Compostos fenólicos de 10 variedades de uva

Phenolic compounds represent one of the main groups of secondary metabolites. Due to their chemical diversity, they have a variety of functions in plants, such as protection against ultraviolet radiation, herbivores and pathogens, and attraction of pollinators or dispersers of fruits and seeds. For human, the phenolic compounds are used like food colorings and flavors and, due to their pharmacological properties, mainly to antioxidant activity, they are associated with several health benefits, such as delay senility, prevention and therapy of cardiovascular diseases and of some cancers. The grapes are considered one of the main source of phenolic compounds and the fruit and its products are consumed in Brazil and worldwide. Considering the phenolic compounds diversity and their different distribution in the grape parts, this work had like aims the extraction, identification and quantification of the main classes of phenolic compounds of 10 grape varieties. The content of total phenols, flavanols and anthocyanins were determined, respectively, according to the Folin-Ciocalteu, DMACA and comparison of pH spectrophotometric methods. The content of total phenols varied from 142.75 + 1.86 to 483.39 + 5.90 mg.L-1 in the peel and from 86.50 + 0.54 to 146.32 + 9.97 mg.L-1 in the pulp. The amount of total flavanols varied from 3.68 + 0.03 to 6.92 + 0.26 mg.L-1 in the peel and from 0.90 + 0.00 to 1.36 + 0.00 mg.L-1 in the pulp. The content of total anthocyanins varied from 7.00 + 0.99 to 406.56 + 39.50 mg.L-1 in the peel and from 2.88 + 0.28 to 46.36 + 1.89 mg.L-1 in the pulp. The phenolic compounds concentration was higher in the peel than in the pulp. The total phenols and anthocyanins varied a lot while the total flavanols were more constant. The flavanols represent the smaller portion of phenolic compounds

Influência do condicionamento ambiental sobre as propriedades viscoelásticas de compósitos aramida/epóxi

The increasing application of structural composites in the aerospace industry is mainly due to its low specific weight coupled with its excellent mechanical properties when in service. As a result of climatic variations that pass the aircraft is of paramount importance to study the influence of weathering on this type of material when subjected to such changes. The purpose of this work is to evaluate the mechanical behavior of specimens of kevlar fiber /epoxy matrix composites, by dynamic mechanical thermal analysis (DMA) and interlaminar shear strength tests (ILSS), after passing through three environmental conditioning: saline fog, hygrothermal and ultraviolet radiation. From the results, we concluded that the laminate was molded supplied homogeneously, not presenting problems such as porosity, delaminations or cracks inside. After a period of 625 hours of exposure to hygrothermal conditioning, we observed a 1,2% maximum of absorption of moisture. Samples subjected to the conditioning by UV irradiation (600 hours) and salt spray showed a reduction of about 24,30% and 32,30%, respectively, on the shear strength (ILSS). In DMA analysis is not observed significant changes on the glass transition temperature. However, when considering the storage modulus of the samples conditioned by UV radiation (1200 hours), salt spray and hygrothermal conditioning there is an increase of 5,34% , 7,19% and 5,57% respectively

Síntese, incorporação e liberação prolongada do tetradecapeptídeo OGP em celulose bacteriana

Este trabalho apresenta o estudo de dois sistemas de liberação prolongada, microemulsão e lipossomas, contendo peptídeo regulatório de fatores de crescimento, “osteogenic growth peptide” OGP, para aplicação em regeneração óssea. A base de adsorção para estes sistemas de liberação foi a celulose bacteriana (CB) produzida pela bactéria Gluconacetobacter xylinus. Foi escolhida devido às suas propriedades físicas e químicas, tais como como alta resistência à corrosão química, bio absorção, biocompatibilidade, porosidade e ainda boa resistência mecânica, o que a torna um biopolímero com grande potencial a ser explorado pela ciência biomédica. Estudos in vitro foram realizados para avaliar o perfil de liberação do peptídeo dos diferentes sistemas de liberação prolongada. O peptídeo OGP foi sintetizado pelo método da fase sólida (estratégia SPFS Fmoc); foi purificado e caracterizado por HPLC, espectrometria de massas e análise de aminoácidos e, em seguida, marcados com 5,6 carboxifluoresceína (CF) para análise por espectroscopia de fluorescência. O peptídeo marcado foi incorporado aos sistemas de liberação no momento do respectivo preparo, foram adsorvidos na CB por um período de 72h, seguido de sua liberação prolongada em sistema fechado de fluxo constante contendo tampão PBS pH 7,4, por um período de 24h. Após a análise da liberação, observou se que o sistema que obteve melhor resultado foi a microemulsão, sendo sua liberação prolongada nas primeiras 6,5 h, liberando 21,5% do valor teórico de peptídeo incorporado, seguido de uma liberação constante a partir desse período. Dessa forma, tem se que a microemulsão pode ser um sistema promissor para liberação prolongada do OGP em processos de regeneração óssea

Sintese e caracterização do compósito TixOy- MWCNT para fotodegradação de carbaril

