Características Físico-Químicas, energéticas e desempenho da fibra de coco na sorção de óleo diesel e biodiesel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de um sensor de resistencia eletrica e sua correlação com atributos do solo

The electrical measures of the soil have been used as variables that correlate with its characteristics. This study aimed at developing an electrical capacitance sensor of low cost, to evaluate its performance on the field and verify the correlation between the measurements of electrical capacitance with physical properties (sand, silt and clay) and chemical properties of soil (pH, MO, P resin, H + Al, K, Ca, Mg, SB, CTC and V%) and the moisture content. The data sampling was performed at the farm named "Capão da Onça" which belongs to the State University of Ponta Grossa. The samples collection was conducted in an area of approximately 13 hectares, totalizing 81 samples. In each sampling the electrical capacitance of the soil was measured. After the sensor withdrawal, soil samples were collected and sent to be analysed in the laboratory of the College of Agronomics Science of the Paulista State University. The measuring instrument used to collect data on electric capacitance of the soil a digital multimeter was used. The data were submitted to the analysis of correlation and regression. The developed system presented a low cost and it was capable to measuring variation of the electrical capacitance of the soil. The obtained measures satisfactorily correlated with the levels of clay and sand, and weakly with the moisture content. This had demonstrated the possibility to use a sensor to verify the soil texture in not homogeneous areas. The measures of the electrical capacitance of the soil obtained by the sensor had significantly correlated with the soil attributes: calcium, magnesium, pH, SB and CTC. These results had demonstrated the possibility to use a sensor for soil fertility control.

Relação ideal dos aminoácidos essenciais para mantença, crescimento e produção de aves

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de material alternativo para a obtenção e caracterização de biomodelos, por meio da técnica de impressão 3DPRINTER

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de junta aparafusada de biela automotiva

Pós-graduação em Engenharia Mecânica - FEG

Óxidos derivados de hidromagnesitas e hidrotalcitas modificadas como catalisadores heterogêneos na síntese de biodiesel etílico

Pós-graduação em Química - IBILCE

Obtenção de nanofibras de carbono a partir do processo de eletrofiação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese e caracterização de hidrogéis nanoestruturados contendo nanoargila e zeólita com potencialidade de aplicação em sistemas de liberação controlada de fármacos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do comportamento da mecânica respiratória e dos testes de exercício cardiopulmonar no pré e pós-operatório de pacientes submetidos à toracotomia para tratamento de doenças malignas e benignas, sua relação com as complicações pós-operatórias e com a qualidade de vida

Pós-graduação em Bases Gerais da Cirurgia - FMB

Detecção e quantificação de corantes de importância ambiental empregando sensores químicos baseados em fibras ópticas e polímeros molecularmente impressos

Pós-graduação em Química - IQ

Montagem e avaliação de um sistema de varredura a LASER embarcado em VANT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de conídios do fungo entomopatogênico Metarhizium anisopliae em diferentes condições de cultivo e em biorreator de bandeja

Pós-graduação em Microbiologia - IBILCE

Colunas de Winogradsky com águas contaminadas por petróleo e derivados monitoradas por ensaios ecotoxicológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ecologia alimentar de Tatu-Peba, Euphractus sexcinctus (Linnaeus, 1758), na Fazenda Nhumirim, Pantanal da Nhecolância, MS

Studies on feeding ecology are important tools for the understanding of feeding strategies and niche dynamics. Information on the type of food consumed, how, and where it is acquired, enable the elucidation of species behavioral, evolutionary and ecological aspects. The diet study based on fecal material enables a low-cost, informative research and avoids the sacrifice of animals. The general aim of this study is to characterize the diet of Euphractus sexcinctus, the yellow-armadillo, based on fecal samples, to contribute with additional information on their feeding habits. The study was undertaken at the Nhumirim ranch, Pantanal da Nhecolândia, MS, during the months of February and March, 2014. The fecal material was collected during the manual capture of the animals and oven dried at 60°C. The food items found in the feces were sorted using a magnifying glass and separated in the following categories: plant matter, invertebrates and soil. Invertebrates were identified to the order level and the plant matter to the lowest taxonomic level possible. Aiming to evaluate the invertebrate availability in the soil, pitfall traps were installed next to the location where individuals were captured, during the months of April and May. We were able to estimate the frequency with which item was consumed during the studied period, and if there is a relationship between the frequency of consumed invertebrates and their availability environment. Among the analyzed samples, we could observe the frequency of occurrence (FO) of plant matter, invertebrates and soil in all the samples. The main invertebrate orders found in the samples were: Coleoptera, Orthoptera and Hymenoptera, with FO of 100%, 100% and 87,5%, respectively. Seeds were found in 100% of the samples. The FO of the Byrsonima orbignyana was high (62,5%), and evidences the potential of the yellow-armadillos as seed dispersers. The use of other techniques, such as the micro-histological...

Procedimento para homologação de sistemas ecoeficientes para obtenção de créditos de carbono

This paper deals with the homologation process for obtaining carbon credits through the Clean Development Mechanism (CDM), that regulates the greenhouse gases reductions under the rules of the Kyoto Protocol. The CDM evaluates projects through a project cycle, which begins with the preparation of the Project Design Document (PDD) until the project certification to receive Certified Emission Reductions (CERs), popularly known as carbon credits. This study analyzed the implementation of the system Burner Recorder System for Low Flows of Biogas (QRBBV), developed by Marcelino Junior & Godoy (2009), in an eco-friendly wastewater treatment mini-plant (miniEETERA), built at the site of UNESP - Guaratinguetá SP. The QRBBV system is low cost and high reliability, developed to burn the methane generated at sites of low and variable production of biogas, which is not economically justified their energy recovery. Currently, almost all wastewater generated at the site of the campus is being treated by miniEETERA and, as a result, the biogas originated by this activity is being released into the atmosphere. Therefore, the project activity aims to capture and burn the biogas generated by miniEETERA, reducing the negative effects caused by the methane emissions into the atmosphere and, thus, claim to receive carbon credits. This work aimed to demonstrate the project applicability under CDM through the study and preparation of the PDD, as well as an analysis of the entire project cycle required for homologation. The result of the work obtained an estimate of only 20 CERs per year and proved to be economically unviable for approval through the CDM, since the spending with the approval process would not be compensated with the sale of CERs, mainly due the low carbon price in the world market. From an environmental standpoint, the project is perfectly... (Complete abstract click electronic access below)