tire pressure, the tested tractor was subjected to constant forces in the drawbar of 45 kN and 50 kN, covering 30 meters. It was used a randomized complete block with a 2x2 factorial arrangement (tire pressure and drawbar power) with four replications, totaling 16 experimental units. Data were subjected to analysis of variance, using the Tukey test at 5% probability for comparison averages. The lowest hourly and specific fuel consumption, the lowest slippage of the wheelsets and the highest efficiency in the drawbar was obtained with the tire inflation pressure of 110.4 kPa in the front and rear tires of the tractor, highlighting that lower pressures improve energetic and operational performance of the tractor.

Transverse maxillary and mandibular growth during and after Bionator therapy: study with metallic implants

INTRODUCTION: This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. OBJECTIVE: The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. METHODS: Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 = before bionator therapy, T2 = after bionator therapy and T3 = 5.74 years after T2. RESULTS: There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. CONCLUSIONS: During the study period only the anterior maxillary area did not show transverse growth.

Soil microbial biomass after two years of the consecutive application of composted tannery sludge

Because the agricultural use of tannery sludge may cause increased risks to soils, composting is recognized as one of the most suitable alternative for tannery sludge recycling. Experiments were conducted under field conditions to evaluate the effects of composted tannery sludge (CTS) on the soil microbial biomass and trace elements after two years of consecutive applications. The following five treatments were used: 0 (without CTS application), 5, 10, 20 and 40 ton ha-1 of CTS (dry basis). Soil samples were collected at 60 days after the CTS application at 0-20 cm depth. The CTS application promoted changes in the soil microbial biomass C (SMB-C) and N (SMB-N). In the first year, significant increases in the SMB-C and SMB-N were observed with the application of 10 ton ha-1. Furthermore, CTS application increased the Cr content in the soil after two years of application.

Planejamento de experimentos em blocos aplicado às propriedades mecânicas de arames de aço para molas

The purpose of this article is to demonstrate an application of the design of block experiments via analysis and multiple linear regression in the investigation of a steel thermal treatment process with multiple responses. The study aimed to design statistical models to predict the mechanical properties in SAE 9254 draw steel wires, with diameters of 2.00 mm and 6.50 mm, after quench hardening and tempering. For this purpose, process input variables (wire diameter, processing speed, tempering temperature and polymer concentration) were investigated regarding their influence on the material tensile strength, yield point and hardness. The results revealed that the mechanical properties of the steel wire are significantly influenced by the selected variables, and analysis of variance (ANOVA) was employed to validate the design of the statistical models. Multiple linear regression allowed for an appropriate representation of the process, and graphical analysis was found to be very useful in displaying the behavior of the multiple responses.

Níquel em solo e plantas de milho cultivadas em área tratada com lodo de esgoto durante 15 anos consecutivos

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Biodiesel de buriti em trator: desempenho em função do tipo de diesel e da proporção de mistura na operação de preparo do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Avaliação longitudinal do crescimento craniofacial de indivíduos classe II tratados e não tratados

Pós-graduação em Ciências Odontológicas - FOAR

Neoliberalismo e hegemonia burguesa: ação social empresarial através dos Institutos Ethos de Responsabilidade Social Empresarial e Empresas e Gife (Grupos de Institutos, Fundações e Empresas)

Pós-graduação em Ciências Sociais - FFC