In this study, a composite of titanium oxide (TixOy) and carbon nanotubes multi-walled (MWCNT) was synthesized on a titanium substrate using the sol-gel method. The electrode obtained (TixOy-MWCNT/Ti) was used to the photodegradation of Carbaryl. The morphology and structure of the TixOy-MWCNT composite were characterized by scanning electron microscopy (SEM), scanning electron microscopy by field emission (FEG-SEM) and X-ray diffraction (XRD). The electrode was evaluated for degradation of Carbaryl (0.9 mmol L-1) in phosphate buffer pH 6, and using chronoamperometry by applying a potential of +1,5 V for 1 h. Using the Ultraviolet-Visible test, the absorbance at 220 nm was collected every 15 min to calculate the percentage of Cabaryl´s degradation. Can be evaluated that the Carbaryl degradation using the TixOy-MWCNT/Ti electrode was 22% more efficient when compared with the electrode without the presence of titanium oxides (MWCNT / Ti)

Identificação simultânea de triterpenos quinonametídeos e alcalóides piridínicos sesquiterpênicos em Maytenus ilicifolia por CLAE - DAD

O presente trabalho teve como objetivo o estudo de isolamento e a identificação dos principais metabólitos especiais presentes nas raízes de Maytenus ilicifolia (Celastraceae). O estudo fitoquímico das cascas das raízes da planta adulta e das raízes da planta jovem resultou no isolamento de quatro substâncias pertencentes a duas diferentes classes de metabólitos especiais, incluindo os alcalóides piridínicos sesquiterpênicos, aquifoliunina E-I e a maiteina e os triterpenos quinonametídeos, pristimerina e maitenina. Este estudo mostrou que o acúmulo desses metabólitos são dependentes do ciclo de desenvolvimento da planta. A análise desses metabólitos por espectrometria de massas permitiu identificar íons de fragmentação característicos dos alcalóides piridínicos sesquiterpênicos e dos triterpenos quinonametídeos. A otimização cromatográfica e análise qualitativa por CLAE-DAD permitiu identificar os alcalóides piridínicos sesquiterpênicos, aquifoliunina E-I, maiteina; e os triterpenos quinonametídeos, pristimerina e maitenina, presentes no extrato de raízes da planta jovem como principais metabólitos constitutivos

Caracterização funcional da proteína XAC1201 envolvida na patogenicidade de Xanthomonas citri subsp. citri

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Impacto geno e citotóxico em populações do caranguejo-uçá, Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ucididae), em manguezais do estado de São Paulo, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo do potencial enzimático hidrolítico e oxidativo do microorganismo Myceliophthora thermophila M.7.7

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da viabilidade de sedimentos formulados para a aplicação em estudos ecotoxicológicos e químicos: ênfase para os interferentes endócrinos 17alfa-etinilestradiol e 17beta-estradiol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cádmio, chumbo, cromo, mercúrio e níquel nos rios do estado de São Paulo e em peixes do Rio Sorocaba (São Paulo, Brasil)

To verify the levels of concentration of some heavy metals in fishes from Sorocaba river (São Paulo, Brazil) and evaluate if this contamination offers health risks to the fishermen, 63 samples of fishes collected from four points along the river were studied for cadmium, lead, chromium, nickel and mercury, with emphasis in this last, since it is the most toxic and most probable as a fish contaminant. Analyzing muscle samples by cold vapor atomic absorption spectrometry it was shown that the fishes are not contaminated. None of the five metals studied were present in prohibitive level and the fishes could be judged secure for human consume. It was also analyzed data from four years of cadmium, lead, chromium, nickel and mercury monitoring made by CETESB, from 1997 to 2000, in water from the main rivers of the State of São Paulo. The study pointed out that the majority of the monitored rivers still present contamination by those metals in a level that requires an improvement of the pollution control actions.

Abordagem metalômica quantitativa de mercúrio em peixes da região amazônica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determination of lead in eye shadow and blush by high-resolution continuum source graphite furnace atomic absorption spectrometry employing directSolid sampling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação dos efeitos ambientais nas propriedades do compósito de poliamida 6,6/fibras de carbono

This graduation work done study of polyamide 6.6/composite carbon fibres, since its processing, characterization of the main properties. Besides the influence of temperature, UV radiation, salt spray and moisture on the mechanical and viscoelastic behavior. To achieve this goal, the first composite was processed from the heat compression molding using known variables of the process and using the empirical method to find the best value for other parameters. The method processing molding was chosen because it common in composites processing in order to evaluate the influence of crystallinity of the properties that influence the mechanical and viscoelastic behavior laminates. From the obtained laminate specimens were evaluated in weathering, such as: in hygrothermal chamber, UV, salt spray and thermal shock. In another step, the effect produced by these constraints were evaluated by optical microscopy, ultrasound, dynamic mechanical analysis and vibration tests. This project was conducted at the Department of Technology and Materials of UNESP in Guaratingueta, where all the equipment and techniques for the implementation of this project met available. After the tests proved the applicability of the composite polyamide 6.6/carbon fibers in aeronautical applications with resistance the main climatic influences

Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar

Pós-graduação em Engenharia Mecânica - FEG